Fakulteta za strojništvo, Ljubljana (FSLJ)
-
Numerical simulations in optimization of product and forming processPepelnjak, Tomaž ; Gantar, Gašper ; Kuzman, Karl, 1941-Modern systems for the development and manufacturing of new products are strongly connected to market demand. To achieve fast and effective response to market needs, the concept and design phase must ... take place in a virtual CA-x environment. Once the approximate product geometry is known, a numerical simulation has to be performed to study the forming process and appropriate tool design. After some iterations, product geometry, with some variants, is known and the best of them is chosen for further development. The number of stamping steps and the exact tooling geometry are determined. The stamping processes which are widely used in the manufacturing of sheet metal parts are hard to control, since they depend on numerous parameters relating to geometry and material type. The purpose of this paper is to present the industrial application of 3D numerical simulations using the PAM-STAMP program in the product and process development cycle. The simulations were performed during product and process development including tool design and manufacturing. The issues theoretically discussed in the first part of the paper will be explained by example. The time, costs and benefits analysis of using the numerical simulation in the product and process development cycle will also be discussed.Vir: Metalforming technology. - ISSN 1096-1526 (Vol. 30, no. 6, 2001, str. 24)Vrsta gradiva - prispevek na konferenciLeto - 2001Jezik - angleškiCOBISS.SI-ID - 4890651
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Pepelnjak, Tomaž | 12957 |
Gantar, Gašper | 15695 |
Kuzman, Karl, 1941- | 00807 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: