Abstract
The CALICE collaboration is developing highly granular
electromagnetic and hadronic calorimeters for detectors at future
energy frontier electron-positron colliders. After successful tests
...of a physics prototype, a technological prototype of the Analog
Hadron Calorimeter has been built, based on a design and
construction techniques scalable to a collider detector. The
prototype consists of a steel absorber structure and active layers
of small scintillator tiles that are individually read out by
directly coupled SiPMs. Each layer has an active area of
72 × 72 cm^2 and a tile size of
3 × 3 cm^2. With 38 active layers, the prototype
has nearly 22,000 readout channels, and its total thickness
amounts to 4.4 nuclear interaction lengths. The dedicated readout
electronics provide time stamping of each hit with an expected
resolution of about 1 ns. The prototype was constructed in
2017 and commissioned in beam tests at DESY. It recorded muons,
hadron showers and electron showers at different energies in test
beams at CERN in 2018. In this paper, the design of the prototype,
its construction and commissioning are described. The methods used
to calibrate the detector are detailed, and the performance achieved
in terms of uniformity and stability is presented.
Abstract
As part of its HL-LHC upgrade program, the CMS collaboration is replacing its existing endcap calorimeters with a high-granularity calorimeter (CE).
The new calorimeter is a sampling ...calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic and hadronic compartments.
Due to its compactness, intrinsic time resolution, and radiation hardness, silicon has been chosen as active material for the regions exposed to higher radiation levels.
The silicon sensors are fabricated as 20 cm (8”) wide hexagonal wafers and are segmented into several hundred pads which are read out individually.
As part of the sensor qualification strategy, 8” sensor irradiation with neutrons has been conducted at the Rhode Island Nuclear Science Center (RINSC) and followed by their electrical characterisation in 2020-21.
The completion of this important milestone in the CE's R&D program is documented in this paper and it provides detailed account of the associated infrastructure and procedures.
The results on the electrical properties of the irradiated CE silicon sensors are presented.
The paper describes a novel neural-network-based approach to study the distributions of secondaries produced in hadronic showers using observables provided by highly granular calorimeters. The ...response is analysed of the highly granular scintillator-steel hadron calorimeter to negative pions with momenta from 10 to 80 GeV simulated with two physics lists from the Geant4 package version 10.3. Several global observables, which characterise different aspects of hadronic shower development, are used as inputs for a deep neural network. The network regression model is trained using a supervised learning and exploiting true information from the simulations. The trained model is applied to predict a number of neutrons and energy of neutral pions produced within a hadronic shower. The achieved performance and possible application of the model to validation of simulations are discussed.
A highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future linear collider experiments. A prototype of 21.5 X0 depth and 180×180mm2 transverse ...dimensions was constructed, consisting of 2160 individually read out 10×45×3mm3 scintillator strips. This prototype was tested using electrons of 2–32 GeV at the Fermilab Test Beam Facility in 2009. Deviations from linear energy response were less than 1.1%, and the intrinsic energy resolution was determined to be (12.5±0.1(stat.)±0.4(syst.))%∕EGeV⊕(1.2±0.1(stat.)−0.7+0.6(syst.))%, where the uncertainties correspond to statistical and systematic sources, respectively.
A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon–tungsten electromagnetic calorimeter. Approximately 350,000 selected π− events at ...energies between 2 and 10GeV have been studied. The predictions of several physics models available within the GEANT4 simulation tool kit are compared to this data. A reasonable overall description of the data is observed; the Monte Carlo predictions are within 20% of the data, and for many observables much closer. The largest quantitative discrepancies are found in the longitudinal and transverse distributions of reconstructed energy.
This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity ...scintillator-silicon photomultiplier calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the average energy response, resolution, and longitudinal shower profiles. Two techniques are applied to reconstruct the initial particle energy from the measured energy depositions; a standard energy reconstruction which is linear in the measured depositions and a software compensation technique based on reweighting individually measured depositions according to their hit energy. The results are compared to predictions of the GEANT 4 physics lists QGSP_BERT_HP and FTFP_BERT_HP.
The studies presented in this paper provide a first experimental test of the Particle Flow Algorithm (PFA) concept using data recorded in high granularity calorimeters. Pairs of overlaid pion showers ...from CALICE 2007 test beam data are reconstructed by the PandoraPFA program developed to implement PFA for a future lepton collider. Recovery of a neutral hadron's energy in the vicinity of a charged hadron is studied. The impact of the two overlapping hadron showers on energy resolution is investigated. The dependence of the confusion error on the distance between a 10GeV neutral hadron and a charged pion is derived for pion energies of 10 and 30GeV which are representative of a 100 GeV jet. The comparison of these test beam data results with Monte Carlo simulation is done for various hadron shower models within the GEANT4 framework. The results for simulated particles and for beam data are in good agreement thereby providing support for previous simulation studies of the power of Particle Flow Calorimetry at a future lepton collider.
The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active ...medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is measured on a statistical basis with high spatial and temporal resolution in sampling calorimeters with tungsten and steel absorbers. The results are compared to GEANT4 (version 9.4 patch 03) simulations with different hadronic physics models. These comparisons demonstrate the importance of using high precision treatment of low-energy neutrons for tungsten absorbers, while an overall good agreement between data and simulations for all considered models is observed for steel.
We study the light output, light collection efficiency and signal timing of a variety of organic scintillators that are being considered for the upgrade of the hadronic calorimeter of the CMS ...detector. The experimental data are collected at the H2 test-beam area at CERN, using a 150 GeV muon beam. In particular, we investigate the usage of over-doped and green-emitting plastic scintillators, two solutions that have not been extensively considered. We present a study of the energy distribution in plastic-scintillator tiles, the hit efficiency as a function of the hit position, and a study of the signal timing for blue and green scintillators.
PDF
