VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Adhesive- and metal-free assembly techniques for prefabricated multi-layer engineered wood products [Elektronski vir] : a review on wooden connectorsHan, Lei ...Engineered wood products (EWPs) are being increasingly used as construction materials. EWPs are currently being made using synthetic adhesives or metal fasteners, which lead to poor recyclability and ... reusability. Therefore, this review paper focused on emerging adhesive- and metal-free assembling techniques including wood dowels, rotary-dowel welding, wooden nails, and dovetail joining as alternative ways of making prefabricated EWPs. This will contribute towards green construction and optimising the building process to minimise its negative impact on the environment and its inhabitants, while maximising the positive aspects of the finished structure. The respective advantages and shortcomings will be compared with those of equivalent EWPs. In general, the dowel-laminated timber (DLT) provides sufficient load-bearing capacity and even better ductility than EWPs of equivalent size, but its relatively low stiffness under a bending load limits its application as a structural element. Optimised manufacturing parameters such as dowel species, dowel spacing, dowel diameter, dowel insertion angle, dowel shape, etc. could be studied to improve the stiffness. The improved mechanical properties and tight fitting due to set-recovery of densified wood support its use as sustainable alternatives to hardwood dowels in DLT to overcome problems such as the loosening of connections over time and dimensional instability. The rotary welding technology could also enhance the strength and long-term performance of dowel-type joints, but its poor water resistance needs further investigation. The main obstacles to implementing DLT products in the market are missing technical information and design guidelines based on national codes.Vir: Forests [Elektronski vir]. - ISSN 1999-4907 (Vol. 14, iss. 2, art. 311, 2023, str. 1-28)Vrsta gradiva - e-članek ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 141029891
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Han, Lei | 54957 |
Kutnar, Andreja | 31274 |
Sandak, Jakub Michal | 50461 |
Šušteršič, Iztok, 1983- | 34161 |
Sandberg, Dick |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: