The hue or H component of the hue, saturation, value (HSV) color space has been studied as a quantitative analytical parameter for bitonal optical sensors. The robust nature of this parameter ...provides superior precision for the measurement of sensors which change colors with the speciation of some indicator molecule. This parameter has been compared to red, green, blue (RGB) intensity and RGB absorbance along with differences and ratios of both intensity and absorbance and has been demonstrated to be 2 to 3 times superior. The H value maintains this superior precision with variations in indicator concentration, membrane thickness, detector spectral responsivity, and illumination. Because this parameter is stable, simple to calculate, easily obtained from commercial devices such as scanners and digital cameras, continuous over the entire color gamut, and bound between values of 0 and 1, it shows great promise for use in a variety of sensing applications including imaging, automated analysis, pharmaceutical sensing, lab-on-a-chip devices, and quality control applications.
Smart facemask for wireless CO2 monitoring Escobedo, P.; Fernández-Ramos, M. D.; López-Ruiz, N. ...
Nature communications,
01/2022, Letnik:
13, Številka:
1
Journal Article
Recenzirano
Odprti dostop
Abstract
The use of facemasks by the general population is recommended worldwide to prevent the spread of SARS-CoV-2. Despite the evidence in favour of facemasks to reduce community transmission, ...there is also agreement on the potential adverse effects of their prolonged usage, mainly caused by CO
2
rebreathing. Herein we report the development of a sensing platform for gaseous CO
2
real-time determination inside FFP2 facemasks. The system consists of an opto-chemical sensor combined with a flexible, battery-less, near-field-enabled tag with resolution and limit of detection of 103 and 140 ppm respectively, and sensor lifetime of 8 h, which is comparable with recommended FFP2 facemask usage times. We include a custom smartphone application for wireless powering, data processing, alert management, results displaying and sharing. Through performance tests during daily activity and exercise monitoring, we demonstrate its utility for non-invasive, wearable health assessment and its potential applicability for preclinical research and diagnostics.
We report the modeling, and geometrical and electrical characterization, of inkjet and screen-printed patterns on different polymeric substrates for use as antennas in radio-frequency identification ...(RFID) applications. We compared the physical and electrical characteristics of two silver nanoparticle-based commercial inkjet-printable inks and one screen-printable silver paste, when deposited on polyimide (PI), polyethylene terephthalate (PET), and polyetherimide (PEI) substrates. First, the thickness of the inkjet-printed patterns was predicted by use of an analytical model based on printing conditions and ink composition. The predicted thickness was confirmed experimentally, and geometrical characterization of the lines was completed by measuring the root-mean-square roughness of the patterns. Second, direct-current electrical characterization was performed to identify the printing conditions yielding the lowest resistivity and sheet resistance. The minimum resistivity for the inkjet-printing method was 8.6 ± 0.8 μΩ cm, obtained by printing four stacked layers of one of the commercial inks on PEI, whereas minimum resistivity of 44 ± 7 μΩ cm and 39 ± 4 μΩ cm were obtained for a single layer of screen-printed ink on polyimide (PI) with 140 threads/cm mesh and 90 threads/cm mesh, respectively. In every case, these minimum values of resistivity were obtained for the largest tested thickness. Coplanar waveguide transmission lines were then designed and characterized to analyze the radio-frequency (RF) performance of the printed patterns; minimum transmission losses of 0.0022 ± 0.0012 dB/mm and 0.0016 ± 0.0012 dB/mm measured at 13.56 MHz, in the high-frequency (HF) band, were achieved by inkjet printing on PEI and screen printing on PI, respectively. At 868 MHz, in the ultra-high-frequency band, the minimum values of transmission loss were 0.0130 ± 0.0014 dB/mm for inkjet printing on PEI and 0.0100 ± 0.0014 dB/mm for screen printing on PI. Although the resistivity achieved is lower for inkjet printing than for screen printing, RF losses for inkjetted patterns were larger than for screen-printed patterns, because thicker layers were obtained by screen printing. Finally, several coil inductors for the HF band were also fabricated by use of both printing techniques, and were used as antennas for semi-passive smart RFID tags on plastic foil capable of measuring temperature and humidity.
This work reports on the development of a 3D microfluidic paper-based device (3D mu PAD) for glucose detection using organic-inorganic hybrid nanoflower technology to immobilize the bi-enzymatic ...system (glucose oxidase and horseradish peroxidase). The system is based on nanoflowerssupported on cellulose paper (the microreactor zone) coupled to 3,3',5,5'-tetramethylbenzidine (TMB) as the colorimetric probe in the detection zone. We used a digital camera for the quantitative analysis of glucose with the S coordinate of the HSV color space as the analytical parameter. Under optimal operational conditions, linearity was observed for glucose concentrations up to 300 mu M, with a detection limit of 15.6 mu M. The biosensor is reusable and remains stable for 75 days in conventional storage conditions.
One of the main limiting factors in optical sensing arrays is the reproducibility in the preparation, typically by spin coating and drop casting techniques, which produce membranes that are not fully ...homogeneous. In this paper, we increase the discriminatory power of colorimetric arrays by increasing the reproducibility in the preparation by inkjet printing and measuring the color from the image of the array acquired by a digital camera, using the H coordinate of the HSV color space as the analytical parameter, which produces robust and precise measurements. A disposable 31 mm × 19 mm nylon membrane with 35 sensing areas with 7 commercial chromogenic reagents makes it possible to identify 13 metal ions and to determine mixtures with up to 5 ions using a two-stage neural network approach with higher accuracy than with previous approaches.
This work presents a new optical microfluidic paper biosensor for the detection of organophosphate pesticides and carbamate pesticides. The assay strip is composed of a paper support (1 × 17.6 mm) ...onto which acetylcholine esterase (AChE) and acetylcholine chloride (AChCl) are deposited, in such a way that there is a small hole between them that ensures that they only come into contact in the reaction zone when they are carried by a solution of the sample by lateral flow to the reaction zone containing bromocresol purple (BCP) as the pH indicator, immobilized by sol-gel. The sensor operates at room temperature and the rate of the inhibited reaction serves as an analytical signal, which is measured using a camera by quantifying the appropriate colour coordinate. Calibration curves were obtained for chlorpyrifos and carbaryl, with a useful concentration range from 0.24 to 20 μg L−1 for carbaryl and from 2.00 to 45 μg L−1 for chlorpyrifos. The detection limits were 0.24 and 2.00 μg L−1, respectively, and with reproducibility around 4.2–5.5%. The method was applied to the determination of pesticides in different water samples, with no sample preparation.
Display omitted
•Easy-to-use, simple and fast colorimetric μPAD to determine pesticides in water.•A μPAD with a double channel design permits to include all reagents needed.•The inhibition of substrate hydrolysis is transduced by a pH indicator immobilized in sol-gel.
Display omitted
► An inexpensive photographic camera with flash as analytical system is presented. ► The procedure is tested with disposable multianalyte optical sensors and pH strips. ► Analytical ...performance and comparison with other imaging techniques are discussed.
The primary interest of this study concerns the use of an inexpensive photographic digital camera as the detection system, using its own flash as the source of light to present a new analytical procedure to measure disposable multianalyte optical sensors for potassium, magnesium, hardness and conventional pH test strips. The camera arrangement was designed in a fixed position over an optical board with controllable ambient conditions. After acquiring the digital image, the analytical information contained in each test zone is analyzed using theRGB colour space. Reflectance measurements were developed to study the colourimetric and spectral characteristics of the test zones. We obtained the following application ranges and precision in terms of relative standard deviation (RSD %): for potassium from 3.2
×
10
−7 to 0.1
M with a precision between 3.3 and 4.0%, for magnesium from 2.7
×
10
−6 to 1.5
M showing a precision between 4.7 and 7.8% and finally for hardness from 4.3
×
10
−2 to 200,000
mg
L
−1 CaCO
3 and between 5.1 and 7.0%. Moreover, the analytical characteristics of several optical procedures were compared with the results presented here. The proposed method was statistically validated against a reference procedure using samples of water from different sources and beverages, indicating that there are no significant statistical differences at a 95% confidence level.
