The excellent particle identification (PID) system is needed for the successful execution of the broad experimental program at future Super C-τ Factory (SCTF) in Novosibirsk. The main requirements ...for the PID system are the following: good π/K-separation in whole operational momentum range and good μ/π-separation in the momentum range from 0.4 up to 1.2 GeV/c. The RICH detector based on focusing aerogel (FARICH) could provide good π/K-separation from 0.4 GeV/c and μ/π-separation in the momentum range from 0.4 up to 1.5 GeV/c. The method FARICH is described, beam test results are presented and the status of multilayer aerogel production is given.
The Super Charm-Tau Factory is an electron-positron collider project in Novosibirsk with a peak luminosity of 1035cm−1s−1 operating in the center of mass energy range between 2 and 6 GeV. The physics ...program of the experiment in general is devoted to the study of charm quark and tau lepton. Conceptual designs of the collider and a universal detector are presented. The dedicated particle identification (PID) system is required to provide the state-of-the-art level of μ/π separation for the particle momenta up to 1.2GeV/c. The following options for the PID system are considered in this paper: Focusing Aerogel RICH (FARICH) detector composed of 4-layer aerogel tiles, threshold Cherenkov counters based on aerogel and shifter (ASHIPH), Focusing DIRC (FDIRC) counter and time-of-flight (ToF) detector combined with the time-of-propagation (ToP) approach providing a time resolution better than 30ps. Also the capabilities of particles separation in tracking system are discussed. Comparison of PID approaches with help of parametric simulation is performed.
Beam test of FARICH prototype with digital photon counter Barnyakov, A.Yu; Barnyakov, M.Yu; Bobrovnikov, V.S. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2013, Letnik:
732
Journal Article
Recenzirano
In June 2012 we tested a Focusing Aerogel RICH detector prototype based on Digital Photon Counters (DPC) by Philips at the CERN PS T10 beam line with a particle momentum up to 6GeV/c. The prototype ...comprises a 20×20cm2 photon detector with 48×48 DPC pixels. In order to reduce the dark count rate, the photon detector was cooled to −40°C in addition to disabling individual DPC's microcells. A four layer focusing aerogel radiator with 200mm focal distance was studied. We obtained a Cherenkov angle resolution of 3.61±0.04mrad. The mean number of photoelectrons in a ring is 12. Directly measured π/K separation at 6GeV/c momentum is 3.5σ, μ/π separation is 5.3σ at 1GeV/c. A comparison with a Monte Carlo simulation is presented as well.
•Focusing Aerogel RICH prototype with Digital Photon Counters by Philips was built.•The prototype was tested at the CERN PS T10 beam line.•We observed Cherenkov rings with 12 photoelectrons in average.•Timing resolution of DPCs is 48ps for single photons.•Cherenkov angle resolution is 3.64±0.04mrad per ring.
Particle identification system based on Focusing Aerogel RICH (FARICH) detector is considered as an option for the future experiments at the Super Charm-Tau Factory (Russia). We present the progress ...of FARICH R&D at the Budker Institute of Nuclear Physics. New samples of focusing 4-layer aerogels with maximal refractive index 1.065 were produced in 2020–2021. First beam test results with relativistic electrons demonstrate single photon resolution (SPR) of 9÷10mrad. According to simulation results, the aerogels with such SPR are able to provide μ/π-separation at the level of more than 3 standard deviations for tracks with momentum 1.5 GeV/c. The first version of electronics to readout SiPM arrays based on TDC implemented on FPGA (FPGA-TDC) was developed and manufactured.
The electronic width of the
J
/
ψ
meson and its product by the branching fractions of
J
/
ψ
meson decay to hadrons and electrons measured with the KEDR detector at the VEPP-4M
e
+
e
−
collider have ...been reported in ref. 1.
Aerogel for FARICH detector Barnyakov, A.Yu; Barnyakov, M.Yu; Bobrovnikov, V.S. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2014, Letnik:
766
Journal Article
Recenzirano
We present our current experience in preparation of focusing aerogels for the Focusing Aerogel RICH detector. Multilayer focusing aerogel tiles have been produced in Novosibirsk by a collaboration of ...the Budker Institute of Nuclear Physics and Boreskov Institute of Catalysis since 2004. We have obtained 2-3-4-layer blocks with the thickness of 30-45 mm. In 2012, the first samples of focusing blocks with continuous density (refractive index) gradient along thickness were produced. This technology can significantly reduce the contribution from the geometric factor of the radiator thickness to the resolution of the measured Cherenkov angle in the FARICH detector. The special installation was used for automatic control of reagents ratio during the synthesis process. The first samples were tested using the digital radiography method and on the electron beam with the FARICH prototype.
Measurement of Γee(J/ψ) with KEDR detector Anashin, V. V; Aulchenko, V. M; Baldin, E. M ...
The journal of high energy physics,
05/2018, Letnik:
2018, Številka:
5
Journal Article
Recenzirano
Odprti dostop
A
bstract
The product of the electronic width of the
J/ψ
meson and the branching fractions of its decay to hadrons and electrons has been measured using the KEDR detector at the VEPP-4M
e
+
e
−
...collider. The obtained values are
Γ
e
e
J
/
ψ
=
5.550
±
0.056
±
0.089
keV
,
Γ
e
e
J
/
ψ
·
ℬ
hadrons
J
/
ψ
=
4.884
±
0.048
±
0.078
keV
,
Γ
e
e
J
/
ψ
·
ℬ
e
e
J
/
ψ
=
0.3331
±
0.0066
±
0.0040
keV
.
The uncertainties shown are statistical and systematic, respectively. Using the result presented and the world-average value of the electronic branching fraction, one obtains the total width of the
J/ψ
meson:
Γ
=
92.94
±
1.83
keV
.
These results are consistent with the previous experiments.
A method of measurement of the energy of electrons extracted from the VEPP-4M accelerator is described. The method was verified experimentally. The results obtained are in good agreement with ...simulation. The energy resolution is 1.8% for electron energy of 1000 MeV and improves to 0.7% for electron energy of 3500 MeV.
Particle identification system based on dense aerogel Barnyakov, A.Yu; Barnyakov, M.Yu; Beloborodov, K.I. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2013, Letnik:
732
Journal Article
Recenzirano
A threshold Cherenkov counter based on dense aerogel with refraction index n=1.13 is described. This counter is used for kaon identification at momenta below 1GeV/c in the SND detector, which takes ...data at the VEPP-2000 e+e− collider. The results of measurements of the counter efficiency using electrons, muons, pions, and kaons produced in e+e− annihilation are presented.
The Super Charm–Tau (SCT) Factory is a proposed electron–positron collider in Novosibirsk with a peak luminosity of 1035cm−1s−1 operating in the energy range between 2and 6 GeV. The interaction ...region should be equipped by an excellent universal particle detector meeting the requirements of broad physics program of the experiment. Research and development for all detector subsystems is currently underway. Particle identification (PID) system of the detector is required to provide the state-of-the-art level of μ/π separation for the particle momenta up to 1.2GeV∕c. The following options for the PID system are considered in this paper: focusing aerogel ring imaging Cherenkov (FARICH) detector composed of 4-layer aerogel tiles, threshold Cherenkov counters based on aerogel shifter photomultiplier (ASHIPH), and time-of-flight (ToF) detector combined with the time-of-propagation (ToP) approach providing a time resolution better than 30ps. Assessment of the charged particle separation performance for these options based on simulation and prototype tests results is presented.
PDF
