-
The influence of chemical composition of high-speed steels on the wear during cutting and erosion tests [Elektronski vir]Dobrzanski, Leszek A. ...ǂThe ǂpaper presents the results of investigations of the 5% cobalt and 2% molybdenum additions in the W-Mo-V and W-V high-speed steels of the 9-2-2, 11-2-2 and 11-0-2 types with economically ... designed chemical composition on the wear mechanism during cutting and erosion tests. The 5% cobalt addition results in increasing the secondary hardness effect by 1.6 to 1.9 HRC, depending on a steel grade. Secondary hardness effect is caused by the dispersive carbides of the M4C3 type and martensite transformation of the retained austenite. The maximum secondary hardness effect about 66.3-67.6 HRC, depending on a grade of steel, occurs in each steel after tempering at 540°C and austenitizing at 1240°C. The 5% cobalt addition results in enhancing the working properties of tools, longer tool life and makes it possible to increase cutting speed by about 50%, compared with the steels of identical concentration of other alloying elements but without cobalt addition. Cobalt does not have any significant influence on erosion resistance, which is independent of the steel hardness but depends on molybdenum addition in steel.Vir: COBEM 99 [Elektronski vir] (S3 Materials Science, aaeefh.pdf (10 str.))Vrsta gradiva - prispevek na konferenciLeto - 2000Jezik - angleškiCOBISS.SI-ID - 3708699
Avtor
Dobrzanski, Leszek A. |
Kasprzak, Wojciech |
Adamiak, Marcin |
Soković, Mirko |
Kopač, Janez, 1949- |
D'Errico, Giampaolo
Teme
jekla zelo hitra |
kobalt |
molibden |
analize efektov |
trdnost |
trdota |
parametri rezanja |
odpornost obrabna |
high-speed steels |
cobalt |
molybdenum |
secondary hardness effect |
precipitation strengthening effect |
cutting ability |
erosion resistance
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Soković, Mirko | 09001 |
Kopač, Janez, 1949- | 06883 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.