The EDELWEISS Collaboration has performed a search for dark matter particles with masses below the GeV scale with a 33.4-g germanium cryogenic detector operated in a surface lab. The energy deposits ...were measured using a neutron-transmutation-doped Ge thermal sensor with a 17.7 eV (rms) baseline heat energy resolution leading to a 60 eV analysis energy threshold. Despite a moderate lead shielding and the high-background environment, the first sub-GeV spin-independent dark matter limit based on a germanium target has been achieved. The experiment provides the most stringent, nuclear-recoil-based, above-ground limit on spin-independent interactions above 600 MeV/c2. The experiment also provides the most stringent limits on spin-dependent interactions with protons and neutrons below 1.3 GeV/c2. Furthermore, the dark matter search results were studied in the context of strongly interacting massive particles, taking into account Earth-shielding effects, for which new regions of the available parameter space have been excluded. Finally, the dark matter search has also been extended to interactions via the Migdal effect, resulting for the first time in the exclusion of particles with masses between 45 and 150 MeV/c2 with spin-independent cross sections ranging from 10−29 to 10−26 cm2.
We make use of the EDELWEISS-III array of germanium bolometers to search for electron interactions at the keV scale induced by phenomena beyond the Standard Model. A 90% C.L. lower limit is set on ...the electron lifetime decaying to invisibles, ?>1.2×1024 years. We investigate the emission of axions or axionlike particles (ALPs) by the Sun, constraining the coupling parameters gae<1.1×10?11 and gae×gaNeff<3.5×10?17 at 90% C.L. in the massless limit. We also directly search for the absorption of bosonic dark matter particles that would constitute our local galactic halo. Limits are placed on the couplings of ALPs or hidden photon dark matter in the mass range 0.8–500 keV/c2. Prospects for searching for dark matter particles with masses down to 150 eV/c2 using improved detectors are presented.
We present the first Ge-based constraints on sub-MeV /c2 dark matter (DM) particles interacting with electrons using a 33.4 g Ge cryogenic detector with a 0.53 electron-hole pair (rms) resolution, ...operated underground at the Laboratoire Souterrain de Modane. Competitive constraints are set on the DM-electron scattering cross section, as well as on the kinetic mixing parameter of dark photons down to 1 eV / c2. In particular, the most stringent limits are set for dark photon DM in the 6 to 9 eV / c2 range. These results demonstrate the high relevance of Ge cryogenic detectors for the search of DM-induced eV-scale electron signals.
We review the physics potential of a next generation search for solar axions: the International Axion Observatory (IAXO) . Endowed with a sensitivity to discover axion-like particles (ALPs) with a ...coupling to photons as small as gaγ∼10−12 GeV−1, or to electrons gae∼10−13, IAXO has the potential to find the QCD axion in the 1 meV∼1 eV mass range where it solves the strong CP problem, can account for the cold dark matter of the Universe and be responsible for the anomalous cooling observed in a number of stellar systems. At the same time, IAXO will have enough sensitivity to detect lower mass axions invoked to explain: 1) the origin of the anomalous “transparency” of the Universe to gamma-rays, 2) the observed soft X-ray excess from galaxy clusters or 3) some inflationary models. In addition, we review string theory axions with parameters accessible by IAXO and discuss their potential role in cosmology as Dark Matter and Dark Radiation as well as their connections to the above mentioned conundrums.
CUPID-Mo is a bolometric experiment to search for neutrinoless double-beta decay (
0
ν
β
β
) of
100
Mo
. In this article, we detail the CUPID-Mo detector concept, assembly and installation in the ...Modane underground laboratory, providing results from the first datasets. The CUPID-Mo detector consists of an array of 20
100
Mo
-enriched 0.2 kg
Li
2
MoO
4
crystals operated as scintillating bolometers at
∼
20
mK
. The
Li
2
MoO
4
crystals are complemented by 20 thin Ge optical bolometers to reject
α
events by the simultaneous detection of heat and scintillation light. We observe a good detector uniformity and an excellent energy resolution of 5.3 keV (6.5 keV) FWHM at 2615 keV, in calibration (physics) data. Light collection ensures the rejection of
α
particles at a level much higher than 99.9% – with equally high acceptance for
γ
/
β
events – in the region of interest for
100
Mo
0
ν
β
β
. We present limits on the crystals’ radiopurity:
≤
3
μ
Bq/kg
of
226
Ra
and
≤
2
μ
Bq/kg
of
232
Th
. We discuss the science reach of CUPID-Mo, which can set the most stringent half-life limit on the
100
Mo
0
ν
β
β
decay in half-a-year’s livetime. The achieved results show that CUPID-Mo is a successful demonstrator of the technology developed by the LUMINEU project and subsequently selected for the CUPID experiment, a proposed follow-up of CUORE, the currently running first tonne-scale bolometric
0
ν
β
β
experiment.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Abstract
A key component of the Dark Energy Spectroscopic Instrument (DESI) survey validation (SV) is a detailed visual inspection (VI) of the optical spectroscopic data to quantify key survey ...metrics. In this paper we present results from VI of the quasar survey using deep coadded SV spectra. We show that the majority (≈70%) of the main-survey targets are spectroscopically confirmed as quasars, with ≈16% galaxies, ≈6% stars, and ≈8% low-quality spectra lacking reliable features. A nonnegligible fraction of the quasars are misidentified by the standard spectroscopic pipeline, but we show that the majority can be recovered using post-pipeline “afterburner” quasar-identification approaches. We combine these “afterburners” with our standard pipeline to create a modified pipeline to increase the overall quasar yield. At the depth of the main DESI survey, both pipelines achieve a good-redshift purity (reliable redshifts measured within 3000 km s
−1
) of ≈99%; however, the modified pipeline recovers ≈94% of the visually inspected quasars, as compared to ≈86% from the standard pipeline. We demonstrate that both pipelines achieve a median redshift precision and accuracy of ≈100 km s
−1
and ≈70 km s
−1
, respectively. We constructed composite spectra to investigate why some quasars are missed by the standard pipeline and find that they are more host-galaxy dominated (i.e., distant analogs of “Seyfert galaxies”) and/or more dust reddened than the standard-pipeline quasars. We also show example spectra to demonstrate the overall diversity of the DESI quasar sample and provide strong-lensing candidates where two targets contribute to a single spectrum.
Abstract
The Dark Energy Spectroscopic Instrument (DESI) Survey has obtained a set of spectroscopic measurements of galaxies to validate the final survey design and target selections. To assist in ...these tasks, we visually inspect DESI spectra of approximately 2500 bright galaxies, 3500 luminous red galaxies (LRGs), and 10,000 emission-line galaxies (ELGs) to obtain robust redshift identifications. We then utilize the visually inspected redshift information to characterize the performance of the DESI operation. Based on the visual inspection (VI) catalogs, our results show that the final survey design yields samples of bright galaxies, LRGs, and ELGs with purity greater than 99%. Moreover, we demonstrate that the precision of the redshift measurements is approximately 10 km s
−1
for bright galaxies and ELGs and approximately 40 km s
−1
for LRGs. The average redshift accuracy is within 10 km s
−1
for the three types of galaxies. The VI process also helps improve the quality of the DESI data by identifying spurious spectral features introduced by the pipeline. Finally, we show examples of unexpected real astronomical objects, such as Ly
α
emitters and strong lensing candidates, identified by VI. These results demonstrate the importance and utility of visually inspecting data from incoming and upcoming surveys, especially during their early operation phases.
The International Axion Observatory (IAXO) will be a forth generation axion helioscope. As its primary physics goal, IAXO will look for axions or axion-like particles (ALPs) originating in the Sun ...via the Primakoff conversion of the solar plasma photons. In terms of signal-to-noise ratio, IAXO will be about 4-5 orders of magnitude more sensitive than CAST, currently the most powerful axion helioscope, reaching sensitivity to axion-photon couplings down to a few x10 super(-12) GeV super(-1) and thus probing a large fraction of the currently unexplored axion and ALP parameter space. IAXO will also be sensitive to solar axions produced by mechanisms mediated by the axion-electron coupling g sub(ae) with sensitivity - for the first time - to values of g sub(ae) not previously excluded by astrophysics. With several other possible physics cases, IAXO has the potential to serve as a multi-purpose facility for generic axion and ALP research in the next decade. In this paper we present the conceptual design of IAXO, which follows the layout of an enhanced axion helioscope, based on a purpose-built 20 m-long 8-coils toroidal superconducting magnet. All the eight 60cm-diameter magnet bores are equipped with focusing x-ray optics, able to focus the signal photons into ~ 0.2 cm super(2) spots that are imaged by ultra-low-background Micromegas x-ray detectors. The magnet is built into a structure with elevation and azimuth drives that will allow for solar tracking for ~12 h each day.
Abstract
Millions of quasar spectra will be collected by the Dark Energy Spectroscopic Instrument (DESI), leading to a fourfold increase in the number of known quasars. High-accuracy quasar ...classification is essential to tighten constraints on cosmological parameters measured at the highest redshifts DESI observes (
z
> 2.0). We present spectral templates for identification and redshift estimation of quasars in the DESI Year 1 data release. The quasar templates are comprised of two quasar eigenspectra sets, trained on spectra from the Sloan Digital Sky Survey. The sets are specialized to reconstruct quasar spectral variation observed over separate yet overlapping redshift ranges and, together, are capable of identifying DESI quasars from 0.05 <
z
< 7.0. The new quasar templates show significant improvement over the previous DESI quasar templates regarding catastrophic failure rates, redshift precision and accuracy, quasar completeness, and the contamination fraction in the final quasar sample.
The Lyman-α (hereafter Lyα) forest is a probe of large-scale matter density fluctuations at high redshift, z>2.1. It consists of H I absorption spectra along individual lines-of-sight. If the ...line-of-sight density is large enough, 3D maps of H I absorption can be inferred by tomographic reconstruction. In this article, we investigate the Lyα forest available in the Stripe 82 field (220deg2), based on the quasar spectra from SDSS Data Release DR16. The density of observed quasar spectra is 37deg−2 with a mean pixel signal-to-noise ratio of two per angstrom. This study provides an intermediate case between the average SDSS density and that of the much denser but smaller CLAMATO survey. We derive a 3D map of large-scale matter fluctuations from these data, using a Wiener filter technique. The total volume of the map is 0.94h−3Gpc3. Its resolution is 13h−1Mpc, which is related to the mean transverse distance between nearest lines-of-sight. From this map, we provide a catalog of voids and protocluster candidates in the cosmic web. The map-making and void catalog are compared to simulated eBOSS Stripe 82 observations. A stack over quasar positions provides a visualization of the Lyα forest-quasar cross-correlation. This tomographic reconstruction constitutes the largest-volume high-redshift 3D map of matter fluctuations.