The Hill-Sachs lesion is an osseous defect of the humeral head that is typically associated with anterior shoulder instability. The incidence of these lesions in the setting of glenohumeral ...instability is relatively high and approaches 100% in persons with recurrent anterior shoulder instability. Reverse Hill-Sachs lesion has been described in patients with posterior shoulder instability. Glenoid bone loss is typically associated with the Hill-Sachs lesion in patients with recurrent anterior shoulder instability. The lesion is a bipolar injury, and identification of concomitant glenoid bone loss is essential to optimize clinical outcome. Other pathology (eg, Bankart tear, labral or capsular injuries) must be identified, as well. Treatment is dictated by subjective and objective findings of shoulder instability and radiographic findings. Nonsurgical management, including focused rehabilitation, is acceptable in cases of small bony defects and nonengaging lesions in which the glenohumeral joint remains stable during desired activities. Surgical options include arthroscopic and open techniques.
The Latarjet procedure is an established surgical treatment for recurrent glenohumeral joint instability with glenoid bone loss. Intraoperatively, the conjoint tendon and its attachement on the ...coracoid bone graft is routed through a split in subscapularis where the graft is fixed to and augments the anteroinferior glenoid. The objective of this in vitro study was to quantify the influence of glenohumeral joint position and conjoint tendon force on the lines of action and moment arms of subscapularis muscle sub‐regions after Latarjet surgery. Eight fresh‐frozen, entire upper extremities were mounted onto a testing apparatus, and a cable‐pulley system was used to apply physiological muscle loading to the major shoulder muscles. The lines of action and moment arms of four subregions of subscapularis (superior, mid‐superior, mid‐inferior, and inferior) were quantified radiographically with the conjoint tendon unloaded and loaded while the shoulder was in (i) 0° abduction (ii) 90° abduction (iii) 90° abduction and full external rotation (ABER), and (iv) the apprehension position, defined as ABER with 30° horizontal extension. Conjoint tendon loading after Latarjet surgery significantly increased the inferior inclination of the lines of action of the mid‐inferior and inferior subregions of subscapularis in the scapular plane in ABER and apprehension positions (p < 0.001), as well as decreased the horizontal flexion moment arm of the inferior subscapularis (p = 0.040). Increased subscapularis inferior inclination may ultimately increase inferior joint shear potential, while smaller horizontal flexion leverage may reduce joint flexion capacity. The findings have implications for Latarjet surgical planning and postoperative rehabilitation prescription.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
BACKGROUND:Despite the increasing numbers of reverse total shoulder arthroplasty (RTSA) procedures, the long-term results have been rarely reported. We previously reported early outcomes of a cohort ...of patients treated with a Grammont-style RTSA. The purpose of this study was to evaluate the outcomes after a minimum of 10 years, and to document prosthetic survival and complications.
METHODS:Clinical outcome assessment was based on the absolute and relative Constant scores and the active range of motion. Radiographic evaluations of scapular notching, tuberosity osteolysis, and periprosthetic radiolucent lines were done as well. Complications and revisions were compiled, and a Kaplan-Meier survival analysis was performed.
RESULTS:The original report included the outcomes for 186 patients (191 RTSAs) who had been followed for a mean of 40 months. In the present study, in which the mean duration of follow-up was 150 months, follow-up clinical evaluations were available for 84 patients (87 prostheses) and radiographic assessments were available for 64 patients (67 prostheses). Seventy-seven patients (79 prostheses) had died before the 10-year follow-up, and 17 patients (17 prostheses) had been lost to follow-up. The mean absolute and relative Constant scores (and standard deviations) were 55 ± 16 points and 86 ± 26 points, respectively, with both having decreased significantly compared with the scores at the medium-term follow-up evaluation (at a minimum of 2 years) (p < 0.001 and p = 0.025, respectively). Forty-nine shoulders (73%) exhibited scapular notching. Forty-seven complications (29%) were recorded, with 10 cases (10%) occurring after 2 years. Sixteen (12%) of the original patients underwent revision surgery. The 10-year overall prosthetic survival rate using revision as the end point was 93%.
CONCLUSIONS:Despite a high arthroplasty survival rate and good long-term clinical results, RTSA outcomes showed deterioration when compared with medium-term results. The cause of this decrease is probably related to patient aging coupled with bone erosion and/or deltoid impairment over time.
LEVEL OF EVIDENCE:Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.
BACKGROUND:Glenoid component malposition for anatomic shoulder replacement may result in complications. The purpose of this study was to define the efficacy of a new surgical method to place the ...glenoid component.
