Akademska digitalna zbirka SLovenije - logo
VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
  • New approach in tool wear measuring technique using CCD vision system
    Jurkovič, Jože, 1946- ; Korošec, Marjan, strojnik, 1961- ; Kopač, Janez, 1949-
    This paper suggests a reliable direct measuring procedure for measuring different tool wear parameters. Modern image processing techniques and machine vision systems today enable direct tool wear ... measurement to be accomplished in-cycle. The presented system is characterized by its measurement flexibility, high spatial resolution and good accuracy. The systemconsists of a light source to illuminate the tool, CCD camera, laser diod (used in conjunction with profile deepness assessment) with linear projector, grabber for capturing the picture, and a PC. The technique is specially characterized by its determination of profile deepness with the helpof projected laser raster lines on a tool surface. So it has advantage comparing with other techniques, which can measure only 2D profiles. With the technique presented in this paper a 3D image of relief surface can be obtained without having need to employ a very complicated measuring system. All indirect methods like acoustic emission, force measurement, spindle current measurement, vibration sensors, etc. are very time consuming and demandvery expensive subsidiary measurement equipment, compared with the method presented here.
    Vir: International journal of machine tools & manufacture. - ISSN 0890-6955 (Letn. 45, Št. 9, 2005, str. 1023-1030)
    Vrsta gradiva - članek, sestavni del
    Leto - 2005
    Jezik - angleški
    COBISS.SI-ID - 8194843

    Povezava(-e):

    http://dx.doi.org/10.1016/j.ijmachtools.2004.11.030

    Prosto dostopno samo za člane



Vnos na polico