Plants provide fundamental support systems for life on Earth and are the basis for all terrestrial ecosystems; a decline in plant diversity will be detrimental to all other groups of organisms ...including humans. Decline in plant diversity has been hard to quantify, due to the huge numbers of known and yet to be discovered species and the lack of an adequate baseline assessment of extinction risk against which to track changes. The biodiversity of many remote parts of the world remains poorly known, and the rate of new assessments of extinction risk for individual plant species approximates the rate at which new plant species are described. Thus the question 'How threatened are plants?' is still very difficult to answer accurately. While completing assessments for each species of plant remains a distant prospect, by assessing a randomly selected sample of species the Sampled Red List Index for Plants gives, for the first time, an accurate view of how threatened plants are across the world. It represents the first key phase of ongoing efforts to monitor the status of the world's plants. More than 20% of plant species assessed are threatened with extinction, and the habitat with the most threatened species is overwhelmingly tropical rain forest, where the greatest threat to plants is anthropogenic habitat conversion, for arable and livestock agriculture, and harvesting of natural resources. Gymnosperms (e.g. conifers and cycads) are the most threatened group, while a third of plant species included in this study have yet to receive an assessment or are so poorly known that we cannot yet ascertain whether they are threatened or not. This study provides a baseline assessment from which trends in the status of plant biodiversity can be measured and periodically reassessed.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Compact multi-spectral sensors that can be mounted on lightweight drones are now widely available and applied within the geo- and environmental sciences. However; the spatial consistency and ...radiometric quality of data from such sensors is relatively poorly explored beyond the lab; in operational settings and against other sensors. This study explores the extent to which accurate hemispherical-conical reflectance factors (HCRF) and vegetation indices (specifically: normalised difference vegetation index (NDVI) and chlorophyll red-edge index (CHL)) can be derived from a low-cost multispectral drone-mounted sensor (Parrot Sequoia). The drone datasets were assessed using reference panels and a high quality 1 m resolution reference dataset collected near-simultaneously by an airborne imaging spectrometer (HyPlant). Relative errors relating to the radiometric calibration to HCRF values were in the 4 to 15% range whereas deviations assessed for a maize field case study were larger (5 to 28%). Drone-derived vegetation indices showed relatively good agreement for NDVI with both HyPlant and Sentinel 2 products (R2 = 0.91). The HCRF; NDVI and CHL products from the Sequoia showed bias for high and low reflective surfaces. The spatial consistency of the products was high with minimal view angle effects in visible bands. In summary; compact multi-spectral sensors such as the Parrot Sequoia show good potential for use in index-based vegetation monitoring studies across scales but care must be taken when assuming derived HCRF to represent the true optical properties of the imaged surface.
•A unique set of multi-angular observations of solar-induced fluorescence (F) and PRI.•F and PRI anisotropy characterized in contrasting canopy structures.•67 % increase in sun-induced fluorescence ...apparent yield (Fy*) acquired off-nadir.•The highest anisotropy index (ANIX) of F was observed in erectophile canopy.•We foster using nadir-looking geometry for F and PRI measurements.
The increasing amount of continuous time series of solar-induced fluorescence (SIF) and vegetation indices (e.g. Photochemical Reflectance Index, PRI) acquired with high temporal (sub-minute) frequencies is foreseen to allow tracking of the structural and physiological changes of vegetation in a variety of ecosystems. Coupled with observations of CO2, water, and energy fluxes from eddy covariance flux towers, these measurements can bring new insights into the remote monitoring of ecosystem functioning. However, continuously changing solar-view geometry imposes directional effects on diurnal cycles of the fluorescence radiance in the observation direction (F) and PRI, controlled by structural and biochemical vegetation properties. An improved understanding of these variations can potentially help to disentangle directional responses of vegetation from physiological ones in the continuous long-term optical measurements and, therefore, allow to deconvolve the physiological information relevant to ecosystem functioning. Moreover, this will also be useful for better interpreting and validating F and PRI satellite products (e.g., from the upcoming ESA FLEX mission).
Many previous studies focused on the characterization of reflectance directionality, but only a handful of studies investigated directional effects on F and vegetation indices related to plant physiology. The aim of this study is to contribute to the understanding of red (F687) and far-red (F760) fluorescence and PRI anisotropy based on field spectroscopy data and simulations with the Soil-Canopy Observation of Photochemistry and Energy fluxes (SCOPE) model. We present an extensive dataset of multi-angular measurements of F and PRI collected at canopy level with a high-resolution instrument (FloX, JB Hyperspectral Devices UG, Germany) over different ecosystems: Mediterranean grassland, alfalfa, chickpea and rice.
We found, that F760 and F687 directional responses of horizontally homogeneous canopies are characterized by higher values in the backscatter direction with a maximum in the hotspot and lower values in the forward scatter direction. The PRI exhibited similar response due to its sensitivity to sunlit-shaded canopy fractions.
As confirmed by radiative transfer forward simulations, we show that in the field measurements leaf inclination distribution function controls the shape of F and PRI anisotropic response (bowl-like/dome-like shapes), while leaf area index and the ratio of leaf width to canopy height affect the magnitude and the width of the hotspot. Finally, we discuss the implications of off-nadir viewing geometry for continuous ground measurements. F observations under oblique viewing angles showed up to 67 % difference compared to nadir observations, therefore, we suggest maintaining nadir viewing geometry for continuous measurements of F and vegetation indices. Alternatively, a correction scheme should be developed and tested against multi-angular measurements to properly account for anisotropy of canopy F and PRI observations. The quantitative characterization of these effects in varying illumination geometries for different canopies that was performed in this study will also be useful for the validation of remote sensing F and PRI products at different spatial and temporal scales.
The upcoming Fluorescence Explorer (FLEX) mission will provide sun-induced fluorescence (SIF) products at unprecedented spatial resolution. Thus, accurate calibration and validation (cal/val) of ...these products are key to guarantee robust SIF estimates for the assessment and quantification of photosynthetic processes. In this study, we address one specific component of the uncertainty budget related to SIF retrieval: the spatial representativeness of in situ SIF observations compared to medium-resolution SIF products (e.g., 300 m pixel size). Here, we propose an approach to evaluate an optimal sampling strategy to characterise the spatial representativeness of in situ SIF observations based on high-spatial-resolution SIF data. This approach was applied for demonstration purposes to two agricultural areas that have been extensively characterized with a HyPlant airborne imaging spectrometer in recent years. First, we determined the spatial representativeness of an increasing number of sampling points with respect to a reference area (either monocultural crop fields or hypothetical FLEX pixels characterised by different land cover types). Then, we compared different sampling approaches to determine which strategy provided the most representative reference data for a given area. Results show that between 3 and 13.5 sampling points are needed to characterise the average SIF value of both monocultural fields and hypothetical FLEX pixels of the agricultural areas considered in this study. The number of sampling points tends to increase with the standard deviation of SIF of the reference area, as well as with the number of land cover classes in a FLEX pixel, even if the increase is not always statistically significant. This study contributes to guiding cal/val activities for the upcoming FLEX mission, providing useful insights for the selection of the validation site network and particularly for the definition of the best sampling scheme for each site.
The interest of the scientific community on the remote observation of sun‐induced chlorophyll fluorescence (SIF) has increased in the recent years. In this context, hyperspectral ground measurements ...play a crucial role in the calibration and validation of future satellite missions. For this reason, the European cooperation in science and technology (COST) Action ES1309 OPTIMISE has compiled three papers on instrument characterization, measurement setups and protocols, and retrieval methods (current paper). This study is divided in two sections; first, we evaluated the uncertainties in SIF retrieval methods (e.g., Fraunhofer line depth (FLD) approaches and spectral fitting method (SFM)) for a combination of off-the-shelf commercial spectrometers. Secondly, we evaluated how an erroneous implementation of the retrieval methods increases the uncertainty in the estimated SIF values. Results show that the SFM approach applied to high-resolution spectra provided the most reliable SIF retrieval with a relative error (RE) ≤6% and <5% for F687 and F760, respectively. Furthermore, although the SFM was the least affected by an inaccurate definition of the absorption spectral window (RE = 5%) and/or interpolation strategy (RE = 15%–30%), we observed a sensitivity of the SIF retrieval for the simulated training data underlying the SFM model implementation.
Retrieval of Sun-Induced Chlorophyll Fluorescence (F) spectrum is one of the challenging perspectives for further advancing F studies towards a better characterization of vegetation structure and ...functioning. In this study, a simplified Spectral Fitting retrieval algorithm suitable for retrieving the F spectrum with a limited number of parameters is proposed (two parameters for F). The novel algorithm is developed and tested on a set of radiative transfer simulations obtained by coupling SCOPE and MODTRAN5 codes, considering different chlorophyll content, leaf area index and noise levels to produce a large variability in fluorescence and reflectance spectra. The retrieval accuracy is quantified based on several metrics derived from the F spectrum (i.e., red and far-red peaks, O2 bands and spectrally-integrated values). Further, the algorithm is employed to process experimental field spectroscopy measurements collected over different crops during a long-lasting field campaign. The reliability of the retrieval algorithm on experimental measurements is evaluated by cross-comparison with F values computed by an independent retrieval method (i.e., SFM at O2 bands). For the first time, the evolution of the F spectrum along the entire growing season for a forage crop is analyzed and three diverse F spectra are identified at different growing stages. The results show that red F is larger for young canopy; while red and far-red F have similar intensity in an intermediate stage; finally, far-red F is significantly larger for the rest of the season.
Sun-induced canopy chlorophyll fluorescence in both the red (FR) and far-red (FFR) regions was estimated across a range of temporal scales and a range of species from different plant functional types ...using high resolution radiance spectra collected on the ground. Field measurements were collected with a state-of-the-art spectrometer setup and standardized methodology. Results showed that different plant species were characterized by different fluorescence magnitude. In general, the highest fluorescence emissions were measured in crops followed by broadleaf and then needleleaf species. Red fluorescence values were generally lower than those measured in the far-red region due to the reabsorption of FR by photosynthetic pigments within the canopy layers. Canopy chlorophyll fluorescence was related to plant photosynthetic capacity, but also varied according to leaf and canopy characteristics, such as leaf chlorophyll concentration and Leaf Area Index (LAI). Results gathered from field measurements were compared to radiative transfer model simulations with the Soil-Canopy Observation of Photochemistry and Energy fluxes (SCOPE) model. Overall, simulation results confirmed a major contribution of leaf chlorophyll concentration and LAI to the fluorescence signal. However, some discrepancies between simulated and experimental data were found in broadleaf species. These discrepancies may be explained by uncertainties in individual species LAI estimation in mixed forests or by the effect of other model parameters and/or model representation errors. This is the first study showing sun-induced fluorescence experimental data on the variations in the two emission regions and providing quantitative information about the absolute magnitude of fluorescence emission from a range of vegetation types.
Chlorophyll fluorescence (ChlF) information offers a deep insight into the plant physiological status by reason of the close relationship it has with the photosynthetic activity. The unmanned aerial ...systems (UAS)-based assessment of solar induced ChlF (SIF) using non-imaging spectrometers and radiance-based retrieval methods, has the potential to provide spatio-temporal photosynthetic performance information at field scale. The objective of this manuscript is to report the main advances in the development of UAS-based methods for SIF retrieval with non-imaging spectrometers through the latest scientific contributions, some of which are being developed within the frame of the Training on Remote Sensing for Ecosystem Modelling (TRuStEE) program. Investigations from the Universities of Edinburgh (School of Geosciences) and Tasmania (School of Technology, Environments and Design) are first presented, both sharing the principle of the spectroradiometer optical path bifurcation throughout, the so called ‘Piccolo-Doppio’ and ‘AirSIF’ systems, respectively. Furthermore, JB Hyperspectral Devices’ ongoing investigations towards the closest possible characterization of the atmospheric interference suffered by orbital platforms are outlined. The latest approach focuses on the observation of one single ground point across a multiple-kilometer atmosphere vertical column using the high altitude UAS named as AirFloX, mounted on a specifically designed and manufactured fixed wing platform: ‘FloXPlane’. We present technical details and preliminary results obtained from each instrument, a summary of their main characteristics, and finally the remaining challenges and open research questions are addressed. On the basis of the presented findings, the consensus is that SIF can be retrieved from low altitude spectroscopy. However, the UAS-based methods for SIF retrieval still present uncertainties associated with the current sensor characteristics and the spatio-temporal mismatching between aerial and ground measurements, which complicate robust validations. Complementary studies regarding the standardization of calibration methods and the characterization of spectroradiometers and data processing workflows are also required. Moreover, other open research questions such as those related to the implementation of atmospheric correction, bidirectional reflectance distribution function (BRDF) correction, and accurate surface elevation models remain to be addressed.
Une évolution de la Composante Spatiale de Copernicus (CSC) est prévue pendant la seconde moitié des années 2020 pour répondre aux besoins prioritaires des utilisateurs non couverts par ...l'infrastructure existante. La mission CHIME (Copernicus Hyperspectral Imaging Mission for the Environment) couvrira une partie de ces besoins en fournissant des mesures hyperspectrales pour des domaines applicatifs comme la sécurité alimentaire, l'agriculture et la gestion de matières premières. Cet article fournit une description de la mission CHIME et de son état de développement actuel.
Current and upcoming Sun-Induced chlorophyll Fluorescence (SIF) satellite products (e.g., GOME, TROPOMI, OCO, FLEX) have medium-to-coarse spatial resolutions (i.e., 0.3–80 km) and integrate radiances ...from different sources into a single ground surface unit (i.e., pixel). However, intrapixel heterogeneity, i.e., different soil and vegetation fractional cover and/or different chlorophyll content or vegetation structure in a fluorescence pixel, increases the challenge in retrieving and quantifying SIF. High spatial resolution Sentinel-2 (S2) data (20 m) can be used to better characterize the intrapixel heterogeneity of SIF and potentially extend the application of satellite-derived SIF to heterogeneous areas. In the context of the COST Action Optical synergies for spatiotemporal SENsing of Scalable ECOphysiological traits (SENSECO), in which this study was conducted, we proposed direct (i.e., spatial heterogeneity coefficient, standard deviation, normalized entropy, ensemble decision trees) and patch mosaic (i.e., local Moran’s I) approaches to characterize the spatial heterogeneity of SIF collected at 760 and 687 nm (SIF760 and SIF687, respectively) and to correlate it with the spatial heterogeneity of selected S2 derivatives. We used HyPlant airborne imagery acquired over an agricultural area in Braccagni (Italy) to emulate S2-like top-of-the-canopy reflectance and SIF imagery at different spatial resolutions (i.e., 300, 20, and 5 m). The ensemble decision trees method characterized FLEX intrapixel heterogeneity best (R2 > 0.9 for all predictors with respect to SIF760 and SIF687). Nevertheless, the standard deviation and spatial heterogeneity coefficient using k-means clustering scene classification also provided acceptable results. In particular, the near-infrared reflectance of terrestrial vegetation (NIRv) index accounted for most of the spatial heterogeneity of SIF760 in all applied methods (R2 = 0.76 with the standard deviation method; R2 = 0.63 with the spatial heterogeneity coefficient method using a scene classification map with 15 classes). The models developed for SIF687 did not perform as well as those for SIF760, possibly due to the uncertainties in fluorescence retrieval at 687 nm and the low signal-to-noise ratio in the red spectral region. Our study shows the potential of the proposed methods to be implemented as part of the FLEX ground segment processing chain to quantify the intrapixel heterogeneity of a FLEX pixel and/or as a quality flag to determine the reliability of the retrieved fluorescence.