Terbinafine is a new powerful antifungal agent indicated for both oral and topical treatment of myco- sessince. It is highly effective in the treatment of determatomycoses. The chemical and ...pharmaceutical analysis of the drug requires effective analytical methods for quality control and pharmacodynamic and pharmacokinetic studies. Ever since it was introduced as an effective antifungal agent, many methods have been developed and validated for its assay in pharmaceuticals and biological materials. This article reviews the various methods reported during the last 25 years.
Background
Metformin hydrochloride (MFH) is a biguanide class anti-diabetic drug used to treat type-2 diabetes mellitus. Its reaction with two charge-transfer complexing agents,
p
-chloranilic acid ...(PCA) and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) in acetonitrile medium to yield coloured products measurable at wavelengths of maxima 530.0 and 460.0 nm, respectively, was conveniently used to develop two spectrophotometric methods for analyses of bulk sample and tablets.
Results
The effect of solvent, reagent concentration and reaction time to form charge-transfer (CT) complexes was meticulously studied and optimized. Under optimised conditions, the absorbance at the respective wavelength of maximum versus concentration of MFH was in linear correlation for the range from 8.0 to 320.0 and from 1.6 to 64.0 μg mL
-1
in PCA and DDQ methods, respectively, and correspondingly, the values of molar absorptivity of 0.733 × 10
3
and 0.257 × 10
4
L mol
-1
cm
-1
and Sandell sensitivity of 0.3620 and 0.0644 μg cm
-2
. The quantification (QL) and detection (DL) limits were 2.67 and 0.88 μg mL
-1
for PCA method, and 0.33 and 0.11 μg mL
-1
for DDQ method.
Conclusion
The new methods were emerged as repeatable and reproducible, with replicate measurements for intra- and inter-day variations as showed by obtained RSD values of < 2%. Within a day and between day relative errors were ≤ 2.18%. Methods were also validated for robustness, ruggedness and selectivity and agreeing results were produced. The methods were used to analyse MFH-containing tablets very accurately and precisely as reflected by the mean recovery value close to 100% and lower RSD values, respectively. Analysis of spiked human urine yielded excellent mean recoveries, indicating the absence of interference from endogenous substances.
Three simple methods are described for the determination of amoxicillin (AMX) in bulk drug and dosage forms using iodate-iodide mixture reagent. These methods employed the well-known analytical ...reaction between iodate-iodide mixture in the presence of acid solution. The iodide oxidized by iodate to iodine in an amount equivalent to the -COOH group present in amoxicillin (AMX) and the liberated iodine determined by titrimetry and spectrophotometry. In the titrimetric method (method A), the liberated iodine was reacted with a measured excess of thiosulphate and the residual thiosulphate was determined by titration with a standard iodine solution using starch indicator, the method was applicable over 2 - 16 mg of AMX. In the second and third methods, the absorbance of the liberated iodine was measured at 370 nm (method B) and also iodine was reacted with starch and starch-iodine complex was measured at 570 nm (method C). In spectrophotometric methods (B and C), Beer’s law was obeyed over the concentration range of 5 - 50 and 5 - 60 µg mL-1 AMX with a molar absorptivity values of 5.55×103 L mol-1 cm-1 and 4.76×103 L mol-1 cm-1 for the method A and method B, respectively. The limits of detection (LOD) and quantification (LOQ) were calculated for method B and method C. The proposed methods were found to yield reliable results when applied to bulk drug and dosage forms analysis, and hence they can be applied in quality control laboratories.
Background
Lisinopril (LNP) is an angiotensin-converting enzyme inhibitor used as anti-hypertensive, cardiovascular, in anti-prophylactic and anti-diabetic nephropathy drug. Development of two new, ...simple, low cost, and selective membrane-based ion-selective electrodes has been proposed for the determination of LNP in pharmaceuticals.
Methods
The electrodes are based on poly(vinyl)chloride membrane doped with LNP-phosphotungstic acid (LNP-PTA) and LNP-phosphomolybdic acid (LNP-PMA) ion-pairs as molecular recognition materials.
