FMF in IMFM, Matematična knjižnica, Ljubljana (MAKLJ)
-
Numerical prediction of efficiency and cavitation for a Pelton turbine [Elektronski vir]Jošt, Dragica ...The first part of the paper illustrates the set-up and the methodologies adopted for the numerical analysis of the flow in a 6-jet Pelton turbine with vertical axis. At first, steady state ... simulations of flow in a distributor for three positions of needle stroke were performed. The results were used for the calculation of flow energy losses, analysis of jet quality and setting inlet boundary conditions for runner analysis. Runner analysis was done only for the maximal opening. The purpose of runner analysis for the model size was efficiency prediction. Numerical results were validated with the results from the test rig. Simulations for the prototype were done in order to check whether water sheets evacuating from the buckets impact the previous bucket and whether there is any interaction between the evacuating water sheets and the incoming jets. Analysis was done also for one nozzle operation. In the second part of the paper cavitation prediction for the prototype of a 2-jet Pelton turbine is presented. The problem, because of computational cost, was reduced to five runner buckets and one jet. A multiphase flow consists of water, air and water vapour. For cavitation pitting the vapour has to stick to the buckets and mass transfer from vapour to water has to happen in a very short time without the presence of air. With detailed analysis of numerical results it was concluded that in this case no cavitation pitting is expected.Vir: 29th IAHR Symposium on Hydraulic Machinery and Systems, 17-21 September 2018, Kyoto, Japan [Elektronski vir] (062033 [10 str.])Vrsta gradiva - prispevek na konferenciLeto - 2019Jezik - angleškiCOBISS.SI-ID - 18812761
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Jošt, Dragica | 05388 |
Škerlavaj, Aljaž | 19175 |
Pirnat, Valentin | 37962 |
Morgut, Mitja | |
Nobile, Enrico |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: