Off-line emittance measurements of the SPES ion source at LNL Montano, J.; Vasquez, J.; Andrighetto, A. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2011, Letnik:
648, Številka:
1
Journal Article
Recenzirano
In the framework of the SPES Radioactive Beam Facility of INFN, a dedicated Ion Source R&D program has recently been started at the Legnaro Laboratory. The main goal is to study and improve its ...quality. The measurements of transverse phase space distributions of the ions produced in the target complex are of great importance for every ISOL based facility like for example SPES. In particular the phase space distribution becomes essential for the determination of simulation parameters and hence for the mass separation, the injection into traps and breeders, calculation of transport losses, etc. For these reasons a new beam emittance analyzer device, developed at the Legnaro laboratories, has recently been coupled with an off-line target front-end. The experimental measurements on the SPES surface ion source, using three different stable ion beams (Rb, Cs, Al), and their analysis, are presented here.
The SPES Radioactive Ion Beam (RIB) facility at INFN-LNL is in the construction phase. It is based on the ISOL method with an UCx Direct Target able to sustain a power of 10 kW. The primary proton ...beam is delivered by a high current Cyclotron accelerator, with energy 35-70 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions will be produced by proton induced Uranium fission in the UCx target at an expected fission rate in the order of 10 super(13) fissions per second. The exotic isotopes will be re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV and higher, for masses in the region A=130 amu at expected rate on the secondary target of 10 super(7) - 10 super(9) pps. The SPES project has the aim to provide high intensity and high-quality beams of neutron-rich nuclei as well as to develop an interdisciplinary research center based on the cyclotron proton beam.
A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target ...able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 40 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced fission at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 – 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research center for radio-isotopes production for medicine and for neutron beams.
A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target ...able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced fission on an Uranium target at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 - 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research centre for radio-isotopes production for medicine and for neutron beams.
The SPES (Selective Production of Exotic Species) project for a national exotic beam facility in Legnaro includes pivotal upgrades of the existing superconducting linac ALPI (Aceeleratore Lineare Per ...Ioni), to make it appropriate as the RIB (Radioactive Ion Beam) accelerator. The new injector, consisting of an Electron Cyclotron Resonance (ECR)-type charge breeder and a radiofrequency quadrupole (RFQ), will be described. Upgrade measures in ALPI to improve beam transmission and final energy, and handle low-intensity RIB will be explained, with the aim of increasing transmission to T > 90%, E sub(f) by 20%, reaching 10 MeV/u for the reference beam super(132)Sn.
A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target ...able to sustain a power of 8 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.2-0.7 mA. Neutron-rich radioactive ions are produced by proton induced fission on an Uranium target at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 - 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research centre for radio-isotopes production for medicine and for neutron beams.
The SPES radioactive ion beam project of INFN de Angelis, Giacomo; Prete, G; Andrighetto, A ...
Journal of physics. Conference series,
01/2014, Letnik:
527, Številka:
1
Journal Article
Recenzirano
Odprti dostop
The SPES Radioactive Ion Beam facility at INFN-LNL is presently in the construction phase. The facility is based on the Isol (Isotope separation on-line) method with an UCx Direct Target able to ...sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.20.5 mA. Neutron-rich radioactive ions are produced by proton induced Uranium fission at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting Linac at energies of 10A MeV for masses in the region A 130 amu. The expected secondary beam rates are of the order of 107 – 109 pps. Aim of the SPES project is to provide a facility for high intensity radioactive ion beams for nuclear physics research as well as to develop an interdisciplinary research center based on the cyclotron proton beam.
The aim of the SPES (Selective Production of Exotic Species) project is to provide high intensity and high-quality beams of neutron-rich nuclei to perform forefront research in nuclear structure, ...reaction dynamics and interdisciplinary fields like medical, biological and material sciences. SPES is a second generation ISOL radioactive ion beam facility, part of the INFN Road Map for the Nuclear Physics and supported by the italian national laboratories LNL (Legnaro) and LNS (Catania). It represents an intermediate step toward the future generation European ISOL facility EURISOL. It is based on the ISOL method with an UCx Direct Target able to sustain a power of 10 kW. The primary proton beam will be delivered by a Cyclotron accelerator with an energy of more then 40 MeV and a beam current of 200 μA. Neutron-rich radioactive ions will be produced by Uranium fission at an expected fission rate in the target of the order of 1013 fissions per second. The exotic isotopes will be re-accelerated by the ALPI superconducting LINAC up to energies of 10-13 AMeV, for masses in the region of A=130 amu, with an expected rate on the secondary target of 108 pps.
The SPES Radioactive Ion Beam facility at INFN-LNL is presently in the construction phase. The facility is based on the Isol (Isotope separation on-line) method with an UCx Direct Target able to ...sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 35-70 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced Uranium fission at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting Linac at energies of 10A MeV for masses in the region A = 130 amu. The expected secondary beam rates are of the order of 107 - 109 pps. Aim of the SPES project is to provide a facility for high intensity radioactive ion beams for nuclear physics research as well as to develop an interdisciplinary research center based on the cyclotron proton beam.
At INFN-Legnaro the heavy ion injector PIAVE, based on two superconducting RFQ and eight quarter wave resonators (QWR), is at an advanced stage of beam commissioning. The RFQs (SRFQ1 and SRFQ2), ...built in full Nb within a stiffening Ti jacket, are 0.8
m in diameter and 1.4 and 0.8
m long respectively, with a resonant frequency of 80
MHz. The PIAVE beam is bunched by a normal conducting 3-harmonic buncher upstream the SRFQs. The SRFQs are specified to work at a peak surface field of 25.5
MV/m, a value which was exceeded in the test phase and has been recently confirmed in on-line tests. Phase and amplitude locking, versus both microphonics and pressure variations of the liquid helium bath, is the main issue. Since November 2004, the two SRFQs have been used quite extensively, for beam acceleration tests in PIAVE, showing a high degree of reliability. A
16O
3+ pilot beam, received from an ECR ion source located on a high voltage platform, was used in the tests. The typical ion beam current was a few hundreds nA, even though it could be raised up to a few μA without any inconveniences. Beam tests with
132Xe
18+ were made too. The paper reports the more recent results of on-line SRFQ tests and beam operation.
PDF
