VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Elasto-hydrodynamic friction changes on steel surfaces arising from the modified surface energy of the steel due to additive boundary filmsPolajnar, Marko ...The effect of three different film-forming additives mixed in PAO oil on the elasto-hydrodynamic (EHD) friction was investigated and compared to cases with the base oil only. When the boundary films ... were formed on the surfaces, the organic friction modifier (OFM) decreased the EHL friction by up to 8.7%, the ionic liquid (IL) decreased it by up to 6.4%, while the polymeric organic friction modifier (pOFM) increased it by up to 4.2%. In contrast, if the boundary films were not formed, the EHL friction remained the same as with the base oils only. The oils` surface tension and viscosity were analysed at 25 °C and 100 °C as potential influencing effects, and the most important parameter for friction changes was found to be the surface energy. The mechanism behind this EHL friction reduction is, therefore, the effect of the boundary films on the poor oil-surface wetting and the consequent boundary slip. This study confirms the poor wetting arising from additive boundary-film formation as a relevant EHL friction-reduction mechanism. This observation is similar to that observed previously for surface coatings, thus suggesting that the boundary films of the surface-energy-reducing additives is a parameter with the potential to reduce the EHL friction.Vir: Tribology international. - ISSN 0301-679X (Vol. 164, Dec. 2021, str. 1-10)Vrsta gradiva - članek, sestavni delLeto - 2021Jezik - angleškiCOBISS.SI-ID - 73795843
Avtor
Polajnar, Marko |
Thiébaut, Benoît |
Jarnias, Frederic |
Kalin, Mitjan
Teme
elastohydrodynamic |
lubricant additive |
traction |
wetting |
elastohidrodinamika |
aditivi za maziva |
trenje |
omočljivost
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Polajnar, Marko | 33657 |
Thiébaut, Benoît | ![]() |
Jarnias, Frederic | ![]() |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: