VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The Effect of different additives on interfacial properties and ehd friction of steel/steel contact at 25 °C and 100 °C [Elektronski vir]Polajnar, Marko ...Tailoring the friction in EHD contacts is of great importance for all non-conformal contacts such as bearings, cam-followers, gears, etc. In addition to conventional EHD parameters, recent studies ... suggest significant EHD friction reduction, via two possible mechanisms, namely either thermal-insulating influence of insulating surfaces layers or solid-liquid interface slip due to weak boundary interactions. So far, analyses have shown that both mechanisms may have importance, but more information is required. In this study we investigate how different additives (glycerol Monooleate, Ionic liquid and Organic film former) that adsorb to the surface and so change its surface energy affect the EHD friction in steel/steel contacts where no heat-insulating layers were adopted. Two different operating temperatures, namely 25 °C and 100 °C, were studied. The results show that the additives notably affect the EHD friction due to formation of the boundary film, which depends on simultaneous effect of the additive type, lubricant bulk temperature and contact conditions, which may, however, increase or decrease. The thus results show that the glycerol Monooleate and Ionic liquid promote EHD friction reduction at 100 °C, namely up to about 9 %, their effect on EHD friction at 25 °C is low and even neglegible. On the other hand, organic film former increases EHD friction up to 4 % at 25 °C, while its effect on EHD friction at 100 °C in neglegible. The changes in EHD friction are in a good agreement with surface energies of adsorbed boundary films, indicating decrease in EHD friction in case of low surface energy adsorbed layer and vice versa. The changes in viscosity due to additive addition were also considered in analysis and were found rather small and not to influence the above mentioned effects.Vir: ECOTRIB 2017 [Elektronski vir] (PDF datoteka (1 f.))Vrsta gradiva - prispevek na konferenciLeto - 2017Jezik - angleškiCOBISS.SI-ID - 15589403
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Polajnar, Marko | 33657 |
Kalin, Mitjan | 14556 |
Thiébaut, Benoît | ![]() |
Jarnias, Frederic | ![]() |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: