Fakulteta za strojništvo, Ljubljana (FSLJ)
-
Influence of filler combination and scale on tribological performance of UHMWPE composites under water lubricated condition [Elektronski vir]Gangwani, Prashant ; Emami, Nazanin ; Kalin, MitjanIn the field of polymer-composites, extensive work has been conducted on combining various fillers in the polymer matrix for improvement in tribological performance. However, notable gap exists in ... understanding whether the improvement is attributed to the type of filler material or its size, particularly in water-lubricated conditions. The study addresses this lack of understanding by simultaneously examining the impact of filler combinations and their scale on the tribological performance in polymer/steel contacts. The combination effect is evaluated by combining various micro-size fillers in Ultra-High Molecular Weight Polyethylene (UHMWPE). These fillers include of short carbon fibers, graphite, and hexagonal-boron nitride. Further, to evaluate the scale effect, one of the fillers is incorporated in combination of micro and nano sizes, while maintaining equal filler concentration in the composition for comparison. Results imply the selected fillers to work synergistically, reducing the coefficient of friction by 75 %, reaching a value of 0.06, and the specific wear rate by two orders of magnitude to 2 × 10-7 mm3/Nm, compared to pure UHMWPE. The influence of the composite scale is also noted, as the nano-compositions had 40 % lower friction in comparison to similar micro-composition. Further analysis of worn surface suggests the improvement to be related with better transfer film coverage on steel disc, a higher graphitic content in the transfer material and lack of exposed fibers on the composite surface.Vir: SLOTRIB 2024 [Elektronski vir] : Posvetovanje o tribologiji, mazivih in zelenih tehnologijah : 10. junij 2024, Portorož (Str. 1-12)Vrsta gradiva - prispevek na konferenci ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 201827587
Avtor
Gangwani, Prashant |
Emami, Nazanin |
Kalin, Mitjan
Teme
tribologija |
polimerni kompoziti |
polnila |
grafit |
borov nitrid |
tribology |
polymer composites |
UHMWPE |
fillers |
graphite |
boron nitride
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Gangwani, Prashant | 57356 |
Emami, Nazanin | |
Kalin, Mitjan | 14556 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: