E-resources
Peer reviewed
-
Bai, Yuchao; Yang, Yongqiang; Wang, Di; Zhang, Mingkang
Materials science & engineering. A, Structural materials : properties, microstructure and processing, 08/2017, Volume: 703Journal Article
Selective laser melting (SLM) is one kind of additive manufacturing process to fabricate metal parts through laser melting. A maraging steel 300 was manufactured by SLM. And the influence of process parameters (laser powder, scanning speed and scanning space) on the relative density of maraging steel 300 was investigated first. Then a series of block and plate specimens were manufactured. Some specimens were taken as control groups, and others underwent heat treatment by solution treatment (ST) and solution treatment +aging treatment (ST+AT) respectively. The investigation involved microstructure, microhardness, tensile strength and impact toughness. It is shown that: low or high laser power, scanning speed or scanning space all reduced the relative density, and the optimized process parameters could be obtained by orthogonal experiment. After ST, the cellular structure and microscopic segregation disappeared, and the new smaller particles precipitated out after AT. The Ni, Mo and Ti dissolved in the matrix during ST separated out again forming tiny Ni3Mo, Fe2Mo and Ni3Ti particles during AT. The microhardness and tensile strength dropped a little with elongation increasing after ST. While they increased significantly with elongation decreasing after AT. The impact toughness increased little after ST, but decreased sharply after AT.
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|
Source: Personal bibliographies
and: SICRIS
The material is available in full text. If you wish to order the material anyway, click the Continue button.