VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
A 3D CFD-based workflow for analyses of a wide range of flow and heat transfer conditions in air gaps of electric machines [Elektronski vir]Žnidarčič, Anton ; Katrašnik, TomažIncreasing power densities of electric machines in e-vehicles in addition to the resulting quest for enhanced cooling concepts are bringing forward the importance of defining adequate heat transfer ... correlations in air gaps. This is a highly challenging topic, as there exist no generally applicable flow and heat transfer phenomena descriptions for air gaps due to their highly variable geometrical properties and operating conditions. As an answer to this challenge, this paper presents a workflow that defines an adequate 3D CFD model for an arbitrary air-gap design that includes its system-dependent boundary conditions. The workflow is built on the recognition of underlying air-gap flow phenomena, which are used to steer the subsequent design of the 3D CFD model in a systematic step-by-step manner. Consequently, the complexity of the 3D CFD model gradually increases to the point where it provides an adequate flow and heat transfer description. Validation of the workflow is presented for a wide range of air-gap designs and flow conditions. It is demonstrated that the 3D CFD models obtained with the workflow match the experimentally obtained data from various flow cases that have been documented in the literature. Considerable optimization of computational costs, offering potentially an order-of-magnitude reduction in computational time, is achieved as a result of computational domain span optimization and transient simulations being applied only when required. The validation confirms that this workflow facilitates construction of valid 3D CFD models without the prior knowledge of flow and heat transfer phenomena in a specific air gap. This workflow thus provides a reliable and computationally efficient tool for valorization of convective heat transfer, and opens up prospects for time- and cost-efficient optimizations of electric machines’ cooling system designs.Vir: Fluids [Elektronski vir]. - ISSN 2311-5521 (Vol. 7, iss. 8, 2022, str. 1-28)Vrsta gradiva - e-članekLeto - 2022Jezik - angleškiCOBISS.SI-ID - 118272003
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Žnidarčič, Anton | 50074 |
Katrašnik, Tomaž | 23468 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: