Plastic packaging is essential nowadays. However, the huge environmental problem caused by landfill disposal of non-biodegradable polymers in the end of life has to be minimized and preferentially ...eliminated. The solution may rely on the use of biopolymers, in particular polysaccharides. These macromolecules with film-forming properties are able to produce attracting biodegradable materials, possibly applicable in food packaging. Despite all advantages of using polysaccharides obtained from different sources, some drawbacks, mostly related to their low resistance to water, mechanical performance and price, have hindered their wider use and commercialization. Nevertheless, with increasing attention and research on this field, it has been possible to trace some strategies to overcome the problems and recognize solutions. This review summarizes some of the most used polysaccharides in food packaging applications.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
A pineapple peel hydroalcoholic extract rich in phenolic compounds, was stabilized by microencapsulation using spray drying technology, with maltodextrin, inulin, and arabic gum as wall materials. ...The influence of the type of wall material and drying temperature (150 and 190 °C) on the particles properties was studied. The particles presented a spherical shape with a diameter ranging from approximately 1.3 to 18.2 µm, the exception being the ones with inulin that showed a large degree of agglomeration. All powders produced presented an intermediate cohesiveness and a fair to good flowability according to Carr index and Hausner ratio, which envisages suitable handling properties at an industrial scale. The microencapsulation processes using maltodextrin and arabic gum at 150 °C were the ones that showed higher maintenance of the antioxidant activity of compounds present in the extract before encapsulation during spray drying. In addition, the microparticles obtained were quite efficient in stabilizing the encapsulated phenolic compounds, as their antioxidant activity did not change significantly during six months of storage at 5 °C.
•FucoPol/chitosan bilayer films were prepared for application in food packaging.•Bilayer films showed good optical and mechanical properties.•Bilayer films are poor barriers to water vapour but ...excellent barriers to gases.•Bilayers presented enhanced properties comparing to FucoPol monolayer films.
Bilayer films of FucoPol and chitosan were prepared and characterized in terms of optical, morphologic, hygroscopic, mechanical and barrier properties, to evaluate their potential application in food packaging. Bilayer films have shown dense and homogeneous layers, and presented enhanced properties when comparing to monolayer FucoPol films. Though, a high swelling degree in contact with liquid water (263.3%) and a high water vapour permeability (0.75×10−11mol/msPa), typical of polysaccharide films, was still observed. However, they presented a low permeability to O2 and CO2 (0.47×10−16molm/m2sPa and 5.8×10−16molm/m2sPa, respectively). Tensile tests revealed a flexible and resistant film with an elongation at break of 38% and an elastic modulus of 137MPa. The studied properties, in particular the excellent barrier to gases, impart these bilayer films potential to be used in packaging of low moisture content products, as well as in multilayered hydrophobic/hydrophilic/hydrophobic barriers for food products with a broader range of water content.
68Ga-based radiopharmaceuticals are routinely used for PET imaging of multiple types of tumors. Gallium-68 is commonly obtained from 68Ge/68Ga generators, which are limited in the quantity of ...activity produced. Alternatively, gallium-68 can easily be produced on a cyclotron using liquid targets. In this study, we optimized the GMP production of 68GaGaFAPI-46 using gallium-68 produced via a standard medical cyclotron using liquid targets. Starting from the published synthesis and quality control procedures described for other 68Ga-based radiopharmaceuticals, we have validated the synthesis process and the analytical methods to test the quality parameters of the final product to be used for routine clinical studies. 68GaGaFAPI-46 was successfully produced with high radiochemical purity and yield using an IBA Synthera® Extension module. Gallium chloride was produced on a medical cyclotron using a liquid target with activity of 4.31 ± 0.36 GBq at the end of purification (EOP). Analytical methods were established and validated, meeting Ph. Eur. standards. Full GMP production was also validated in three consecutive batches, producing 2.50 ± 0.46 GBq of 68GaGaFAPI-46 at the end of synthesis (EOS), with 98.94 ± 0.72% radiochemical purity measured via radio-HPLC. Quality was maintained for up to 3 h after the EOS. Production of 68GaGaFAPI-46 was performed and validated using a standard medical cyclotron with liquid targets. The quality control parameters (e.g., sterility, purity, and residual solvents) conformed to Ph. Eur. and a shelf life of 3 h was established. The activity of 68GaGaFAPI-46 produced was substantially higher than the one obtained with generators, enabling a better response to the clinical need for this radiopharmaceutical.
Spent coffee grounds (SCG) oil was obtained by supercritical carbon dioxide (scCO2) extraction in a pilot plant apparatus, with an oil extraction yield of 90% at a 35kgkg(-1) CO2/SCG ratio. ...Cupriavidus necator DSM 428 was cultivated in 2L bioreactor using extracted SCG oil as sole carbon source for production of polyhydroxyalkanoates. The culture reached a cell dry weight of 16.7gL(-1) with a polymer content of 78.4% (w/w). The volumetric polymer productivity and oil yield were 4.7gL(-1)day(-1) and 0.77gg(-1), respectively. The polymer produced was a homopolymer of 3-hydroxybutyrate with an average molecular weight of 2.34×10(5) and a polydispersity index of 1.2. The polymer exhibited brittle behaviour, with very low elongation at break (1.3%), tensile strength at break of 16MPa and Young's Modulus of 1.0GPa. Results show that SCG can be a bioresource for polyhydroxyalkanoates production with interesting properties.
Biodegradable and bioactive films were prepared using gelatin from nutraceutical capsules wastes and natural antioxidants present in papaya peel. These films are intended to be an alternative to ...synthetic polyethylene packages in food preservation. Papaya peel was incorporated in the gelatin matrix as macroparticulate powder and in the form of microparticles, in different concentrations (2.5, 5, and 7.5%). The papaya peel powder microparticles were produced by spray drying with gelatin as wall material. The results indicated that microparticles of papaya peel powder originated a more continuous film matrix increasing the tensile strength and Young’s modulus. Films with 5 and 7.5% papaya peel macroparticulate powder showed the highest antioxidant activity with values of 0.94 and 1.44 μmol Trolox equivalents (TE)/g dried film, respectively, when compared to films with microparticles (0.63 and 0.84 μmol TE/g dried film). When applied as packaging material for lard, the films with microparticles (7.5%) were the most efficient as active barriers (higher antioxidant activity), as a lower content of peroxides (3.47 mEq/kg) quantified after 22 days. The addition of natural antioxidants through papaya peel microparticles is a promising strategy for the development of environmentally friendly packaging of food products with high-fat content and susceptible to oxidation.
Pseudomonas chlororaphis subsp. aurantiaca DSM 19603 was cultivated on apple pulp, a glucose- and fructose-rich waste generated during juice production, to produce medium-chain length ...polyhydroxyalkanoates. A cell dry mass of 8.74 ± 0.20 g/L, with a polymer content of 49.25 ± 4.08% were attained. The produced biopolymer was composed of 42.7 ± 0.1 mol% 3-hydroxydecanoate, 17.9 ± 1.0 mol% 3-hydroxyoctanoate, 14.5 ± 1.1 mol% 3-hydroxybutyrate, 11.1 ± 0.6 mol% 3-hydroxytetradecanoate, 10.1 ± 0.5 mol% 3-hydroxydodecanoate and 3.7 ± 0.2 mol% 3-hydroxyhexanoate. It presented low glass transition and melting temperatures (−40.9 ± 0.7 °C and 42.0 ± 0.1 °C, respectively), and a degradation temperature of 300.0 ± 0.1 °C, coupled to a low crystallinity index (12.7 ± 2.7%), a molecular weight (Mw) of 1.34 × 105 ± 0.18 × 105 Da and a polydispersity index of 2.70 ± 0.03. The biopolymer's films were dense and had a smooth surface, as demonstrated by Scanning Electron Microscopy. They presented a tension at break of 5.21 ± 1.09 MPa, together with an elongation of 400.5 ± 55.8% and an associated Young modulus of 4.86 ± 1.49 MPa, under tensile tests. These attractive filming properties of this biopolymer could potentially be valorised in several areas such as the fine chemicals industry, biomedicine, pharmaceuticals, or food packaging.
Marine environments comprise almost three quarters of Earth's surface, representing the largest ecosystem of our planet. The vast ecological and metabolic diversity found in marine microorganisms ...suggest that these marine resources have a huge potential as sources of novel commercially appealing biomolecules, such as exopolysaccharides (EPS). Six
strains from different marine environments in French Polynesia atolls were selected for EPS extraction. All the EPS were heteropolysaccharides composed of different monomers, including neutral monosaccharides (glucose, galactose, and mannose, rhamnose and fucose), and uronic acids (glucuronic acid and galacturonic acid), which accounted for up to 45.5 mol% of the EPS compositions. Non-carbohydrate substituents, such as acetyl (0.5-2.1 wt%), pyruvyl (0.2-4.9 wt%), succinyl (1-1.8 wt%), and sulfate (1.98-3.43 wt%); and few peptides (1.72-6.77 wt%) were also detected. Thermal analysis demonstrated that the EPS had a degradation temperature above 260 °C, and high char yields (32-53%). Studies on EPS functional properties revealed that they produce viscous aqueous solutions with a shear thinning behavior and could form strong gels in two distinct ways: by the addition of Fe
, or in the presence of Mg
, Cu
, or Ca
under alkaline conditions. Thus, these EPS could be versatile materials for different applications.
Pseudomonas chlororaphis subsp. aurantiaca (DSM 19603) was grown on crude glycerol from biodiesel production to produce a medium-chain-length polyhydroxyalkanoate (mcl-PHA), composed of ...3-hydroxydodecanoate (43 ± 1.8 mol%), 3-hydroxydecanoate (29 ± 3.1 mol%), 3-hydroxytetradecanoate (12 ± 0.4 mol%), 3-hydroxyoctanoate (10 ± 1.5 mol%) and 3-hydroxyhexanoate (6 ± 0.3 mol%). The biopolymer had an average molecular weight of 1.1 × 105 Da, with a polydispersity index of 1.5, and was semi-crystalline, as shown by its crystallinity index of 37 ± 0.2%. It had low melting (44 °C) and glass transition (−48 °C) temperatures, and was thermally stable up to 285 °C. The biopolymer films were elastic and translucid, were hydrophobic and presented relatively high permeability to oxygen and carbon dioxide. The films demonstrated to have good adhesion properties towards porcine skin and human skin. The tension (61.1 ± 20.6 kPa) and shear (12.7 ± 2.14 kPa) bond strength of the mcl-PHA for porcine skin suggest its potential as a biomaterial for the development of novel natural adhesives for wound closure or wound dressings.
PDF
