As natural gas reserves are generally decreasing there is a need to successfully characterize potential research objects using geophysical data. Presented is a study of amplitude vs. offset, ...attribute and artificial neural network analysis on a research area of a small gas field with one well with commercial accumulations and two wells with only gas shows. The purpose of the research is to aid in future well planning and to distinguish the geophysical data in dry well areas with those from an economically viable well. The amplitude vs. offset analysis shows the lack of anomaly in the wells with only gas shows while the anomaly is present in the economically viable well. The artificial neural network analysis did not aid in the process of distinguishing the possible gas accumulation but it can point out the sedimentological and structural elements within the seismic volume.
The regular working method for well log correlation in the Neogene-Quaternary infill of the Croatian Pannonian Basin is based on visual identification of specific motifs that can be observed ...regionally through the sub-basins or depressions. This method is proven successful through exploration for petroleum accumulations in the aforementioned area but its application is limited outside of the interval of the Upper Miocene sediments and has proven to be subjective. Standard deviation values of well log data from conventional well logs (spontaneous potential, shallow and deep resistivity) were calculated and observed over the entire Neogene-Quaternary well interval for defining new correlation markers which correspond to the old well log marker horizons. Traditionally determined marker horizons did not coincide with those defined by the standard deviation technique. However, new regional horizons were established in the youngest part of the infill, which made more detailed correlation now possible.
The deep saline aquifer (DSA) Poljana in the Upper Pannonian Poljana Sandstones of Sava depression, the SW part of the Pannonian basin system, was identified as a potential CO2 storage object in ...previous works. Its boundaries have been redefined and its general model further developed, including the areal distribution of porosity based on analyses of 23 well logs. The sandstones were deposited in turbiditic and deltaic facies that caused considerable variations of porosity, which was further influenced by diagenetic processes. A comparison of altogether 355 pairs of porosity and permeability measurements on core plugs from 16 wells indicated 2 different sets of samples: impermeable samples with effective porosities reaching 18% and permeable samples which showed correlation between porosity and permeability. Accordingly, the permeability model was developed as semi-categorical with two categories: the first category comprising parts of DSA Poljana with porosity values exceeding 18%, where permeability was correlated with porosity, although with limited reliability, and the second category comprising model cells with porosity values below the threshold of 18%, where permeability should not be correlated with porosity due to the appearance of impermeable values. This approach enabled delineation of areas where permeability can be estimated with greater certainty, which is of utmost importance for the planning and development of CO2 storage projects and/or energy storage projects with respect to fluid injectivity. This approach can be used in areas with similar geological settings and limited datasets as an important step from regional capacity estimations towards the detailed, local-scale investigations.
Bacterial methane is a dominant hydrocarbon component in the Northern Croatia’s Adriatic offshore proven hydrocarbon reservoirs. As onshore reserves are declining the potential of shallow gas ...accumulation, analogue to the Adriatic ones, are being tested. A part of the Lonja Formation (Pliocene Pleistocene and Holocene), the Ravneš Member (Early Pliocene age) is analysed for its maturation and expulsion regarding bacterial methane as potential source and reservoir rocks, especially as it is thermally immature. Two approaches were used for the initial lithology modelling processes - the convergent interpolation and sequential Gaussian simulation. Possibility for trapping and forming of accumulations was also modelled. Results show that selected member has a large source rock potential for bacterial methane with a total volume of 411.53 × 10
m
for the Convergent interpolation model and 520.56 × 10
m
for the sequential Gaussian simulation model of expulsed bacterial methane
Potentially toxic element (PTE) contamination of soils and their sources remains one of key global environmental concerns. Agricultural soil in Kalinovac, Podravina region, Croatia is the subject of ...this study. The main aims include determining the concentration and distribution of PTEs in the soil, differentiation between possible geogenic and anthropogenic sources, and determining the correlation between the analysed PTEs and soil parameters. To achieve these objectives, geochemical analyses of the soil in the study area were carried out. Spatial distribution of the individual PTE contents, enrichment factors (EF), contamination factors (CF), and geoaccumulation index (Igeo) were created using GIS tools. In addition, statistical data processing was carried out, including the calculation of the correlation matrix, hierarchical cluster analysis (HCA), and factor analysis. The obtained results show that certain elements such as lead, chromium, copper, and cadmium were predominantly of anthropogenic origin in the study area, while others tended to have more geogenic origin. By applying different methods used in this study, it is possible to distinguish between geogenic and anthropogenic sources of PTEs in soils of this type.
The Drava Basin in the SW Pannonian Basin System (PBS) was initially formed by passive rifting with accompanying sedimentary infill. Although this has been the subject of much previous work, an ...account of tectonic control has been lacking. Based on cores, wire logging, and seismic data, the tectonostratigraphic interpretation, depositional systems, and control on depositional systems of the syn-rift infill of the eastern part of the Drava Basin were studied. The rifting phase is characterised by the formation of half-grabens, grabens, a sag, and supradetachment basin structures with structural ramp and structural highs. The syn-rift infill can be divided into second-order tectonostratigraphic sequences corresponding to the early and late rift stages. The second-order sequences are further subdivided into third-order tectonostratigraphic sequences formed in response to higher-order tectonic events associated with local rift migration. In contrast to the early-stage structures, the late-stage rift structures are primarily controlled by extensional detachments that represent parts of the Drava Rift Fault System (DRFS). The early syn-rift is characterised by continental deposition through alluvial fans, fan deltas, and lacustrine environments. The late syn-rift stage is characterised by marine deposition in shallow water, fan deltas, and submarine slope-aprons, with deep marine sedimentation and intense volcanic activity. The ramp, basin slopes, and fault scarp slopes represent the major sediment transport pathways involved in the formation of alluvial fans, fan deltas, or submarine slope-aprons. Basinal sedimentation and major depocenters are located within synforms formed by structural lows in the geometry of extensional detachments. This study gives an example of syn-rift tectonic control for the SW part of the PBS and the influence of detachment geometry on basin fill. We have presented an approach based on 3D seismostratigraphic interpretation of tectonostratigraphic sequences, and the correlation of seismic facies with depositional environments developed in a back-arc setting.
