We are developing gaseous photon detectors for Cherenkov imaging applications in the experiments at the future Electron Ion Collider. CsI, converting photons in the far ultraviolet range, is, so far, ...the only photoconverter compatible with the operation of gaseous detectors. It is very delicate to handle due to its hygroscopic nature: the absorbed water vapour decomposes the CsI molecule. In addition, its quantum efficiency degrades under ion bombardment. These are the key reasons to quest for novel, less delicate materials for photocathodes adequate for gaseous photon detectors. Layers of hydrogenated nanodiamond particles have recently been proposed as an alternative material and have shown promising characteristics. The performance of nanodiamond photocathodes coupled to thick GEM-based detectors is the objects of our ongoing R&D. The first phase of these studies includes the characterization of thick GEM coated with nanodiamond layers and the robustness of its photoconverting properties with respect to the bombardment by ions from the multiplication process in the gaseous detector. The approach is described in detail as well as all the results obtained so far within these exploratory studies.
An upgrade of the near detector of the T2K long baseline neutrino oscillation experiment is currently being conducted. This upgrade will include two new Time Projection Chambers, each equipped with ...16 charge readout resistive Micromegas modules.
A procedure to validate the performance of the detectors at different stages of production has been developed and implemented to ensure a proper and reliable operation of the detectors once installed. A dedicated X-ray test bench is used to characterize the detectors by scanning each pad individually and to precisely measure the uniformity of the gain and the deposited energy resolution over the pad plane. An energy resolution of about 10% is obtained.
A detailed physical model has been developed to describe the charge dispersion phenomena in the resistive Micromegas anode. The detailed physical description includes initial ionization, electron drift, diffusion effects and the readout electronics effects. The model provides an excellent characterization of the charge spreading of the experimental measurements and allowed the simultaneous extraction of gain and charge spreading information of the modules.
We report on a measurement of Spin Density Matrix Elements (SDMEs) in hard exclusive
ρ
0
meson muoproduction at COMPASS using 160 GeV/
c
polarised
μ
+
and
μ
-
beams impinging on a liquid hydrogen ...target. The measurement covers the kinematic range 5.0 GeV/
c
2
<
W
<
17.0 GeV/
c
2
, 1.0 (GeV/
c
)
2
<
Q
2
<
10.0 (GeV/
c
)
2
and 0.01 (GeV/
c
)
2
<
p
T
2
<
0.5 (GeV/
c
)
2
. Here,
W
denotes the mass of the final hadronic system,
Q
2
the virtuality of the exchanged photon, and
p
T
the transverse momentum of the
ρ
0
meson with respect to the virtual-photon direction. The measured non-zero SDMEs for the transitions of transversely polarised virtual photons to longitudinally polarised vector mesons (
γ
T
∗
→
V
L
) indicate a violation of
s
-channel helicity conservation. Additionally, we observe a dominant contribution of natural-parity-exchange transitions and a very small contribution of unnatural-parity-exchange transitions, which is compatible with zero within experimental uncertainties. The results provide important input for modelling Generalised Parton Distributions (GPDs). In particular, they may allow one to evaluate in a model-dependent way the role of parton helicity-flip GPDs in exclusive
ρ
0
production.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The COMPASS RICH-1 detector has undergone a major upgrade in 2016 with the installation of four novel MPGD-based photon detectors. They consist of large-size hybrid MPGDs with multi-layer ...architecture composed of two layers of Thick-GEMs and bulk resistive MicroMegas. A dedicated high voltage power supply system, based on CAEN HV modules, has been built and put in operation: it controls more than 100 HV channels. The system is required to protect the detectors against errors by the operator, monitor voltages and currents at a 1 Hz rate and automatically react to detector misbehavior. It includes also a HV compensation system against environmental pressure and temperature variation to grant the detector stability. The operation of a MPGD based single photon detector poses challenging requirements to the high voltage power supply systems employed in terms of high-resolution diagnostic features and dynamic voltage control. Systems satisfying all the needed features are not commercially available; for this reason a novel single channel high voltage system matching the MPGD needs has been designed and realized. In this article the COMPASS RICH-1 MPGD HV system implementation is described as well as its performance in terms of stability of the novel MPGD-based photon detectors during the physics data taking at COMPASS. The design, implementation and performance of a novel HV power supply system based on DC to DC converters and controlled by a FPGA device is presented. The capabilities of the first prototype of the new single HV channel power supply are illustrated when operated with a MPGD based single photon detector during a test beam exercise. The preliminary result of the multi channel system are briefly discussed.
The next generation of gaseous photon detectors is requested to overcome the limitations of the available technology, in terms of resolution and robustness. The quest for a novel photocathode, ...sensitive in the far vacuum ultra violet wavelength range and more robust than present ones, motivated an R&D programme to explore nanodiamond based photoconverters, which represent the most promising alternative to cesium iodine. A procedure for producing the novel photocathodes has been defined and applied on THGEMs samples. Systematic measurements of the photo emission in different Ar/CH4 and Ar/CO2 gas mixtures with various types of nanodiamond powders have been performed. A comparative study of the response of THGEMs before and after coating demonstrated their full compatibility with the novel photocathodes.
