Display omitted
For an improved understanding of the relevant particle features for cutaneous use, we studied the effect of the surface charge of acrylic nanocapsules (around 150nm) and the effect of ...a chitosan gel vehicle on the particle penetration into normal and stripped human skin ex vivo as well as local tolerability (cytotoxicity and irritancy). Rhodamin-tagged nanocapsules penetrated and remained in the stratum corneum. Penetration of cationic nanocapsules exceeded the penetration of anionic nanocapsules. When applied on stripped skin, however, the fluorescence was also recorded in the viable epidermis and dermis. Cationic surface charge and embedding the particles into chitosan gel favored access to deeper skin. Keratinocytes took up the nanocapsules rapidly. Cytotoxicity (viability<80%), following exposure for ≥24h, appears to be due to the surfactant polysorbate 80, used for nanocapsuleś stabilization. Uptake by fibroblasts was low and no cytotoxicity was observed. No irritant reactions were detected in the HET-CAM test. In conclusion, the surface charge and chitosan vehicle, as well as the skin barrier integrity, influence the skin penetration of acrylic nanocapsules. Particle localization in the intact stratum corneum of normal skin and good tolerability make the nanocapsules candidates for topical use on the skin, provided that the polymer wall allows the release of the active encapsulated substance.
This review provides a comprehensive and updated overview of the state of the art related to the biomedical applications of nanoparticles coated with chitosan. Discussions were based on selected ...literature in the field. Here, we discussed nanoparticles constituted by polymer, lipid and metal materials, which have been coated with chitosan. In addition, the methodological aspects of the coating process, which is performed by the addition of a chitosan solution into previously prepared nanoparticles or during nanoparticle formation, was reviewed, as well as the techniques employed to confirm an efficient coating process, such as determinations of particle size and zeta potential. Special attention is given to physicochemical and biological advantages brought by the chitosan-coating, such as increase in physicochemical stability, controlled release, improvement of tissue/cells interaction, and increase in the bioavailability of drugs (or active substances) and drug efficacy. We also pointed out safety concerns regarding chitosan-coated nanoparticles based on the results presented so far in the literature.
•Chitosan used as a coating has numerous advantages•Chitosan coated nanoparticles can be prepared by different techniques•Different characterization techniques can be used to prove the coating.
An innovative nanocapsule formulation for parenteral administration using selected vegetable oils (mango, jojoba, pequi, oat, annatto, calendula, and chamomile) was developed that has the potential ...to encapsulate various drugs. The vegetable oil-loaded nanocapsules were prepared by interfacial deposition and compared with capric/caprylic triglyceride-loaded lipid core nanocapsules. The major objective was to investigate the effect of vegetable oils on particle size distribution and physical stability and to determine the hemolytic potential of the nanocapsules, considering their applicability for intravenous administration. Taking into account the importance of accurately determining particle size for the selected route of administration, different size characterization techniques were employed, such as Laser Diffraction, Dynamic Light Scattering, Multiple Light Scattering, Nanoparticle Tracking Analysis, and Transmission Electronic Microscopy. Laser diffraction studies indicated that the mean particle size of all nanocapsules was below 300 nm. For smaller particles, the laser diffraction and multiple light scattering data were in agreement (D3,2-130 nm). Dynamic light scattering and nanoparticle tracking analysis, two powerful techniques that complement each other, exhibited size values between 180 and 259 nm for all nanoparticles. Stability studies demonstrated a tendency of particle creaming for jojoba-nanocapsules and sedimentation for the other nanoparticles; however, no size variation occurred over 30 days. The hemolysis test proved the hemocompatibility of all nanosystems, irrespective of the type of oil. Although all developed nanocapsules presented the potential for parenteral administration, jojoba oil-loaded nanocapsules were selected as the most promising nanoformulation due to their low average size and high particle size homogeneity.
