VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Investigation of machining parameters in thin-walled plate milling using a fixture with cylindrical support headsNatarajan, Muthu Mekala ; Chinnasamy, Balamurugan ; Alphonse, Bovas Herbert BejaxhinConstruction, processing, biomedical instruments, electronics, automobiles, and aerospace widely use thin-wall parts. Mostly, these thinwalled parts are machined using either a peripheral milling ... machine or an end milling machine with the help of fixtures. In this study, three different material thin-walled parts (i.e., Inconel 718, AISI 316L, and Al 6061) are machined in end milling using a newly designed fixture with cylindrical heads, and the surface roughness and deformation with different machining parameters are compared. The optimum values of the machining parameters feed, speed, and depth of cut have been found to improve the surface roughness of thin-walled plates by arresting the deformation using the proposed fixture. Analysis of variance (ANOVA) results show that the speed is the most influential parameter in the case of displacement for AISI 716L and Al 6061, feed is the most influential parameter in the case of surface roughness for Inconel 718 and AISI 716L, and speed is the most influential parameter in the case of displacement and surface roughness for Al 6061. The use of fixtures provides a significant reduction in the deformation and surface roughness during the machining in end milling machine.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 68, no. 12, Dec. 2022, str. 746-756)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2022Jezik - angleškiCOBISS.SI-ID - 137409795
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 68, no. 12, Dec. 2022, str. 746-756)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Natarajan, Muthu Mekala | |
Chinnasamy, Balamurugan | |
Alphonse, Bovas Herbert Bejaxhin |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: