Akademska digitalna zbirka SLovenije - logo
VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • Micromechanical models for predicting the mechanical properties of 3D-printed wood/PLA composite materials : a comparison with experimental data
    Ezzaraa, Ismail ...
    Analytic modeling of 3D printed natural fiber-reinforced composites is still in its infancy. The existing analytic works on the mechanical properties of these materials seem to be relatively few in ... spite of their practical interest. However, the mechanical properties are one of the most important parameters that define the structural behavior of the material. A micromechanical approach is used in the present study, to predict the elastic properties of 3D printed wood/PLA composites (WPC). The results of the micromechanical models were validated using the experimental data. The comparison revealed a good correlation with the Mori-Tanaka model, which the maximum deviations were lower than 20%. Moreover, a parametric study showed that the elastic properties of the composites depended strongly on the fiber content, the fiber shape, and the porosity rate.
    Vir: Mechanics of advanced materials and structures. - ISSN 1537-6494 (Vol. 29, iss. 27, 2022, str. 6765-6767)
    Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasle
    Leto - 2022
    Jezik - angleški
    COBISS.SI-ID - 81610499

    Povezava(-e):

    https://www.tandfonline.com/doi/full/10.1080/15376494.2021.1983901
    DOI

Vnos na polico