Abstract Background and aim Patients with systemic lupus erythematosus (SLE) have a higher prevalence of subclinical atherosclerosis and higher risk of cardiovascular (CV) events compared to the ...general population. The relative contribution of CV-, immune- and disease-related risk factors to accelerated atherogenesis in SLE is unclear. Methods and results Fifty SLE patients with long-lasting disease (mean age 44 ± 10 years, 86% female) and 50 sex- and age-matched control subjects were studied. Common carotid artery intima-media thickness (CCA-IMT) was used as a surrogate marker of atherosclerosis. We evaluated traditional and immune- and disease-related factors, assessed multiple T-cell subsets by 10-parameter-eight-colour polychromatic flow cytometry and addressed the effect of pharmacological therapies on CCA-IMT. In SLE patients, among several cardiometabolic risk factors, only high-density lipoprotein levels (HDL) and their adenosine triphosphate-binding cassette transporter 1 (ABCA-1)-dependent cholesterol efflux capacity were markedly reduced ( p < 0.01), whereas the CCA-IMT was significantly increased ( p = 0.03) compared to controls. CCA-IMT correlated with systolic blood pressure, low-density lipoprotein (LDL) cholesterol and body mass index (BMI), but not with disease activity and duration. The activated CD4+ HLA-DR+ and CCR5+ T-cell subsets were expanded in SLE patients. Patients under hydroxychloroquine (HCQ) therapy showed lower CCA-IMT (0.62 ± 0.08 vs. 0.68 ± 0.10 mm; p = 0.03) and better risk-factor profile and presented reduced circulating pro-atherogenic effector memory T-cell subsets and a parallel increased percentage of naïve T-cell subsets. Conclusion HDL represents the main metabolic parameter altered in SLE patients. The increased CCA-IMT in SLE patients may represent the net result of a process in which ‘classic’ CV risk factors give a continuous contribution, together with immunological factors (CD4+ HLA-DR+ T cells) which, on the contrary, could contribute through flares of activity of various degrees over time. Patients under HCQ therapy present a modified metabolic profile, a reduced T-cell activation associated with decreased subclinical atherosclerosis.
To evaluate the effect of cationic coating of polymeric nanocapsules in sunscreen formulations on the in vitro skin penetration of benzophenone-3.
Benzophenone-3-loaded nanocapsules were prepared by ...the interfacial deposition of poly(ε-caprolactone) and coated by using a chitosan solution. The nanoparticles were characterized and incorporated in hydrogels. The presence of nanoparticles in hydroxyethyl cellulose gels was observed by transmission electron microscopy and photon correlation spectroscopy. Penetration studies were carried out using Franz cells with porcine skin membranes.
Benzophenone-3-loaded chitosan-coated nanocapsules presented a mean size of 202 ± 7 nm and positive zeta potential (+21 ± 1 mV), while these values for the uncoated nanocapsules were 175 ± 1 nm and -8 ± 1 mV. Penetration profiles showed that a higher amount of benzophenone-3 remained at the skin surface and a lower amount was found in the receptor compartment after the application of the formulation containing chitosan-coated nanocapsules compared to a formulation containing its free form.
Hydrogel containing benzophenone-3 chitosan-coated nanocapsules represents an innovative formulation to overcome limitations of sunscreen daily use.
Synopsis
Sensory analysis has become a valuable tool in qualifying consumer perception regarding cosmetic products. This study aims to explore the application of discriminative and affective ...consumers sensory analysis in evaluating the influence of nanoencapsulation on the sensory properties and rheological characteristics of a cosmetic formulation containing lipoic acid. The nanocapsules were prepared by the pre‐formed polymer precipitation method. Semisolid formulations were prepared using a silicone emulsion system, and these pseudoplastic fluids were characterized using rheological methods. The panellists (n = 88) analysed the formulations with and without nanoencapsulated lipoic acid as paired comparisons within the discriminative and affective sensory analysis. In these measurements, spreadability, stickiness, oiliness and sulphur odour were evaluated. The panellists had no previous training in conducting these measurements. It was shown that nanotechnology can change some sensory characteristics of the formulations. The spreadability, stickiness and oiliness are the attributes for which the panellists noted differences with statistical significance. The spreadability difference could be due to the results found in the rheological profiles and consistency indexes between formulations. In the discriminative analysis, the panellists could not detect any noticeable differences in the sulphur odour or residual properties between samples, attributes that would influence whether consumers adhered to the selected treatment. Considering affective analysis, the consumers communicated that the formulation containing the nanoencapsulated lipoic acid, which presented less consistency, was preferred based on the reduction in immediate stickiness and residual sulphur odour. The free lipoic acid formulation was preferred in terms of residual oiliness and spreadability.