Results
The developed LNP-PTA and LNP-PMA electrodes are applicable for the determination of LNP over the linear range of 5 × 10
−5
–2.4 × 10
−3
mol l
−1
. The working pH ranges to measure potentials were 2.5 to 6.4 and 2.3 to 6.0 for LNP-PTA and LNP-PMA ISEs, respectively. The electrodes displayed the rapid Nernstian responses as revealed by the values of slopes 55.06 and 52.39 mV/decade, with limit of detection (LOD) values of 1.2 × 10
−5
and 1.18 × 10
−5
mol l
−1
for LNP-PTA and LNP-PMA electrodes, respectively. The limits of quantitation (LOQ) values have also been calculated for both the electrodes. The developed electrodes have potential stability for up to 1 month and emerged as highly selective for the determination of LNP over other spiked ions and compounds.
Conclusions
The proposed electrodes have been validated and found that they are suitable for the determination of LNP in pharmaceuticals in pure form and in dosage forms. The results obtained in the analysis of LNP using proposed electrodes have been compared statistically with reference method’s results to assess the accuracy and precision. Robustness and ruggedness of the developed electrodes have also been checked and found satisfactory. The recovery studies have been performed by standard addition procedure to assess the role of excipients in tablets containing LNP and the results obtained are satisfactory.
A simple, sensitive and selective extractive spectrophotometric method for the determination of quetiapine fumarate (QTF) in bulk drug, tablets and spiked human urine sample is described. The method ...is based on the formation of a chloroform extractable yellow ion-pair complex between basic nitrogen of the drug (QTF) and the dye quinoline yellow (QY) in acetate-hydrochloride buffer (pH 2.56) medium. The formed ion-pair complex exhibited an absorption maximum at 420 nm. Beer's law is obeyed over the concentration range 2.5-25 µg mL.sup.-1 with an apparent molar absorptivity value of 2.02 x 10.sup.4 L mol.sup.-1 cm.sup.-1. The Sandell sensitivity, limits of detection (LOD) and quantification values are also reported. The composition of the ion-pair was established by Job's continuous variations method and it was found to be 1:1 (QTF:QY). The proposed method was successfully applied for the determination of QTF in bulk drug, tablets and spiked human urine without any interference. (doi: 10.5562/cca1770) Keywords: quetiapine fumarate, determination, spectrophotometry, quinoline yellow, pharmaceuticals
Four simple, precise and sensitive visible spectrophotometric methods were developed for the determination of solifenacin succinate in pure and pharmaceutical dosage forms. The proposed methods were ...based on the estimation of unreacted N-bromosuccinimide (
NBS
) with four dyes, namely, amaranth, safranin, aniline blue and rhodamine B, by the drug oxidation by known excess of NBS at laboratory temperature. Beer-Lambert’s law revealed good correlation in the concentration ranges of 10–70, 20–80, 30–80, and 10–50 µg/mL for methods A, B, C and D, respectively. The developed methods were successfully applied to the determination of solifenacin succinate in commercially available dosage forms. Statistical comparison of the results showed insignificant difference between the proposed methods and reference method. The proposed methods offered the advantages of simplicity and economy that can be applied without the need for expensive instrumentation and reagents in quality control analysis.
Two simple, selective and sensitive spectrophotometric methods were developed and validated for the determination of valganciclovir hydrochloride (VLGH) in pure drug and tablets. The first method was ...based on the reduction of iron(III) to iron(II) by VLGH and subsequent formation of iron(III)-ferricyanide complex (Prussian blue) in acid medium which was measured at 730 nm (method A). In the second method (method B), permanganate was reduced by VLGH to bluish green manganate in alkaline medium and the absorbance was measured at 610 nm. The absorbance measured in each case was related to VLGH concentration. The experimental conditions were carefully studied and optimized. Beer’s law was obeyed over the concentration ranges of 2.5-20.0 and 2.0-40.0 µg mL-1 for method A and method B, respectively, with corresponding molar absorptivity values of 1.28×104 and 6.88×103 L mol-1 cm-1. The limits of detection (LOD) and quantification (LOQ) were 0.11 and 0.33 µg mL-1 (method A) and 0.21 and 0.64 µg mL-1 (method B). Within-day and between-day relative standard deviations (%RSD) at three different concentrations levels were < 2.4%, and the respective relative errors (%RE) were ≤ 3%. The proposed methods were successfully applied to the determination of VLGH in tablets, and the results confirmed that the proposed methods were equally precise and accurate as the official method.
