Psychological health problems, especially emotional disorders, are common among adolescents. The epidemiology of emotional disorders is greatly influenced by stressful events. This study sought to ...assess the prevalence rate and socio-demographic correlates of depressive and anxiety symptoms among Chinese adolescents affected by the outbreak of COVID-19. We conducted a cross-sectional study among Chinese students aged 12–18 years during the COVID-19 epidemic period. An online survey was used to conduct rapid assessment. A total of 8079 participants were involved in the study. An online survey was used to collect demographic data, assess students’ awareness of COVID-19, and assess depressive and anxiety symptoms with the Patient Health Questionnaire (PHQ-9) and the Generalized Anxiety Disorder (GAD-7) questionnaire, respectively. The prevalence of depressive symptoms, anxiety symptoms, and a combination of depressive and anxiety symptoms was 43.7%, 37.4%, and 31.3%, respectively, among Chinese high school students during the COVID-19 outbreak. Multivariable logistic regression analysis revealed that female gender was the higher risk factor for depressive and anxiety symptoms. In terms of grades, senior high school was a risk factor for depressive and anxiety symptoms; the higher the grade, the greater the prevalence of depressive and anxiety symptoms. Our findings show there is a high prevalence of psychological health problems among adolescents, which are negatively associated with the level of awareness of COVID-19. These findings suggest that the government needs to pay more attention to psychological health among adolescents while combating COVID-19.
Evapotranspiration (ET) from the land surface is an important component of the terrestrial hydrological cycle. Since the advent of Earth observation by satellites, various models have been developed ...to use thermal and shortwave remote sensing data for ET estimation. In this review, we provide a brief account of the key milestones in the history of remote sensing ET model development in two categories: temperature-based and conductance-based models. Temperature-based ET models utilize land surface temperature (LST) observed through thermal remote sensing to calculate the sensible heat flux from which ET is estimated as a residual of the surface energy balance or to estimate the evaporative fraction from which ET is derived from the available energy. Models of various complexities have been developed to estimate ET from surfaces of different vegetation fractions. One-source models combine soil and vegetation into a composite surface for ET estimation, while two-source models estimate ET of soil and vegetation components separately. Image contexture-based triangular and trapezoid models are simple and effective temperature-based ET models based on spatial and/or temporal variation patterns of LST. Several effective temporal scaling schemes are available for extending instantaneous temperature-based ET estimation to daily or longer time periods. Conductance-based ET models usually use the Penman-Monteith (P-M) equation to estimate ET with shortwave remote sensing data. A key put to these models is canopy conductance to water vapor, which depends on canopy structure and leaf stomatal conductance. Shortwave remote sensing data are used to determine canopy structural parameters, and stomatal conductance can be estimated in different ways. Based on the principle of the coupling between carbon and water cycles, stomatal conductance can be reliably derived from the plant photosynthesis rate. Three types of photosynthesis models are available for deriving stomatal or canopy conductance: (1) big-leaf models for the total canopy conductance, (2) two-big-leaf models for canopy conductances for sunlit and shaded leaf groups, and (3) two-leaf models for stomatal conductances for the average sunlit and shaded leaves separately. Correspondingly, there are also big-leaf, two-big-leaf and two-leaf ET models based on these conductances. The main difference among them is the level of aggregation of conductances before the P-M equation is used for ET estimation, with big-leaf models having the highest aggregation. Since the relationship between ET and conductance is nonlinear, this aggregation causes negative bias errors, with the big-leaf models having the largest bias. It is apparent from the existing literature that two-leaf conductance-based ET models have the least bias in comparison with flux measurements. Based on this review, we make the following recommendations for future work: (1) improving key remote sensing products needed for ET mapping purposes, including soil moisture, foliage clumping index, and leaf carboxylation rate, (2) combining temperature-based and conductance-based models for regional ET estimation, (3) refining methodologies for tight coupling between carbon and water cycles, (4) fully utilizing vegetation structural and biochemical parameters that can now be reliably retrieved from shortwave remote sensing, and (5) to improve regional and global ET monitoring capacity.
•Separating ET models into temperature-based and conductance-based models•Comprehensive accounts for the historical developments of models of these two types•In-depth analysis of bias errors by big-leaf, two-big-leaf and two-leaf ET conductance-based ET models•Future directions for ET research are identified.
Satellite observations show that leaf area index (LAI) has increased globally since 1981, but the impact of this vegetation structural change on the global terrestrial carbon cycle has not been ...systematically evaluated. Through process-based diagnostic ecosystem modeling, we find that the increase in LAI alone was responsible for 12.4% of the accumulated terrestrial carbon sink (95 ± 5 Pg C) from 1981 to 2016, whereas other drivers of CO
fertilization, nitrogen deposition, and climate change (temperature, radiation, and precipitation) contributed to 47.0%, 1.1%, and -28.6% of the sink, respectively. The legacy effects of past changes in these drivers prior to 1981 are responsible for the remaining 65.5% of the accumulated sink from 1981 to 2016. These results refine the attribution of the land sink to the various drivers and would help constrain prognostic models that often have large uncertainties in simulating changes in vegetation and their impacts on the global carbon cycle.