Résumé
L'analyse sensorielle est devenue un outil précieux pour évaluer la perception des produits cosmétiques par les consommateurs. Cet article vise à étudier l'application de l'analyse sensorielle discriminatoire et affective des consommateurs dans l'évaluation de l'influence de la nanoencapsulation sur les propriétés sensorielles et les caractéristiques rhéologiques d'une formulation cosmétique contenant de l'acide lipoïque. Les nanocapsules ont été préparés par le procédé de précipitation de polymère pré‐formé. Des formulations semi‐solides ont été préparées l'aide d'un système d'émulsion de silicone et ces fluides pseudo‐plastiques ont été caractérisés en utilisant des procédés rhéologiques. Les panélistes (n = 88) ont analysé les formulations avec et sans acide lipoïque nanoencapsulé en tant que comparaison par paires à l'aide de l'analyse sensorielle affective et discriminatoire. Dans ces mesures, l'étalement, la viscosité, l'onctuosité et une odeur de soufre ont été évalués. Les panélistes n'ont eu aucune formation préalable en la réalisation de ces mesures. Il a été montré que les nanotechnologies peuvent changer certaines caractéristiques sensorielles des formulations. L'étalement, la viscosité et l'onctuosité sont les attributs pour lesquels les panélistes ont noté des différences avec des statistiques significatives. La différence de l'étalement pourrait être due aux résultats présentés dans les profils rhéologiques et les indices de consistance entre les formulations. Dans l'analyse discriminante, les panelistes ne pouvaient pas détecter d'éventuelles différences notables dans l'odeur du soufre ou des propriétés résiduelles entre les échantillons, des attributs qui pourraient influencer les choix des consommateurs. Considérant l'analyse affective, les consommateurs ont communiqué que la formulation contenant l'acide lipoïque nanoencapsulé, qui a présenté moins de consistance, a été préférée basée sur la réduction immédiate d'adhérence et de l'odeur résiduelle de soufre. La formulation à l'acide lipoïque libre a été préférée en termes de toucher huileux résiduel et d'étalement.
Dark sectors charged under a new Abelian interaction have recently received much attention in the context of dark matter models. These models introduce a light new mediator, the so-called dark photon ...(A^{'}), connecting the dark sector to the standard model. We present a search for a dark photon in the reaction e^{+}e^{-}→γA^{'}, A^{'}→e^{+}e^{-}, μ^{+}μ^{-} using 514 fb^{-1} of data collected with the BABAR detector. We observe no statistically significant deviations from the standard model predictions, and we set 90% confidence level upper limits on the mixing strength between the photon and dark photon at the level of 10^{-4}-10^{-3} for dark photon masses in the range 0.02-10.2 GeV. We further constrain the range of the parameter space favored by interpretations of the discrepancy between the calculated and measured anomalous magnetic moment of the muon.
Although CP violation in the B meson system has been well established by the B factories, there has been no direct observation of time-reversal violation. The decays of entangled neutral B mesons ...into definite flavor states (B(0) or B(0)), and J/ψK(L)(0) or ccK(S)(0) final states (referred to as B(+) or B(-)), allow comparisons between the probabilities of four pairs of T-conjugated transitions, for example, B(0) → B(-) and B(-) → B(0), as a function of the time difference between the two B decays. Using 468 × 10(6) BB pairs produced in Υ(4S) decays collected by the BABAR detector at SLAC, we measure T-violating parameters in the time evolution of neutral B mesons, yielding ΔS(T)(+) = -1.37 ± 0.14(stat) ± 0.06(syst) and ΔS(T)(-) = 1.17 ± 0.18(stat) ± 0.11(syst). These nonzero results represent the first direct observation of T violation through the exchange of initial and final states in transitions that can only be connected by a T-symmetry transformation.
This paper looks at hydraulic modeling as a tool to examine failure modes of a central plant chilled-water system. The program is capable of solving for balanced flows and pressures throughout the ...system and includes detailed models of all pumps, heat exchangers, valves, pipes, and fittings. It allows individual pipelines to be easily shut off, simulating failure modes, and also allows redundant pumps and chillers to be turned on in response to failures. The procedures and results are demonstrated for a theoretical data center with a 5 MW IT load and 12°F (6.6°C) water-side delta t. The results are visualized by creating 2-D plots of the control valve pressure drops in the distribution grid.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
This paper looks at hydraulic modeling as a tool to optimize energy savings from part-load pumping strategies, taking advantage of the fact that redundant pumps and other equipment are typically ...installed in data centers. The commercially available hydraulic analysis package used for analysis is capable of solving for balanced flows and pressures throughout the system, and includes detailed models of all pumps, heat exchangers, valves, pipes and fittings. It allows individual pipelines to be easily shut off, simulating failure modes, and also allows pump speeds to be reduced, allowing for simulation of VFD operation. The procedures and results are demonstrated for a theoretical data center with a 5.5 MWIT Load and 12°F (6.6°C) water-side delta t. Pumping energy savings of over 30% were obtained by making optimal use of redundant equipment. On the other hand, pumping penalties of up to 20% were also noted through careless selection and use of redundant pumps.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
PDF