The proposed new Electron–Ion Collider poses a technical and intellectual challenge for the detector design to accommodate the long-term diverse physics goals envisaged by the program. This requires ...a 4π detector system capable of reconstructing the energy and momentum of final state particles with high precision. The Electron-Ion Collider also requires identification of particles of different masses over a wide momentum range.
A diverse spectrum of Particle IDentification detectors has been proposed. Of the four types of detectors for hadron identification, three are based on Ring Imaging Cherenkov Counter technologies, and one is realized by the Time of Flight method. The quest for a novel photocathode, sensitive in the far vacuum ultraviolet wavelength range and more robust than cesium iodide, motivated an R&D programme to explore nano-diamond (ND) based photocathodes, started by a collaboration between INFN and CNR Bari and INFN Trieste. Systematic measurements of the photoemission in different Ar:CH4 and Ar:CO2 gas mixtures with various types of ND powders and Hydrogenated ND (H-ND) powders are reported. A first study of the response of THGEMs coated with different photocathode materials is presented.
The progress of this R&D programme and the results obtained so far by these exploratory studies are described.
In 2016 we have upgraded the COMPASS RICH by novel gaseous photon detectors based on MPGD technology. Four new photon detectors, covering a total active area of 1.5
m
2
, have been installed in order ...to cope with the challenging efficiency and stability requirements of the COMPASS physics programme. The new detector architecture consists in a hybrid MPGD combination: two layers of THGEMs, the first of which also acts as a reflective photocathode thanks to CsI coating, are coupled to a bulk Micromegas on a pad-segmented anode. These detectors are the first application in an experiment of MPGD-based single photon detectors. Presently, we are further developing the MPGD-based PDs to make them adequate for a setup at the future EIC collider. All aspects of the COMPASS RICH-1 Photon Detectors upgrade are presented: R&D, engineering, mass production, QA and performance; the on-going development for collider application is also presented.
In high momenta range, the construction of a Ring Imaging CHerenkov (RICH) detector for the particle identification at the future Electron Ion Collider (EIC) is a complicated task. A compact collider ...setup imposes to construct a RICH with a short radiator length, hence limiting the number of photons. The number of photons can be increase by choosing to work in far UV region. However, as standard fused-silica windows are opaque below 165 nm, therefore, a windowless RICH approach could be a possible choice. In the far UV range, CsI is a widely used photo-cathode (PC) to detect photons, but because of its hygroscopic nature, it is very delicate to handle. Its Quantum Efficiency (QE) degrades in high intensity ion fluxes. These are the key reasons to search a novel, less delicate PC with sensitivity in the far UV region. Hydrogenated nanodiamond films are proposed as an alternative PC material and shown to have promising characteristics. The performance of nanodiamond PC coupled to THGEM-based detectors is the objects of our ongoing R & D.
The first phase of these studies includes the characterization of THGEMs coated with nanodiamont PC, the comparison of the effective QE in vacuum and in gaseous atmospheres, the hardness respect to the PC bombardment by ions from the multiplication process. The approach is described in detail as well as all the results obtained so far with these exploratory studies.
Abstract
The COMPASS RICH-1 detector underwent major upgrade in 2016 with the installation of four
novel MPGD-based photon detectors. They consist of large-size hybrid MPGDs with multi-layer
...architecture composed of two layers of Thick-GEMs and bulk resistive Micromegas. A dedicated high
voltage power supply system, realized with commercial devices, has been put in operation to
protect the detectors against errors by the operator, monitor and log voltages and currents at a 1 Hz rate, and automatically react to detector misbehavior; it includes also the HV compensation for
the detector gas pressure and temperature variations.
The needs posed to the high voltage
power supply systems by the operation of Micro Pattern Gaseous Detectors pushed the development of
a novel single channel HV system able to overcome the performance of the commercial devices in
terms of high-resolution diagnostic features and intelligent dynamic voltage control. In this talk
the COMPASS HV system and its performance are illustrated, as well as the stability of the novel
MPGD-based photon detectors during the physics data taking at COMPASS. The performance of the
novel single channel power supply system when connected to a single photon Micro Pattern Gaseous
Detector is presented in realistic working condition during a test beam with the preliminary
results of multiple channels operation.
An upgrade of the near detector of the T2K long baseline neutrino oscillation experiment is currently being conducted. This upgrade will include two new Time Projection Chambers, each equipped with ...16 charge readout resistive Micromegas modules. A procedure to validate the performance of the detectors at different stages of production has been developed and implemented to ensure a proper and reliable operation of the detectors once installed. A dedicated X-ray test bench is used to characterize the detectors by scanning each pad individually and to precisely measure the uniformity of the gain and the deposited energy resolution over the pad plane. An energy resolution of about 10% is obtained. A detailed physical model has been developed to describe the charge dispersion phenomena in the resistive Micromegas anode. The detailed physical description includes initial ionization, electron drift, diffusion effects and the readout electronics effects. The model provides an excellent characterization of the charge spreading of the experimental measurements and allowed the simultaneous extraction of gain and RC information of the modules.
PDF