•The syn-rift infill of the Drava Basin is characterised by seismic facies and facies associations analysis.•The early rift stage is characterised by continental deposition and the late rift stage is by marine deposition.•Second-order and third-order sequences depict rift infill architecture.•Tectonic forces were the main controlling factors during sedimentation.
Croatia has both significant CO2 emissions from the point sources and a history of oil and gas exploration, and this is why the CCS technology surfaced as a viable solution for curbing CO2 emissions ...on a national level. Since approximately half of emissions from the stationary industrial sources occur along the Adriatic coastline, the entire offshore area became an exploration target. Regional studies revealed the potential storage plays, one of which is in the aquifer of the Mesozoic carbonate complex with dual porosity extending all along the Croatian offshore area. Three structures were chosen in its central part–Klara, Kate and Perina. For the first two, the models were constructed based on the data from old exploration wells and a regional structural map, while for the Perina structure, a new seismic interpretation was added to better characterise its properties. It came out that the Kate structure appears to be the most prospective in general (45 Mt), with neighbouring Klara as the second (39 Mt), while the initially promising Perina (7 Mt) turned out to be of far lesser importance. The Perina structure case is an example that new seismic interpretation can reduce the capacity estimate if it reveals certain limiting factors, in this case, the limitation of structural closure.
Nitrates present one of the most common groundwater contaminants in the world and one of the five major groups of contaminants in the study area. Gaussian simulation (GS) algorithm was used for ...determining the spatial distribution of average nitrate concentrations from 2010 to 2015 on 95 sampling points. Results indicate two main focus areas of nitrate contamination, located on the left and right bank of the Sava River. Those areas generally extend according to groundwater flow, while areas near Sava River have much smaller concentrations. GS showed that they can be useful for this kind of mapping because they favor abrupt changes in data values which are in this case a result of heterogeneous lithological composition of the aquifer.
In future automated vehicles we will often engage in non-driving tasks and will not watch the road. This will affect postural stabilization and may elicit discomfort or even motion sickness in ...dynamic driving. Future vehicles will accommodate this with properly designed seats and interiors, whereas comfortable vehicle motion will be achieved with smooth driving styles and well-designed (active) suspensions. To support research and development in dynamic comfort, this paper presents the validation of a multi-segment full-body human model, including visuo-vestibular and muscle spindle feedback, for postural stabilization. Dynamic driving is evaluated using a “sickening drive”, including a 0.2 Hz 4 m/s2 slalom. Vibration transmission is evaluated with compliant automotive seats, applying 3D platform motion and evaluating 3D translation and rotation of pelvis, trunk and head. The model matches human motion in dynamic driving and reproduces fore–aft, lateral and vertical oscillations. Visuo-vestibular and muscle spindle feedback are shown to be essential, in particular, for head–neck stabilization. Active leg muscle control at the hips and knees is shown to be essential to stabilize the trunk in the high-amplitude slalom condition but not with low-amplitude horizontal vibrations. However, active leg muscle control can strongly affect 4–6 Hz vertical vibration transmission. Compared to the vibration tests, the dynamic driving tests show enlarged postural control gains to minimize trunk and head roll and pitch and to align head yaw with driving direction. Human modelling can enable the insights required to achieve breakthrough comfort enhancements, while enabling efficient developments for a wide range of driving conditions, body sizes and other factors. Hence, modelling human postural control can accelerate the innovation of seats and vehicle motion-control strategies for (automated) vehicles.
Development of CCUS clusters in Croatia Vulin, Domagoj; Močilac, Iva Kolenković; Jukić, Lucija ...
International journal of greenhouse gas control,
March 2023, 2023-03-00, Letnik:
124
Journal Article
Recenzirano
•Stakeholders clustering is crucial for cost-effective implementation of CCUS projects.•Amongst three possible clusters, the Eastern one is the most feasbile.•EOR is considered, but with focus on CO2 ...retention rather than extra oil recovery.•High available theoretical storage capacity allows to consider cross-border options.
Carbon Capture and Storage is a concept that is not yet fully implemented largely because of the high costs. Clustering of industrial stakeholders is imposed as a measure for cost reduction. All relevant emitters, possible transport routes, including existing gas pipeline corridors, and their geographic location in relation to potential storage locations are assessed in this paper. Site availability and CO2 storage capacity are examined, summarizing all study results gathered under the Strategy CCUS project. The CO2 enhanced oil recovery is being studied for CO2 storage rather than extra oil recovery. As logical choices, three clusters were recognized. Only less expensive, onshore injection was taken in consideration for assessment of early (economic) feasibility in the Adriatic, Central, and Eastern clusters. Because of the shorter distance between CO2 emitters and injection sites, the Eastern and Central clusters are being investigated in more detail, despite the fact that the largest point source emitter is in the Adriatic region. Because of small number of point source CO2 emitters and huge theoretical storage capacity, further research is needed to better assess the storage capacities as well as possibilities for development of cross-border projects. Based on previous research (particularly regarding the emitters), the number of facilities (fewer facilities, with more concentrated emissions), and the availability of storage objects, the Eastern cluster is recommended to be further studied as the next stage of Carbon Capture, Utilization and Storage cluster research and development in Croatia and nearby cross-border regions.
PDF