METHODS:Thirty-one patients were randomized for glenoid component placement with use of either novel three-dimensional computed tomographic scan planning software combined with patient-specific instrumentation (the glenoid positioning system group), or conventional computed tomographic scan, preoperative planning, and surgical technique, utilizing instruments provided by the implant manufacturer (the standard surgical group). The desired position of the component was determined preoperatively. Postoperatively, a computed tomographic scan was used to define and compare the actual implant location with the preoperative plan.
RESULTS:In the standard surgical group, the average preoperative glenoid retroversion was −11.3° (range, −39° to 17°). In the glenoid positioning system group, the average glenoid retroversion was −14.8° (range, −27° to 7°). When the standard surgical group was compared with the glenoid positioning system group, patient-specific instrumentation technology significantly decreased (p < 0.05) the average deviation of implant position for inclination and medial-lateral offset. Overall, the average deviation in version was 6.9° in the standard surgical group and 4.3° in the glenoid positioning system group. The average deviation in inclination was 11.6° in the standard surgical group and 2.9° in the glenoid positioning system group. The greatest benefit of patient-specific instrumentation was observed in patients with retroversion in excess of 16°; the average deviation was 10° in the standard surgical group and 1.2° in the glenoid positioning system group (p < 0.001). Preoperative planning and patient-specific instrumentation use resulted in a significant improvement in the selection and use of the optimal type of implant and a significant reduction in the frequency of malpositioned glenoid implants.
CONCLUSIONS:Novel three-dimensional preoperative planning, coupled with patient and implant-specific instrumentation, allows the surgeon to better define the preoperative pathology, select the optimal implant design and location, and then accurately execute the plan at the time of surgery.
LEVEL OF EVIDENCE:Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.
Rotator Cuff Repair McElvany, Matthew D.; McGoldrick, Erik; Gee, Albert O. ...
The American journal of sports medicine,
02/2015, Volume:
43, Issue:
2
Journal Article
Peer reviewed
Background:
Rotator cuff tears are common, and rotator cuff repair represents a major health care expense. While patients often benefit from rotator cuff repair, anatomic failure of the repair is not ...unusual.
Purpose:
To identify the published evidence on the factors associated with retears and with suboptimal clinical outcomes of rotator cuff repairs.
Study Design:
Systematic review and meta-analysis of articles with evidence levels 1-4.
Methods:
A total of 2383 articles on rotator cuff repairs published between 1980 and 2012 were identified. Only 108 of these articles, reporting on over 8011 shoulders, met the inclusion criteria of reporting quantitative data on both imaging and clinical outcomes after rotator cuff repair. Factors related to the patients, their shoulders, the procedures, and the results were systematically categorized and submitted for meta-analysis.
Results:
While the number of relevant articles published per year increased dramatically over the period of the study, the clinical and anatomic results did not show improvement over this period. The weighted mean retear rate was 26.6% at a mean of 23.7 months after surgery. Retears were associated with more fatty infiltration, larger tear size, advanced age, and double-row repairs. Clinical improvement averaged 72% of the maximum possible improvement. Patient-reported outcomes were generally improved whether or not the repair restored the integrity of the rotator cuff. The inconsistent and incomplete data in the published articles limited the meta-analysis of factors affecting the outcome of rotator cuff repair.
Conclusion:
In spite of a dramatic increase in the number of publications per year, there is little evidence that the results of rotator cuff repair are improving. The information needed to guide the management of this commonly treated and costly condition is seriously deficient. To accumulate the evidence necessary to inform practice, future clinical studies on the outcome of rotator cuff repair must report important data relating to each patient’s condition, the surgical technique, the outcome in terms of integrity, and the change in patient self-assessed comfort and function.
Full text
Available for:
FSPLJ, NUK, OILJ, SAZU, UKNU, UL, UM, UPUK
To investigate preoperative factors associated with selection of surgical treatment for anterior shoulder instability.
Patient demographics, initial physical examinations, and patient-oriented ...outcome questionnaires were collected prospectively from 26 shoulder surgeons at 10 sites. Symptom duration, number of dislocations, sport, history of prior stabilization procedure, Hill-Sachs/glenoid bone loss, pain level, and failure of conservative treatment were recorded. Statistical analysis was performed with Fisher's exact test and logistic regression analysis.
