-
The influence of extrusion ratio on contact stresses and die elastic deformations in the case of cold backward extrusionPepelnjak, Tomaž ...In this paper, the distribution of contact stresses along the die-workpiece interface as well as elastic deformation behavior of the die in the cold backward extrusion of steel billets have been ... investigated both experimentally and numerically. For the experiments, a special tooling set including a pin load cell measuring device was designed and made. Contact stresses were recorded at various points in time and at various locations during the extrusion process, i.e. for different punch strokes (partʼs bottom thickness). The research focus was on determining the extrusion ratioʼs influence on the distribution of the contact stresses and therefore the experiments were performed using five punches of different head diameters. In the next step, based on the measured contact stresses, radial displacements of the inner die wall were calculated by applying Lameʼs equation. Furthermore, an extended finite element analysis of the investigated extrusion process was carried out using Simufact.forming software. The results of numerical simulations for the contact stresses were compared with experiments. The benefits and weaknesses of the pin load cell measuring technique and Lameʼs formula when it is employed for determination of the die elastic deformation were also examined, as well as were the contribution of the die elastic deformation to dimensional errors of the extruded parts.Source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 62, no. 1, Jan. 2016, str. 41-50, SI 7)Type of material - article, component partPublish date - 2016Language - englishCOBISS.SI-ID - 14445083
Author
Pepelnjak, Tomaž |
Milutinović, Mladomir |
Plančak, Miroslav |
Vilotić, Dragiša |
Randjelović, Saša |
Movrin, Dejan
Topics
backward extrusion |
contact stresses |
die elastic deformation |
pin load cell |
finite element method |
protismerno iztiskavanje |
kontaktne napetosti |
elastična deformacija matrice |
palična tlačna merilna celica |
metoda končnih elementov
source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 62, no. 1, Jan. 2016, str. 41-50, SI 7)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Pepelnjak, Tomaž | 12957 |
Milutinović, Mladomir | |
Plančak, Miroslav | |
Vilotić, Dragiša | |
Randjelović, Saša | |
Movrin, Dejan |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.