Display omitted
•Mature capsid size and shape are determined during the assembly of procapsids.•Intra-capsomer and inter-capsomer contacts are critical for regulating procapsid assembly.•Coat protein ...subunits often have extra loops and domains with roles in assembly.
dsDNA Bacteriophages, some dsDNA archaeal viruses and the Herpesviruses share many features including a common capsid assembly pathway and coat protein fold. The coat proteins of these viruses, which have the HK97 fold, co-assemble with a free or attached scaffolding protein and other capsid proteins into a precursor capsid, known as a procapsid or prohead. The procapsid is a metastable state that increases in stability as a result of morphological changes that occur during the dsDNA packaging reaction. We review evidence from several systems indicating that proper contacts acquired in the assembly of the procapsid are critical to forming the correct morphology in the mature capsid.
The large (90-nm) icosahedral capsid of bacteriophage T5 is composed of 775 copies of the major capsid protein (mcp) together with portal, protease, and decoration proteins. Its assembly is a ...regulated process that involves several intermediates, including a thick-walled round precursor prohead that expands as the viral DNA is packaged to yield a thin-walled and angular mature capsid. We investigated capsid maturation by comparing cryoelectron microscopy (cryo-EM) structures of the prohead, the empty expanded capsid both with and without decoration protein, and the virion capsid at a resolution of 3.8 Å for the latter. We detail the molecular structure of the mcp, its complex pattern of interactions, and their evolution during maturation. The bacteriophage T5 mcp is a variant of the canonical HK97-fold with a high level of plasticity that allows for the precise assembly of a giant macromolecule and the adaptability needed to interact with other proteins and the packaged DNA.
Bacteriophage λ makes two proteins with overlapping amino acid sequences that are essential for tail assembly. These two proteins, gpG and gpGT, are related by a programmed translational frameshift ...that is conserved among diverse phages and functions in λ to ensure that gpG and the frameshift product gpGT are made in a molar ratio of approximately 30:1. Although both proteins are required and must be present in the correct ratio for assembly of functional tails, neither is present in mature tails. During λ tail assembly, major tail protein gpV polymerizes to form a long tube whose length is controlled by the tape measure protein gpH. We show that the “G” domains of gpG and gpGT bind to all or parts of tail length tape measure protein gpH and that the “T” domain of gpGT binds to major tail shaft subunit gpV, and present a model for how gpG and gpGT chaperone gpH and direct the polymerization of gpV to form a tail of the correct length.
Display omitted
•Chaperones gpG and gpGT bind directly to bacteriophage λ's tape measure protein gpH.•λ tail tape measure protein gpH requires co-expression of chaperones for function.•Overexpression of gpGT causes λ tail tube protein gpV to polymerize into long tubes.•The T part of gpGT binds to gpV, suggesting that it recruits gpV for assembly around gpH.
Large icosahedral viruses that infect bacteria represent an extreme of the coevolution of capsids and the genomes they accommodate. One subset of these large viruses is the jumbophages, tailed phages ...with double-stranded DNA genomes of at least 200,000 bp. We explored the mechanism leading to increased capsid and genome sizes by characterizing structures of several jumbophage capsids and the DNA packaged within them. Capsid structures determined for six jumbophages were consistent with the canonical phage HK97 fold, and three had capsid geometries with novel triangulation numbers (T=25, T=28, and T=52). Packaged DNA (chromosome) sizes were larger than the genome sizes, indicating that all jumbophages use a head-full DNA packaging mechanism. For two phages (PAU and G), the sizes appeared very much larger than their genome length. We used two-dimensional DNA gel electrophoresis to show that these two DNAs migrated abnormally due to base modifications and to allow us to calculate their actual chromosome sizes. Our results support a ratchet model of capsid and genome coevolution whereby mutations lead to increased capsid volume and allow the acquisition of additional genes. Once the added genes and larger capsid are established, mutations that restore the smaller size are disfavored.
A large family of viruses share the same fold of the capsid protein as bacteriophage HK97, a virus that infects bacteria. Members of this family use different numbers of the capsid protein to build capsids of different sizes. Here, we examined the structures of extremely large capsids and measured their DNA content relative to the sequenced genome lengths, aiming to understand the process that increases size. We concluded that mutational changes leading to larger capsids become locked in by subsequent changes to the genome organization.
The long flexible tail tube of bacteriophage lambda connects its capsid to the tail tip. On infection, a DNA ejection signal is passed from the tip, along the tube to the capsid that triggers passage ...of the DNA down the tube and into the host bacterium. The tail tube is built from repeating units of the major tail protein, gpV, which has two distinctive domains. Its N-terminal domain has the same fold as proteins that form the rigid inner tubes of contractile tail phages, such as T4, and its C-terminal domain adopt an Ig-like fold of unknown function. We determined structures of the lambda tail tube in free tails and in virions before and after DNA ejection using cryoelectron microscopy. Modeling of the density maps reveals how electrostatic interactions and a mobile loop participate in assembly and also impart flexibility to the tube while maintaining its integrity. We also demonstrate how a common protein fold produces rigid tubes in some phages but flexible tubes in others.
Display omitted
•The flexibility of siphoviridae tails interferes with structure determination.•Tail assembly uses electrostatic interactions and traps dynamic segments.•Tail protein Ig-like domains form ordered filaments around the tail tube.•Tail tubes show little change in structure after DNA injection.•The new model explains how pH and ionic strength effect tail integrity.
The portal proteins of tailed bacteriophage and Herpesvirus capsids form dodecameric rings that occupy one capsid vertex and are incorporated during the assembly of capsid precursors called ...procapsids or proheads. Portals are essential and serve as the pore for DNA transit and the site of tail attachment; however, bacteriophage HK97 capsid proteins assemble efficiently without a portal when expressed from plasmids. Following portal co-expression, portals were incorporated into about half of the proheads that were made. In the absence of active capsid maturation protease, uncleaved proheads formed dimers, trimers, and tetramers of proheads during purification, but only if they had portals. These appeared bound to membrane-like fragments by their portals and could be disaggregated by detergents, supporting a role for membranes in their formation and in capsid assembly. The precursors to prohead oligomers were detected in cell extracts. These were able to bind to Octyl-Sepharose and could be released by detergent, while uncleaved proheads without portal or cleaved proheads with portal did not bind. Our results document a discrete change in the HK97 portal’s hydrophobicity induced by cleavage of the procapsid shell in which it is embedded. Additionally, we detected an increase in the rate of expansion induced by the presence of a portal complex in cleaved HK97 proheads. These results suggest that portals and capsids influence each other’s conformation during assembly. The formation of prohead oligomers also provides a rapid and sensitive assay for identification and analysis of portal incorporation mutants.
Display omitted
•The influence of the portal on HK97 capsid assembly and biochemistry was explored.•HK97 procapsids have “sticky” portals until the scaffolding domain is proteolyzed.•Sticky procapids bind to Octyl-Sepharose and to membrane-like material in lysates.•Mature procapsids expand ~50 times faster when a portal is present.•Portals lose hydrophobicity after scaffold loss and prime capsids to expand rapidly.
The crystal structure of the double-stranded DNA bacteriophage HK97 mature empty capsid was determined at 3.6 angstrom resolution. The 660 angstrom diameter icosahedral particle contains 420 subunits ...with a new fold. The final capsid maturation step is an autocatalytic reaction that creates 420 isopeptide bonds between proteins. Each subunit is joined to two of its neighbors by ligation of the side-chain lysine 169 to asparagine 356. This generates 12 pentameric and 60 hexameric rings of covalently joined subunits that loop through each other, creating protein chainmail: topologically linked protein catenanes arranged with icosahedral symmetry. Catenanes have not been previously observed in proteins and provide a stabilization mechanism for the very thin HK97 capsid.
Lambda-like double-stranded (ds) DNA bacteriophage undergo massive conformational changes in their capsid shell during the packaging of their viral genomes. Capsid shells are complex organizations of ...hundreds of protein subunits that assemble into intricate quaternary complexes that ultimately are able to withstand over 50 atm of pressure during genome packaging. The extensive integration between subunits in capsids requires the formation of an intermediate complex, termed a procapsid, from which individual subunits can undergo the necessary refolding and structural rearrangements needed to transition to the more stable capsid. Although various mature capsids have been characterized at atomic resolution, no such procapsid structure is available for a dsDNA virus or bacteriophage. Here we present a procapsid X-ray structure at 3.65 Å resolution, termed prohead II, of the lambda-like bacteriophage HK97, the mature capsid structure of which was previously solved to 3.44 Å (ref. 2). A comparison of the two largely different capsid forms has unveiled an unprecedented expansion mechanism that describes the transition. Crystallographic and hydrogen/deuterium exchange data presented here demonstrate that the subunit tertiary structures are significantly different between the two states, with twisting and bending motions occurring in both helical and -sheet regions. We also identified subunit interactions at each three-fold axis of the capsid that are maintained throughout maturation. The interactions sustain capsid integrity during subunit refolding and provide a fixed hinge from which subunits undergo rotational and translational motions during maturation. Previously published calorimetric data of a closely related bacteriophage, P22, showed that capsid maturation was an exothermic process that resulted in a release of 90 kJ mol-1 of energy. We propose that the major tertiary changes presented in this study reveal a structural basis for an exothermic maturation process probably present in many dsDNA bacteriophage and possibly viruses such as herpesvirus, which share the HK97 subunit fold.
Celotno besedilo
Dostopno za:
DOBA, IJS, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
A programmed translational frameshift similar to frameshifts in retroviral
gag-pol genes and bacterial insertion elements was found to be strongly conserved in tail assembly genes of dsDNA phages and ...to be independent of sequence similarities. In bacteriophage λ, this frameshift controls production of two proteins with overlapping sequences, gpG and gpGT, that are required for tail assembly. We developed bioinformatic approaches to identify analogous −1 frameshifting sites and experimentally confirmed our predictions for five additional phages. Clear evidence was also found for an unusual but analogous −2 frameshift in phage Mu. Frameshifting sites could be identified for most phages with contractile or noncontractile tails whose length is controlled by a tape measure protein. Phages from a broad spectrum of hosts spanning Eubacteria and Archaea appear to conserve this frameshift as a fundamental component of their tail assembly mechanisms, supporting the idea that their tail genes share a common, distant ancestry.
Abstract The 102 residue N-terminal extension of the HK97 major capsid protein, the delta domain, is normally present during the assembly of immature HK97 procapsids, but it is removed during ...maturation like well-known internal scaffolding proteins of other tailed phages and herpesviruses. The delta domain also shares other unusual properties usually found in other viral and phage scaffolding proteins, including its location on the inside of the capsid, a high predicted and measured α-helical content, and an additional prediction for the ability to form parallel coiled-coils. Viral scaffolding proteins are essential for capsid assembly and phage viability, so we tested whether the HK97 delta domain was essential for capsid assembly. We studied the effects of deleting all or parts of the delta domain on capsid assembly and on complementation of capsid-protein-defective phage, and our results demonstrate that the delta domain is required for HK97 capsid assembly.