A total of 564 patients who underwent surgical treatment for anterior shoulder instability from November 2012 to June 2017 were enrolled. Of these, 426 shoulders underwent arthroscopic stabilization alone, 38 underwent arthroscopic stabilization with remplissage, 28 underwent open Bankart repair, and 72 underwent a Latarjet procedure. Predictors for undergoing Latarjet (P < .003) were symptom duration (75% had symptoms for >1 year), number of dislocations (47% had >5 dislocations), revision surgery (69%), Hill-Sachs lesion size (45% had a lesion between 11% and 20% of the humeral head), and glenoid bone loss (75% of Latarjet patients had 11% to 30% loss). Predictors for undergoing open Bankart repair (P < .001) were number of dislocations (32% had >5 dislocations), revision surgeries (54%), and glenoid bone loss (11% of open Bankart patients had 11% to 20% loss). History of prior shoulder surgery was the only significant predictor of open versus arthroscopic Bankart procedure. Prediction models showed athletes involved in high-risk sports were 2.61 times more likely to have a Latarjet (P < .01).
Indications for the Latarjet were: humeral and glenoid bone loss, duration of symptoms, number of dislocations, and revision stabilizations. Athletes involved in high-risk sports were more likely to undergo the Latarjet procedure, even if other predictive factors were not present. The open Bankart procedure was the least common procedure performed, with a history of prior shoulder surgery being the only predictor for use when treating recurrent instability.
Level II, prospective prognostic cohort investigation.
Background Biconcave glenoids in primary osteoarthritis represent a challenge because of the associated static posterior instability of the humeral head and secondary posterior glenoid erosion. This ...study evaluated the influence of different preoperative radiographic measurements on the outcome of total shoulder arthroplasty (TSA), particularly regarding the development of complications. Materials and methods We retrospectively evaluated 92 anatomic TSAs performed in 75 patients with primary osteoarthritis and a biconcave glenoid. All patients underwent preoperative imaging with an axial computed tomography arthrogram. Measurements were taken for posterior bone erosion depth and ratio as well as humeral head subluxation. Clinical outcomes were evaluated with the Constant score. Results At an average follow up of 77 months (range, 14-180 months), 15 revisions (16.3%) were performed for glenoid loosening (6.5%), posterior instability (5.5%), or soft tissue problems (4.3%). At the final follow-up, the mean Constant score improved significantly from 32.4 to 68.8 points ( P = .0001). Subjectively, 66.3% of patients were very satisfied or satisfied. Glenoid loosening was observed in 20.6% and was significantly associated with posterior bone erosion in depth ( P = .005) and wear ratio ( P = .02), humeral head subluxation ( P = .01), and neoglenoid ( P = .002) and intermediate glenoid retroversion ( P = .001). Dislocation was correlated only with neoglenoid retroversion ( P = .01). Conclusions Performing TSA in patients with osteoarthritis and biconcave glenoids resulted in acceptable clinical outcomes but a very high rate of complications. We found that the preoperative measurement of the neoglenoid retroversion was best for predicting postoperative complications in terms of glenoid loosening and dislocation.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Background Propionibacterium acnes is a common pathogen in infections after shoulder surgery. Recent reports found positive P acnes cultures in a high percentage of patients who had revision shoulder ...arthroplasty for “aseptic loosening” without any overt signs of infection. Isolation of P acnes is difficult, and by use of conventional microbiological protocols of 48-hour incubation, a considerable proportion of patients with possible P acnes infection may remain unidentified. We recently noted P acnes in shoulder joint cultures in patients undergoing primary shoulder replacement for glenohumeral arthropathy without any signs of infection. Methods We collected aspirates and biopsy specimens from 55 consecutive patients with arthritic shoulders undergoing primary joint replacement and examined them for the presence of P acnes . Special measures were taken to ensure that the specimens were carefully taken from within the joint to reduce the risk of contamination to minimal. Results In 23 of 55 consecutive patients (41.8%) undergoing primary shoulder joint replacement, P acnes was found in the joint fluid and tissues taken before the insertion of the implants. All these patients were treated early postoperatively with pathogen-directed specific dual oral antibiotic treatment for 4 weeks. In none have any signs of infection developed. Discussion and conclusion This finding of a high incidence of P acnes in joints before arthroplasty may suggest a role of P acnes in the pathogenesis of glenohumeral arthropathy. In addition, it raises the question of whether development of painful joint replacement later on and presumed aseptic loosening do, in fact, comprise an unrecognized low-grade infection that has been present since before the index operation.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Glenoid lateralization has been shown to be the most imortant factor in maximizing passive range of motion and shoulder stability while preventing scapular impingement and notching. We aimed to ...evaluate mid- to long-term functional and radiologic outcomes after bony increased-offset–reverse shoulder arthroplasty (BIO-RSA) using a Grammont-style (medialized) humeral implant.