Interventions that incorporated the teaching of self-regulated learning (SRL) strategies are assumed to be effective in improving students' second language (L2) performance as they support students' ...SRL activity and self-efficacy. Nevertheless, previous meta-analyses largely focused on students' language learning achievement, while neglecting the instructional effects on their SRL strategy use and self-efficacy, two key factors in SRL models. This meta-analytic study was thus conducted to address the gap by synthesizing the evidence of SRL interventions in influencing students' L2 learning achievement, strategy use, and self-efficacy. The largest effect was obtained for L2 learning achievement (
g
= 1.39), followed by self-efficacy (
g
= 0.45) and strategy use (
g
= 0.40). Moderator analysis revealed similar instructional effects on students of different age groups and education levels. The duration and intensity of intervention significantly moderated the effectiveness of SRL interventions in the L2 context, especially for strategy use and self-efficacy. The findings obtained in the current study could inform practitioners and researchers of the cumulative effects of SRL interventions in L2 classrooms and study design and student characteristics that moderate the instructional effectiveness.
Using data from a number of radon surveys, it was assessed that on average, radon progeny concentrations in Canadian homes are about three times higher than in school buildings, 4.7 times higher than ...in public buildings and indoor workplaces, and 12 times higher than in outdoor air. Canadian statistics show that most Canadians spend ~70% of their time indoors at home, 20% indoors away from home and 10% in outdoors. Due to relatively higher radon concentration in residential homes and longer time spent indoors at home, the exposure at home contributes to 90% of the radon-induced lung-cancer risk.
•A dual-channel in which the online channel faces a high customer returns.•We identify conditions a retail/an online channel, or a dual-channel structure should be chosen.•A simple three-step process ...to make decisions on channel selection, returns policy, and price.•Implementing PP makes the online channel more attractive and retailer more likely to adopt MBGs.
Sales through an online channel are increasingly popular in the retailing industry. Customers, however, cannot touch or feel a product before they purchase online. This leads to much higher rates of customer returns in the online channel, which in turn leads to significant costs to retailers. In this paper, we develop a model of a dual-channel structure with online and brick-and-mortar channels, in order to determine when a retailer should introduce an online channel and how it should define returns policies for the two channels. We identify the conditions under which a retailer should choose a dual-channel structure, and show that the retailer should offer a Money-Back Guarantee (MBG) in a channel as long as the net salvage value of the returned product is positive in that channel. In addition, if uniform pricing is used in both channels, it is optimal for the retailer to simply set the prices for each channel as if the two channels were operated separately. Our analysis leads to a simple three-step process to help the retailer make a channel selection, choose a product returns policy, and decide on price. We also examine the implications of personalized pricing (PP) in the online channel for the retailer's channel selection and choice of returns policy. We show that PP makes the online channel more attractive and makes the retailer more likely to adopt MBGs. The impact of PP on pricing for both channels is also discussed.
Organic photodetectors (OPDs) have attracted continuous attention due to their outstanding advantages, such as tunability of detecting wavelength, low‐cost manufacturing, compatibility with ...lightweight and flexible devices, as well as ease of processing. Enormous efforts on performance improvement and application of OPDs have been devoted in the past decades. In this Review, recent advances in device architectures and operation mechanisms of phototransistor, photoconductor, and photodiode based OPDs are reviewed with a focus on the strategies aiming at performance improvement. The application of OPDs in spectrally selective detection, wearable devices, and integrated optoelectronics are also discussed. Furthermore, some future prospects on the research challenges and new opportunities of OPDs are covered.
Recent progress in organic photodetectors is reviewed, including different device structures, features, and operation mechanisms. Benefiting from the improved performance, the applications of organic photodetectors for selective detection, wearability, and integrated devices are highlighted.
Enantiomers of 2, 6‐diaminotriptycene (R, R‐1 and S, S‐1) are split by chiral‐phase HPLC and their absolute configurations are identified by single‐crystal X‐ray diffraction technology. Using the ...enantiomers as monomers, a couple of chiral porous polyimides (R‐FTPI and S‐FTPI) are prepared by polycondensation reactions and display good heat stability, high BET surface area and good solubility in organic solvents. Moreover, both of R‐FTPI and S‐FTPI can be cast into robust, free‐standing films suitable for enantioselective separation with symmetrical chiral selectivity.
Chiral porous polyimides (FTPI) were synthesized using monomers of chiral 2,6‐diaminotriptycene. The absolute configurations were identified by single‐crystal X‐ray diffraction. The obtained R‐FTPI and S‐FTPI can be cast into robust, free‐standing films suitable for enantioselective separation with high permeation rates.
Perovskite light‐emitting diodes (PeLEDs) show great application potential in high‐quality flat‐panel displays and solid‐state lighting due to their steadily improved efficiency, tunable colors, ...narrow emission peak, and easy solution‐processing capability. However, because of high optical confinement and nonradiative charge recombination during electron–photon conversion, the highest reported efficiency of PeLEDs remains far behind that of their conventional counterparts, such as inorganic LEDs, organic LEDs, and quantum‐dot LEDs. Here a facile route is demonstrated by adopting bioinspired moth‐eye nanostructures at the front electrode/perovskite interface to enhance the outcoupling efficiency of waveguided light in PeLEDs. As a result, the maximum external quantum efficiency and current efficiency of the modified cesium lead bromide (CsPbBr3) green‐emitting PeLEDs are improved to 20.3% and 61.9 cd A−1, while retaining spectral and angular independence. Further reducing light loss in the substrate mode using a half‐ball lens, efficiencies of 28.2% and 88.7 cd A−1 are achieved, which represent the highest values reported to date for PeLEDs. These results represent a substantial step toward achieving practical applications of PeLEDs.
Highly efficient perovskite light‐emitting diodes are achieved by implementing a simple and cost‐effective method for efficient outcoupling of waveguided light. A record external quantum efficiency of 28.2% is realized for the device based on cesium lead bromide (CsPbBr3), while retaining the same spectral response for broad viewing angles.