Akademska digitalna zbirka SLovenije - logo
VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Optimization of the process parameters for stabilization and improvement of the turning process capability
    Čerče, Luka ; Borojevic, S. ; Kramar, Davorin
    The paper deals with a narrow tolerances turning process. A statistical process control (SPC) on the existent machining process showed that the process was not stable and incapable. Before the ... machining process analysis a measurement system analysis (MSA) of the applied measuring system has been performed. In order to stabilize the process the machine tool linear axis calibration has been performed. The stability and capability of the machining process increased but the problem of the roundness was still present. The possible process parameters, which could affect the roundness, were examined with the design of the experiment methodology (DOE). The results showed that the clamping force has the largest effect. Therefor a new clamping fixture was suggested to eliminate the roundness problem.
    Vir: Proceedings (Str. 15-20)
    Vrsta gradiva - prispevek na konferenci
    Leto - 2018
    Jezik - angleški
    COBISS.SI-ID - 16337435

    Povezava(-e):

    http://www.mma.ftn.uns.ac.rs/files/MMA2018-PROCEEDINGS.pdf

Vnos na polico