The study included 143 consecutive shoulders (140 patients; mean age, 72 years) treated with a BIO-RSA for rotator cuff deficiency. A cylinder of autologous cancellous bone graft, harvested from the humeral head, was placed between the reamed glenoid surface and baseplate; fixation was achieved using a long central peg (25 mm) and 4 screws. A large baseplate (29 mm) with a small baseplate sphere (36 mm) was used in 77% of cases, and a Grammont-style (medialized) humeral implant with 155° of inclination was used in all cases. All patients underwent clinical and radiographic assessment at a minimum of 5 years after surgery; in addition, 86 cases (60%) underwent computed tomography scan assessment.
At a mean follow-up of 75 months (range, 60-126 months), the survivorship of the BIO-RSA using revision as an endpoint was 96%. No cases of dislocation or humeral loosening were observed. Overall, 118 patients (83%) were either very satisfied (61%) or satisfied (22%). The adjusted Constant score improved from 40% ± 18% to 93% ± 23%, and the Subjective Shoulder Value improved from 31% ± 15% to 77% ± 18% (P < .001). The humeral bone graft incorporated completely in 96% of cases (137 of 143). Severe inferior scapular notching (grade 3 or 4) occurred in 18% (24 of 136). The risk of postoperative notching correlated to a lower body mass index (P < .05), superior glenosphere inclination (P = .02), and high or flush glenosphere positioning (P = .035).
BIO-RSA is a safe and effective technique to lateralize the glenoid, providing consistent bone graft healing, excellent functional outcomes, a low revision rate, and a high rate of patient satisfaction. Thin patients (with a low body mass index) and glenosphere malposition (with persistent superior inclination and/or insufficient lowering of the baseplate and sphere) are associated with higher risk of scapular notching.Our data confirm the importance of implanting the baseplate with a neutral inclination (reverse shoulder arthroplasty angle < 5°) and with sufficient glenosphere inferior overhang (>5 mm) in preventing scapular notching. The use of a less medialized humeral implant (135° or 145° inclined) and smaller (25-mm) baseplate (when using a small, 36-mm sphere) should allow reduction in the incidence of scapular notching.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Background:
The glenoid track concept has been widely used to assess the risk of instability caused by a bipolar lesion. The mean glenoid track width is reported to be 83% of the glenoid width. ...However, this width seems to be affected by the range of motion of the shoulder. By clarifying the relationship between the range of shoulder motion and the glenoid track width, a more precise determination of the glenoid track width for each individual could be possible.
Purpose:
To determine the relationship between the glenoid track width and the range of motion of healthy volunteers.
Study Design:
Descriptive laboratory study.
Methods:
Magnetic resonance imaging was taken in 41 shoulders of 21 healthy volunteers (mean age, 32 years) with the arm in maximum horizontal extension, with the arm kept in 90° of abduction and 90° of external rotation. Three-dimensional surface bone models of the glenoid and the humerus were created with image analysis software. The distance from the anterior rim of the glenoid to the medial margin of the footprint of the rotator cuff tendon was defined as the glenoid track width. Active and passive ranges of shoulder motion were measured in the supine and sitting positions. The correlations between the glenoid track width and the ranges of shoulder motion were investigated with Pearson correlation coefficients. Intra- and interobserver reliabilities based on the intraclass correlation coefficient were also analyzed to assess the reliability of the glenoid track measurement.
Results:
The intra- and interobserver reliabilities for the glenoid track measurement were excellent (0.988 and 0.988, respectively). Among all the measurements, the glenoid track width and the active range of motion in horizontal extension in the sitting position showed the greatest correlation coefficient (r = −0.623, P < .0001). A correlation between the glenoid track width and this angle was expressed as Y = −0.49X + 90, where X is the horizontal extension angle (degrees) and Y is the glenoid track width (percentage of glenoid width).
Conclusion:
The present data demonstrate that the greater the horizontal extension angle in abduction and external rotation, the smaller the glenoid track width. An individualized glenoid track width can be obtained by measuring the active horizontal extension angle with the arm in abduction and external rotation in the sitting position.
Clinical Relevance:
An individualized glenoid track width enables selection of a more precise surgical option by the on-track/off-track concept.
Full text
Available for:
FSPLJ, NUK, OILJ, SAZU, UKNU, UL, UM, UPUK
