Landfills are the final stage in the life cycle of many products containing per- and polyfluoroalkyl substances (PFASs) and their presence has been reported in landfill leachate. The concentrations ...of 70 PFASs in 95 samples of leachate were measured in a survey of U.S. landfills of varying climates and waste ages. National release of PFASs was estimated by coupling measured concentrations for the 19 PFASs where more than 50% of samples had quantifiable concentrations, with climate-specific estimates of annual leachate volumes. For 2013, the total volume of leachate generated in the U.S. was estimated to be 61.1 million m3, with 79% of this volume coming from landfills in wet climates (>75 cm/yr precipitation) that contain 47% of U.S. solid waste. The mass of measured PFASs from U.S. landfill leachate to wastewater treatment plants was estimated to be between 563 and 638 kg for 2013. In the majority of landfill leachate samples, 5:3 fluorotelomer carboxylic acid (FTCA) was dominant and variations in concentrations with waste age affected total estimated mass. There were six PFASs that demonstrated significantly higher concentrations in leachate from younger waste compared to older waste and six PFAS demonstrated significant variation with climate.
Discarded carpet and clothing are potential sources of per- and polyfluoroalkyl substances (PFASs) in landfill leachate, but little is known about their release when disposed in landfills. The ...concentrations of 70 PFASs in the aqueous phase of anaerobic model landfill reactors filled with carpet or clothing were monitored under biologically active and abiotic conditions. For carpet, total PFAS release was greater in live than abiotic reactors, with an average of 8.5 nmol/L and 0.62 nmol/L after 552 days, respectively. Release in live carpet reactors was primarily due to 5:3 fluorotelomer carboxylic acid (FTCA – 3.9 nmol/L) and perfluorohexanoic carboxylic acid (PFHxA – 2.9 nmol/L). For clothing, release was more dependent on sample heterogeneity than the presence of biological activity, with 0.63, 21.7, 2.6, and 6.3 nmol/L for two live and two abiotic reactors after 519 days, respectively. Release in the clothing reactors was largely due to perfluorooctatonic carboxylic acid (PFOA), with low relative concentrations of measured biotransformation precursors (FTCAs). For carpet and clothing reactors, the majority of PFAS release was not measured until after day 100. Results demonstrate that carpet and clothing are likely sources of PFASs in landfill leachate.
A wide variety of consumer products that are treated with poly- and perfluoroalkyl substances (PFASs) and related formulations are disposed of in landfills. Landfill leachate has significant ...concentrations of PFASs and acts as secondary point sources to surface water. This study models how PFASs enter leachate using four laboratory-scale anaerobic bioreactors filled with municipal solid waste (MSW) and operated over 273 days. Duplicate reactors were monitored under live and abiotic conditions to evaluate influences attributable to biological activity. The biologically active reactors simulated the methanogenic conditions that develop in all landfills, producing ∼140 mL CH4/dry g refuse. The average total PFAS leaching measured in live reactors (16.7 nmol/kg dry refuse) was greater than the average for abiotic reactors (2.83 nmol/kg dry refuse), indicating biological processes were primarily responsible for leaching. The low-level leaching in the abiotic reactors was primarily due to PFCAs ≤C8 (2.48 nmol/kg dry refuse). Concentrations of known biodegradation intermediates, including methylperfluorobutane sulfonamide acetic acid and the n:2 and n:3 fluorotelomer carboxylates, increased steadily after the onset of methanogenesis, with the 5:3 fluorotelomer carboxylate becoming the single most concentrated PFAS observed in live reactors (9.53 nmol/kg dry refuse).
•We developed a fast LC-MS/MS method for measuring PFASs in landfill leachate.•Method generated little solid and solvent waste, and included 70 analytes.•Low to sub ng/L detection limits, accurate ...(81–120%) and precise (5.5–33%).•Leachate had new phosphorous-containing PFASs and short-chain Me- and EtFASAAs.•The n:3 fluorotelomer carboxylate is a concentrated new class of PFASs in leachate.
Leachates coming from landfills contain a myriad of compounds of potential environmental and human health concern, including per- and polyfluorinated alkyl substances (PFASs). Micro liquid-liquid extraction was combined with a 900μl large volume injection (LVI) for the analysis of 70 PFASs in landfill leachate by orthogonal LC-MS/MS. The LVI approach introduced 7 times more extract than conventional injection approaches. Two zirconium-modified diol guard columns effectively retained PFASs from the organic leachate extract and an analytical C18 column was used for separation. Method accuracy and precision for PFASs with analytical grade reference materials ranged from 81–120% and 5.5–33%, respectively. Estimated method detection limits in the low to sub-ng/L. Seven landfill leachates were analyzed by the optimized analytical method for the purposes of method demonstration. Leachates were characterized by a wide variety of PFASs, reporting on 36 previously-unanalyzed PFASs in leachate. Perfluoroalkyl carboxylates were the most abundant class detected while phosphorous-containing PFASs, present in all leachates, were at low concentrations. The 3-perfluoropentyl propanoate (5:3 FTCA) was the most concentrated analyte in most samples and constitutes a previously unreported but significant component of landfill leachate.
Designer benzodiazepines have recently appeared in many forensic cases as legal alternatives to federally scheduled drugs such as diazepam (Valium) and alprazolam (Xanax). Though current forensic ...instrumental techniques are often sufficient for identifying novel psychoactive substances, they may not readily differentiate between potential positional isomers. Additionally, characterization data for positional isomers of known designer benzodiazepines are widely nonexistent. In this study, flubromazepam, a recognized designer benzodiazepine since 2012, was targeted for synthesis and characterization due to its potential for federal scheduling and current legal status within the United States. A practical synthetic method was developed to prepare purified reference materials for each positional isomer of flubromazepam in which the positions of the bromine and fluorine substituents were varied. Possible isomers (9 of the 12) were successfully prepared and used for further analysis.
Environmental sample analysis by large-volume injection (LVI) in combination with liquid chromatography-tandem mass spectrometry (LCMS-MS) is the direct introduction of large sample volumes (for ...example, 900-1800 pL) into an LC system for separation and subsequent detection. ...a set of loading strategies designed to capture nonionic analytes from large volumes of organic extracts on reversed-phase columns is described and experimental components are listed.
Celotno besedilo
Dostopno za:
CEKLJ, DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