Two simple, rapid and inexpensive spectrophotometric methods are described for the determination of diethylcarbamazine citrate (DEC) in bulk drug and formulations. The methods are based on the ...charge–transfer (CT) complexation reaction involving DEC as the n- donor and 2,3-dichloro-5,6-dicyano- p -benzoquinone DDQ (method A) and 2,4-dinitro phenol DNP (method B) as π-acceptors in chloroform. The absorbance of CT complexes was measured at 480 nm for method A, and 420 nm for method B. Under optimum conditions, Beer’s law was obeyed over the concentration ranges 4-90 and 4-100 μg mL-1 for methods A and B, respectively.
Two simple, rapid and inexpensive spectrophotometric methods are described for the determination of albendazole (ALB) in bulk drug and in tablets. The methods are based on charge-transfer (CT) ...complexation reaction involving ALB as n-donor and iodine as σ-acceptor (method A) in dichloromethane or picric acid (PA) as π-acceptor (method B) in chloroform. The absorbance of CT complexes was measured at 380 nm for method A, and 415 nm for method B. The optimization of the experimental conditions is described. Under optimum conditions, Beer's law obeyed over the concentration ranges 8.0-240 and 2.4-42 μg mL-1 for method A and method B, respectively. The apparent molar absorptivity of CT complexes at the respective λmax are calculated to be 1.17×103 and 5.22×103 L mol-1cm-1 respectively, and the corresponding Sandell sensitivity values are 0.2273 and 0.0509 ng cm-2. The limits of detection (LOD) and quantification (LOQ) are calculated to be (0.69 and 2.08), and (0.10 and 0.30) μg mL-1 with method A, and method B, respectively. The intra-day and inter-day accuracy expressed as % RE and precision expressed as % RSD were less than 3%. The methods were applied to the determination of ALB in tablets.
Dois métodos espectrofotométricos, simples, rápidos e de baixo custo são descritos para a determinação do albendazol (ALB) como fármaco e em comprimidos. Os métodos baseiam-se em reação de complexação de transferência de carga (TC) envolvendo ALB como n-doador e iodo como aceptor de σ (método A) em diclorometano ou ácido pícrico como π-aceptor (método B), em clorofórmio. A absorção de complexos TC foi medida em 380 nm para o método A e 415 nm para o método B. A otimização das condições experimentais é descrita. Sob condições ideais, a lei de Beer é obedecida nas concentrações entre 8,0 e 240 e 2,4 e 42 μg mL-1 para os métodos A e B, respectivamente. A absortividade molar aparente dos complexos de TC no respectivo λ max foi calculada como sendo 1,17×103 e 5,22×103 L mol-1 cm-1, respectivamente, e os valores de sensibilidade de Sandell correspondentes são 0,2273 e 0,0509 ng cm-2. Os limites de detecção (LOD) e quantificação (LOQ) calculados são (0,69 e 2,08) e (0,10 e 0,30) μg mL-1, com o método A e o método B, respectivamente. A exatidão intra-dia e inter-dia, expressa como % de erro relativo e precisão expressa como % DPR foi inferior a 3%. Os métodos foram aplicados para a determinação de ALB em comprimidos.
Pioglitazone hydrochloride (PGH) is an oral anti-hyperglycemic agent used in the treatment of type-2 diabetes mellitus. Potassium permanganate was found to oxidize PGH both in acidic and basic ...conditions, based on which two simple and sensitive methods were developed for its determination in bulk sample and tablets, and validated. In the first method (indirect method), PGH was reacted with a measured excess of standard permanganate in H2SO4 medium, and the residual oxidant was determined by measuring its absorbance at 550 nm. The second method (Direct method) entails treating PGH with permanganate in NaOH medium, followed by the measurement of the resulting bluish-green manganite at 610 nm. Experimental variables affecting the reactions were studied and optimized. Under optimum conditions, linear relationships with good correlation coefficients were found between absorbance and concentration in the ranges, 1.25 – 25 µg mL-1 (Indirect method) and 1-12 µg mL-1 (Direct method) with respective molar absorptivity values of 1.10 × 104 and 2.77 × 104 l mol-1 cm-1. The limits of detection (LOD) and quantification (LOQ) were 0.36 and 1.08 (Indirect method) and 0.23 and 0.69 µg mL-1 (Direct method). Intra-day and inter-day precisions were satisfactory, with %RSD values of ≤2.11, and the respective accuracies were excellent with %RE values of ≤2. The methods were also validated for robustness, ruggedness and selectivity. The methods were applied to the determination of PGH in its tablets with good accuracy and precision, and no interference from the tablet additives was encountered. The results were also compared with those obtained by a reference method.
PDF
