Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
The application of linear elastic fracture mechanics to optimize the vacuum heat treatment and nitriding of hot-work tool steelsLeskovšek, Vojteh ; Šuštaršič, Borivoj ; Nolan, James David, metalurg, 1965-Linear elastic fracture mechanics was used to optimis(!)e the vacuum-heat-treatment procedure for conventional hot-work AISI H11 tool steel. The fracture toughness was determined with non-standard, ... circumferentially notched and fatigue-precracked tensile-test specimens. The fracture-testing method is sensitive to changes caused by variations in the microstructure due to the austenitizing and tempering temperature as well as the homogeneity of the material itself. The combined tempering diagram - Rockwell-C hardness, fracture toughness, K[sub](Ic), tempering temperature - was used to help choose the vacuum-heat-treatment parameters, aimed at obtaining the best properties for a given application with respect to the investigated steel. Nitriding treatments are established methods for improving the wear performance of tools and dies from H11 hot-work tool steel. However, the understanding of the relationship between the nitriding process parameters, on the one hand, and the microstructure and fracture behaviour of the surface layers, on the other, is far from complete. Vickers hardness indentations can generate radial fractures in brittle surface layers, and it has been shown that these cracks can be used to provide reliable information about the fracture toughness of these layers. The results suggest that for a sufficiently thick compound layer, this method has the potential to be applied as a pseudo non-destructive method of monitoring the fracture properties of treated surfaces on actual tool parts. The use of Vickers indentations for fracture toughness would give a useful insight into the fracture properties of nitride layers and their likely response to the application conditions involving high shear or impact loading. This could be very useful for investigations and quality control tool for industrial surface engineering applications.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 40, št. 5, sep.-okt. 2006, str. 179-184)Vrsta gradiva - članek, sestavni delLeto - 2006Jezik - angleškiCOBISS.SI-ID - 576682
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 40, št. 5, sep.-okt. 2006, str. 179-184)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Leskovšek, Vojteh | 07642 |
Šuštaršič, Borivoj | 08195 |
Nolan, James David, metalurg, 1965- | ![]() |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi