-
Optimization of hybrid manufacturing for surface quality, material consumption and productivity improvementGrguraš, Damir ; Kramar, DavorinThis paper presents hybrid manufacturing process of 3D printing and milling. Fused deposition modeling (FDM) has been applied to improve product manufacturing performance, afterwards, milling was ... used to improve outer surface roughness. Today's FDM systems rely on the use of standard nozzle size with a diameter of D[sub]1 = 0.4 mm. To achieve shorter production times a bigger nozzle size (diameter D[sub]2 = 1.1 mm) has been used in this research. Optimization of technological parameters of hybrid manufacturing was carried out according to the minimal time of production, a minimal final surface roughness and minimal usage of material. In addition, these results were compared with optimal results obtained with the standard nozzle size. Significantly shorter production time, without affecting surface quality, was achieved when using bigger nozzle size.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 63, no. 10, Oct. 2017, str. 567-576, SI 83)Vrsta gradiva - članek, sestavni delLeto - 2017Jezik - angleškiCOBISS.SI-ID - 15707931
Avtor
Grguraš, Damir |
Kramar, Davorin
Teme
hybrid manufacturing |
fused deposition modeling |
milling |
manufacturing space homogeneitya PLA material |
design of experiments - DOE |
empirical modeling and optimization |
response surface methodology - RSM |
hibridna izdelava |
ciljno nalaganje taljenega polimera |
frezanje |
material PLA |
načrtovanje eksperimentov |
empirično modeliranje in optimizacija |
metodologija odzivne površine
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Grguraš, Damir | 38150 |
Kramar, Davorin | 17076 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.