Fakulteta za strojništvo, Ljubljana (FSLJ)
-
Spatially selective EGR - a novel approach for heat release control in continuous combustion [Elektronski vir]Seljak, Tine, strojnik ...To support the ongoing energy transition and minimize the environmental footprint of combustion related technologies, the paper presents a novel approach for combustion control in gas turbines and ... burners. It relies on spatially targeted injection of inert components in the spray core where existent concepts fail to deliver the desired dilution rate and are unable to fully govern the spatial distribution of heat release rates. Combustion process control is thus possible by actively adjusting the composition and mass flow of spatially selective EGR, leading to an ultimate fuel-flexible concept which is capable of adjustments to heterogeneous fuels, their reactivity and physical properties. The proof of concept is demonstrated in a gas turbine combustion chamber first by investigating the isolated effects of spatially selective EGR, its comparison to external EGR and a combination of both. The results confirm the superiority of the approach as spatially selective EGR is capable of extensive reduction of NO emissions with no observable penalty on CO emissions and even further reduction of PM emissions. Furthermore, the concept proved transferrable together with all its benefits also when external EGR is introduced, where possibility for control and further reduction of NO emissions with no observed CO penalty maintains possible. Simultaneous exploitation of spatially selective, as well as external EGR, thus forms a fully controllable concept - spatially selective dilution control (SDCC), which enables extensive adjustability of dilution rates throughout the primary zone of combustion chamber. The confirmation of applicability of the novel approach and its potential to influence the local conditions is opening up a series of possible uses, as an original design feature for future fuel-flexible systems or as a retrofit approach in existent combustion systems.Vrsta gradiva - prispevek na konferenciLeto - 2021Jezik - angleškiCOBISS.SI-ID - 86042627
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Seljak, Tine, strojnik | 33516 |
Žvar Baškovič, Urban | 36402 |
Rosec, Žiga | 53507 |
Katrašnik, Tomaž | 23468 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: