Akademska digitalna zbirka SLovenije - logo
VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Residual stresses on flat specimens of different kinds of grey and nodular irons after laser surface remelting
    Grum, Janez, 1946- ; Šturm, Roman, 1965-
    Laser surface remelting is one of the best procedures for surface modification of ferrite-pearlite nodular irons. Using this procedure on cast irons it is possible to achieve a very high wear ... resistance, which can be compared with the wear resistance of surface hardened heat treatable steels. The properties of the modified layer depend on the microstructure before heat treatment and on the amount of energy input transferred into the surface layer of the specimen. The research work was focused on the study of residual stresses after laser surface remelting of different kinds of gray and nodular irons. The identification of residual stresses was performed using the relaxation method, which involved measuring specimen strain. The results of the measured residual stresses confirm that the stresses strongly depend on the laser surface remelting conditions. The measurement of residual stresses is very important in exacting dynamically loaded machine parts, which have been subjected to different kinds of heat treatment. In designing parts designers very frequently demand the presence of compressive residual stresses after heat treatment and finish grinding of the surface, since this increases the fatigue strength of the material and reduces the danger of fracture.
    Vir: Materials science and technology. - ISSN 0267-0836 (Vol. 17, no. 4, 2001, str. 419-424)
    Vrsta gradiva - članek, sestavni del
    Leto - 2001
    Jezik - angleški
    COBISS.SI-ID - 4332827

    Povezava(-e):

    http://www.materials.org.uk/publish/journals/mst/contents.htm

Vnos na polico