Akademska digitalna zbirka SLovenije - logo
(UL)
  • The influence of friction stir spot welding parameters on the strength of Al-3%Mg alloy AA5754 [Elektronski vir]
    Klobčar, Damjan ; Tušek, Janez, 1952- ; Smolej, Anton, 1941-
    A parametric analysis of aluminium-3% magnesium alloy AA5754 lap joints made by the friction stir spot welding (FSSW) is presented. Experimental plan was done according to the response surface ... methodology (RSM), where the tool rotation speed varied between 988 and 3511 rpm, the plunge rate between 24.4 and 150 mm/min and the dwell time between 1 and 3.5 s. The plunge depth was held constant at 0.4 mm. The welds were tensile-shear tested and the microstructure was analysed. Mathematical models describing the relationship between welding parameters and spot strength, axial force and rotational moment were developed and the optimal FSSW parameters were established.
    Source: International Conference on Joining Materials, May 5 - May 8, 2013, Konventum Lo Skolen, Helsingør, Denmark [Elektronski vir] : JOM 17 (Mapa: Session-V, datoteka: Clobcar_Influence of FSSW Tool (8 str.))
    Type of material - conference contribution
    Publish date - 2013
    Language - english
    COBISS.SI-ID - 12907547

Shelf entry