Akademska digitalna zbirka SLovenije - logo
VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
Celotno besedilo
  • Krmiljenje dvomotornega asinhronskega sklopa za testiranje življenske [!] dobe polimernih zobnikov [Elektronski vir] = Control of coupled asynchronous drives for fatigue test rig of polymer gears
    Finkšt, Tomaž ...
    Testing of products and components is very important in order to assure quality, correct functioning and long life of products. Gear meshing conditions depend on the tooth flank geometry. The ... temperature of a meshing gear pair raises because of the friction between two meshing flanks and hysteresis warming of the material. The increase of temperature has a significant impact on the mechanical properties of polymer materials. Testing was performed on the designed test equipment using a polymer gear pair with transmission ratio i=1, module m=1mm, number of teeth z=20 and a center distance of 20 mm. The material of tested gears was POM for the driver gear and PA6 for the driven gear. Gears of similar size are typically used for micro gear transmissions. The tests were carried out at different speeds and loading torques. During the tests the temperature of the tested gears was measured with a thermal camera.
    Vrsta gradiva - prispevek na konferenci ; neleposlovje za odrasle
    Leto - 2019
    Jezik - slovenski
    COBISS.SI-ID - 17106459



    Dostop z geslom, ki je navedeno v Indexu