-
Predicting the thickness of zero-strength layer in timber beam exposed to parametric firesHuč, Sabina, gradbeništvo ; Pečenko, Robert ; Hozjan, Tomaž, gradbeništvoIn the design of timber structures, the mechanical resistance in fire conditions has to be ensured among others. In the European standards, Eurocodes, the reduced cross-section method is given to ... determine mechanical resistance of timber structural elements in fire conditions. The reduced cross-section method is based on an effective cross-section that is determined by two key parameters, namely the charring depth and the thickness of zero-strength layer where the latter accounts for the reductions of the stiffness and the strength of timber due to elevated temperatures. Although, the thickness of zero-strength layer of 7 mm is only prescribed for the ISO 834 standard fire exposure longer than 20 min in the Eurocodes, the same value is often used for non-standard fire exposures as well, which might not always be correct. Thus, in the present paper the thickness of zero-strength layer is investigated for a timber beam exposed to 44 different parametric fires by means of advanced numerical models and a simple design method. A hygro-thermal model and a mechanical model are applied to determine the temperature field over a timber beam cross-section and the mechanical resistance of the beam during fire exposure, respectively. The simple design method is based on the reduced cross-section method. The obtained results show that the thickness of zero-strength layer varies between 8.4 mm and 30.5 mm, which are substantially higher values than the value of 7 mm suggested in the Eurocodes for the standard fire exposure. The results also indicate that the thickness of zero-strength layer is not a constant value and should be written as a function of the parameters defining a parametric fire curve. Alternatively, the effective cross-section could be simply determined by finding the combined thickness of zero-strength layer and charring depth at temperature of about 90 °C.Vir: Engineering structures. - ISSN 0141-0296 (Št. feb., art. 111608, letn. 229, 2021, [11] str.)Vrsta gradiva - članek, sestavni delLeto - 2021Jezik - angleškiCOBISS.SI-ID - 42650371
Avtor
Huč, Sabina, gradbeništvo |
Pečenko, Robert |
Hozjan, Tomaž, gradbeništvo
Teme
debelina oglenenja |
požarna odpornost |
parametričen požar |
metoda zmanjšanega prereza |
lesen nosilec |
debelina nenosilnega sloja |
numerično modeliranje |
charring depth |
fire resistance |
parametric fire |
reduced cross-section method |
timber beam |
zero-strength layer |
numerical modelling
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Huč, Sabina, gradbeništvo | 37293 |
Pečenko, Robert | 34368 |
Hozjan, Tomaž, gradbeništvo | 25423 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.