In this work, a radiofrequency identification (RFID) tag with an optical indicator for the measurement of gaseous oxygen is described. It consists of an O2 sensing membrane of PtOEP together with a ...full electronic system for RFID communication, all printed on a flexible substrate. The membrane is excited by an LED at 385 nm wavelength and the intensity of the luminescence generated is registered by means of a digital color detector. The output data corresponding to the red coordinate of the RGB color space is directly related to the concentration of O2, and it is sent to a microcontroller. The RFID tag is designed and implemented by screen printing on a flexible substrate for the wireless transmission of the measurement to a remote reader. It can operate in both active and passive mode, obtaining the power supply from the electromagnetic waves of the RFID reader or from a small battery, respectively. This system has been fully characterized and calibrated including temperature drifts, showing a high-resolution performance that allows measurement of very low values of oxygen content. Therefore this system is perfectly suitable for its use in modified atmosphere packaging where the oxygen concentration is reduced below 2%. As the reading of the O2 concentration inside the envelope is carried out with an external RFID reader using wireless communication, there is no need for perforations for probes or wires, so the packaging remains completely closed. With the presented device, a limit of detection of 40 ppm and a resolution as low as 0.1 ppm of O2 can be reached with a low power consumption of 3.55 mA.
An electrochemiluminescence-based disposable biosensor for lactate is characterized. The lactate recognition system is based on lactate oxidase (LOx) and the transduction system consists of luminol. ...All the needed reagents, luminol, LOx, BSA, electrolyte and buffer have been immobilized by a Methocel membrane placed on the working electrode of the screen-printed electrochemical cell. The measurement of the electrochemiluminescence (ECL) is made possible via a photocounting head when 50 microl of sample is placed into the screen-printed cell with a circular container containing the disposable sensing membrane. The compositions of the membrane and reaction conditions have been optimized to obtain adequate sensitivity. The disposable biosensor responds to lactate after 20 s when two 1 s pulses at 0.5 V are applied to obtain the analytical parameter, the ECL initial rate. The linearized double logarithmic dependence for lactate shows a dynamic range from 10(-5) to 5 x 10(-4) M with a detection limit of 5 x 10(-6) M and a sensor-to-sensor repeatability, as relative standard deviation, RSD, of 3.30% at the medium level of the range. The ECL disposable biosensor was applied to the analysis of lactate in human saliva as an alternative procedure for obtaining the lactate level in a non-invasive way. Interferences coming from components of saliva were studied and eliminated in a simple way that was easy to handle. The procedure was validated for use in human saliva, comparing the results against an enzymatic reference procedure. The proposed method is quick, inexpensive, selective and sensitive and uses conventional ECL instrumentation.
Formaldehyde is a common contaminant in occupational and environmental atmospheres, prolonged exposure leads to health risks, and its determination is necessary to protect health. There is a great ...demand for portable, rapid, and sensitive methods that can be used in resource-limited settings. In this respect, a colorimetric sensor has been developed based on the colour change from pink to purple of co-immobilized chromotropic acid and 4-aminoazobenzene in hydroxypropyl methylcellulose when it is exposed to different concentrations of formaldehyde. The concentration of formaldehyde in the gas phase was quantified by measuring the change of the appropriate colour coordinates in response to the concentration of formaldehyde. A calibration curve was obtained for formaldehyde, with a useful concentration range from 0.08 to 0.6 ppmv. The detection limit was 0.016 ppmv, which is lower than the maximum exposure concentrations recommended by both the World Health Organization (WHO) and the Occupational Safety and Health Administration (OSHA). The optical sensor was found to have good reproducibility, with a relative standard deviation of 2.3 and 1.7% at 0.08 and 0.25 ppmv, respectively. The sensor can operate at room temperature and environmental humidity, 25 °C, and 50% RH, respectively. In addition, a study of interferents (acetaldehyde, toluene, methanol, ethyl acetate, acetone, acetic acid, carbon dioxide and ammonia) showed high selectivity for formaldehyde, which indicates that this membrane is a simple, fast, and economical alternative for quantifying the concentration of formaldehyde in different environments.
Optical sensor for highly selective determination of Formaldehyde gas at room temperature. Irreversible sensor with a detection limit lower than the maximum exposure concentrations recommended by both the WHO and OSHA. Good reproducibility and with only a 5-min response time.
PDF
