VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Dynamics of a clapper-to-bell impactKlemenc, Jernej ; Rupp, Andreas ; Fajdiga, MatijaChurch bells are exposed to severe loading conditions during ringing, which results in different damage modes due to material wear, fatigue loading, material deficiencies, different clapper-to-bell ... layouts, etc. As part of the activities of an EU-funded project called Maintenance and Protection of Bells (PROBELL), experimental investigations and finite-element simulations of the local contact between the clapper and the bell were carried out to study the wear-related damage to bells. First a simplified model was built to assess under the laboratory-controlled conditions the consequences of the repetitive impacts between a spherical body made from steel and a flat block made from bronze. After the results of the finiteelement simulations for a simplified model were in reasonable agreement with the measured data a full-scale finite-element model for simulating the repetitive clapper-to-bell strokes was built. The simulations with the full-scale model were performed for variations of the parameters that influence the structural behaviour of the bell and the clapper: the clapper material, the clapper mass, the relative impact velocity of the clapper, the shape of the clapper, the clappers pin support, the clappers impact angle, the clappers guide accuracy, the bells sound-burp thickness and the coefficient of friction between the clapper and the bell. The agreement between the simulated and the measured results and the relation between the local stressestrain state and the damage to the bell in the contact area are discussed.Vir: International Journal of Impact Engineering. - ISSN 0734-743X (Vol. 44, iss. 6, Jun. 2012, str. 29-39)Vrsta gradiva - članek, sestavni delLeto - 2012Jezik - angleškiCOBISS.SI-ID - 12166171
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: International Journal of Impact Engineering. - ISSN 0734-743X (Vol. 44, iss. 6, Jun. 2012, str. 29-39)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Klemenc, Jernej | 16334 |
Rupp, Andreas | ![]() |
Fajdiga, Matija | 00819 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: