To avoid the negative impact of plastic on the environment and on human health and to improve the circular economy, the search for new and cost-efficient methods for the depolymerization of plastic ...waste into value added compounds is extremely desirable. In recent years, reductive depolymerization has emerged as an excellent alternative methodology for the valorization of plastic waste and has gained interest as it allows plastic waste to be transformed into value-added products, which cannot be obtained by other recycling processes. Catalysts can have a fundamental role in this subject. This review aims to describe the most relevant catalytic methodologies for the reductive depolymerization of polyester, polycarbonate and polyamide waste into value-added compounds.
Reductive depolymerization allows the valorization of polyester, polycarbonate and polyamide waste in a wide variety of value-added compounds with good yields
Plastic pollution is one of the biggest problems all over the world. Beyond change/awareness of consumer behavior, there is an urgent need to search for efficient, economical and environmentally ...friendly catalysts for the valorization of plastic waste to value‐added compounds. This work describes the reductive depolymerization of several types of plastic waste into value‐added compounds, including 1,6‐hexanediol, 1,2‐propanediol, p‐xylene and tetrahydrofuran, in good yields using the eco‐friendly, air‐stable, commercially available and very cheap catalyst Zn(OAc)2 ⋅ 2H2O. This is the first example of the reductive depolymerization of polyester waste catalyzed by a zinc catalyst. Moreover, the catalytic system silane/Zn(OAc)2 ⋅ 2H2O was successfully applied to the reduction of polycaprolactone (PCL) on the gram scale with good yield and also to the selective reductive depolymerization of plastic mixtures. Finally, this work demonstrated that the catalyst Zn(OAc)2 ⋅ 2H2O can be used in at least 7 cycles with good yields.
Waste not, want not: Zn(OAc)2 ⋅ 2H2O is used as a cost‐effective catalyst for the reductive depolymerization of several types of plastic waste into value‐added compounds including 1,6‐hexanediol, 1,2‐propanediol, p‐xylene and THF.
Laser‐induced graphene (LIG) can be obtained by irradiation of a polymer by a laser source. The present work demonstrates that it is possible to obtain this kind of material using an ultraviolet ...laser instead of the typical infrared source. Using this approach, a fourfold decrease in the penetration depth (5 µm) is achieved, while the spatial resolution is doubled. Electromechanical strain LIG sensors are patterned in polyimide substrates with different thicknesses and their performance to strain, bending, and force inputs is measured. A low‐cost arterial pulse wave monitor is built, exploring the high force sensitivity of the sensors produced on the thinner substrates.
Laser‐induced graphene is obtained by irradiation of polyimide by an ultraviolet laser instead of the typical infrared source, with a fourfold decrease in the penetration depth and doubled spatial resolution. Electromechanical strain sensors are patterned in substrates with different thicknesses and their performance is measured. A low‐cost arterial pulse wave monitor is built, exploring the higher sensitivity of thinner substrates.
Mercury is a toxic metal that can be found in the environment in three different forms - elemental, organic and inorganic. Inorganic mercury has a lower liposolubility, which results in a lower ...organism absorption and reduced passage through the blood-brain barrier. For this reason, exposure models that use inorganic mercury in rats in order to evaluate its effects on the central nervous system are rare, especially in adult subjects. This study investigated if a chronic exposure to low doses of mercury chloride (HgCl2), an inorganic form of mercury, is capable of promoting motor alterations and neurodegenerative in the motor cortex of adult rats. Forty animals were exposed to a dose of 0.375 mg/kg/day, for 45 days. They were then submitted to motor evaluation and euthanized to collect the motor cortex. Measurement of mercury deposited in the brain parenchyma, evaluation of oxidative balance, quantification of cellular cytotoxicity and apoptosis and density of mature neurons and astrocytes of the motor cortex were performed. It was observed that chronic exposure to inorganic mercury caused a decrease in balance and fine motor coordination, formation of mercury deposits and oxidative stress verified by the increase of lipoperoxidation and nitrite concentration and a decrease of the total antioxidant capacity. In addition, we found that this model of exposure to inorganic mercury caused cell death by cytotoxicity and induction of apoptosis with a decreased number of neurons and astrocytes in the motor cortex. Our results provide evidence that exposure to inorganic mercury in low doses, even in spite of its poor ability to cross biological barriers, is still capable of inducing motor deficits, cell death by cytotoxicity and apoptosis, and oxidative stress in the motor cortex of adult rats.
Plastic pollution is one of the biggest problems all over the world. Beyond change/awareness of consumer behavior, there is an urgent need to search for efficient, economical and environmentally ...friendly catalysts for the valorization of plastic waste to value-added compounds. This work describes the reductive depolymerization of several types of plastic waste into value-added compounds, including 1,6-hexanediol, 1,2-propanediol, p-xylene and tetrahydrofuran, in good yields using the eco-friendly, air-stable, commercially available and very cheap catalyst Zn(OAc)
⋅ 2H
O. This is the first example of the reductive depolymerization of polyester waste catalyzed by a zinc catalyst. Moreover, the catalytic system silane/Zn(OAc)
⋅ 2H
O was successfully applied to the reduction of polycaprolactone (PCL) on the gram scale with good yield and also to the selective reductive depolymerization of plastic mixtures. Finally, this work demonstrated that the catalyst Zn(OAc)
⋅ 2H
O can be used in at least 7 cycles with good yields.
Biomaterials conceived for vectorization of bioactives are currently considered for biomedical, biological, and environmental applications. We have produced a pH-sensitive biomaterial composed of ...natural source alginate and chitosan polysaccharides for application as a drug delivery system via oral administration. The composite particle preparation was in situ monitored by means of isothermal titration calorimetry. The strong interaction established between the macromolecules during particle assembly led to 0.60 alginate/chitosan effective binding sites with an intense exothermic effect and negative enthalpy variation on the order of a thousand kcal/mol. In the presence of model drugs mebendazole and ivermectin, with relatively small and large structures, respectively, mebendazole reduced the amount of chitosan monomers available to interact with alginate by 27%, which was not observed for ivermectin. Nevertheless, a state of intense negative Gibbs energy and large entropic decrease was achieved, providing evidence that formation of particles is thermodynamically driven and favored. Small-angle X-ray scattering provided further evidence of similar surface aspects independent of the presence of drug. The physical responses of the particles to pH variation comprise partial hydration, swelling, and the predominance of positive surface charge in strong acid medium, whereas ionization followed by deprotonation leads to compaction and charge reversal rather than new swelling in mild and slightly acidic mediums, respectively. In vivo performance was evaluated in the treatment of endoparasites in Corydoras fish. Systematically with a daily base oral administration, particles significantly reduced the infections over 15 days of treatment. The experiments provide evidence that utilizing particles granted and boosted the action of the antiparasitic drugs, leading to substantial reduction or elimination of infection. Hence, the pH-responsive particles represent a biomaterial with prominent characteristics that is promising for the development of targeted oral drug delivery.
Solid by-products with lignocellulosic structures are considered appropriate substrates for solid-state fermentation (SSF) to produce enzymes with diverse industrial applications. In this work, ...brewer's spent grain (BSG), rice husk (RH), and vine shoot trimmings (VSTs) were employed as substrates in SSF with
CECT 2088 to produce cellulases, xylanases, and amylases. The addition of 2% (NH
)
SO
and 1% K
HPO
to by-products had a positive effect on enzyme production. Substrate particle size influenced enzyme activity and the overall highest activities were achieved at the largest particle size (10 mm) of BSG and RH and a size of 4 mm for VSTs. Optimal substrate composition was predicted using a simplex centroid mixture design. The highest activities were obtained using 100% BSG for
-glucosidase (363 U/g) and endo-1,4-
-glucanase (189 U/g), 87% BSG and 13% RH for xylanase (627 U/g), and 72% BSG and 28% RH for amylase (263 U/g). Besides the optimal values found, mixtures of BSG with RH or VSTs proved to be alternative substrates to BSG alone. These findings demonstrate that SSF bioprocessing of BSG individually or in mixtures with RH and VSTs is an efficient and sustainable strategy to produce enzymes of significant industrial interest within the circular economy guidelines.
Macrophages are central cells both in the immune response and in iron homeostasis. Iron is both essential and potentially toxic. Therefore, iron acquisition, transport, storage, and release are ...tightly regulated, by several important proteins. Cytosolic ferritin is an iron storage protein composed of 24 subunits of either the L- or the H-type chains. H-ferritin differs from L-ferritin in the capacity to oxidize Fe
to Fe
. In this work, we investigated the role played by H-ferritin in the macrophages' ability to respond to immune stimuli and to deal with exogenously added iron. We used mice with a conditional deletion of the H-ferritin gene in the myeloid lineage to obtain bone marrow-derived macrophages. These macrophages had normal viability and gene expression under basal culture conditions. However, when treated with interferon-gamma and lipopolysaccharide they had a lower activation of Nitric Oxide Synthase 2. Furthermore, H-ferritin-deficient macrophages had a higher sensitivity to iron-induced toxicity. This sensitivity was associated with a lower intracellular iron accumulation but a higher production of reactive oxygen species. These data indicate that H-ferritin modulates macrophage response to immune stimuli and that it plays an essential role in protection against iron-induced oxidative stress and cell death.
Catalytic distillation is a technology that combines a heterogeneous catalytic reaction and the separation of reactants and products via distillation in a single reactor/distillation system. This ...process combines catalysis, kinetics, and mass transfer to obtain more selective products. The heterogeneous catalyst provides the sites for catalytic reactions and the porous surface for liquid/vapor separation. The advantages of catalytic distillation are energy savings, low waste streams, catalyst longevity, higher conversion, and product selectivity; these properties are interesting for petrochemical and petroleum industries. For this study, 100 mL of atmospheric residue of petroleum (ATR) was distilled in the presence of 1.0 g of a micro/mesoporous catalyst composed of a HY-MCM-41, and the reactor used was an OptiDist automatic distillation device, operating according to ASTM D-86 methodology. The products were collected and analyzed by gas chromatography. The samples of ATR, HY/ATR, and HY-MCM-41/ATR were analyzed by thermogravimetry (TG) to determine the activation energies (Ea) relative to the thermal decomposition of the process, using the Ozawa–Flynn–Wall (OFW) kinetic model. The obtained results show a potential catalytic distillation system for use in the reaction of heavy petroleum fractions and product separation from the HY/MCM-41 micro/mesoporous catalyst. The TG data revealed two mass loss events for ATR in the ranges of 100–390 and 390–590 °C, corresponding to volatilization and thermal cracking, respectively. The Ea determined for the thermal degradation of the ATR without a catalyst was in the range of 83–194 kJ/mol, whereas in the presence of the HY-MCM-41 catalyst, it decreased to 61–105 kJ/mol, evidencing the catalytic effect of the micro-mesoporous material. The chromatography analysis allowed for the identification of gasoline and a major production of diesel and gasoil when the HY-MCM-41 mixture was used as the catalyst, evidencing the synergism of the combined effect of the acid sites, the crystalline phase, and the microporosity of the HY zeolite with the accessibility of the hexagonal mesoporous structure of the MCM-41 material.
This manuscript describes a novel class of N-acylhydrazone (NAH) derivatives that act as histone deacetylase (HDAC) 6/8 dual inhibitors and were designed from the structure of trichostatin A (1). ...Para-substituted phenyl-hydroxamic acids presented a more potent inhibition of HDAC6/8 than their meta analogs. In addition, the effect of compounds (E)-4-((2-(4-(dimethylamino)benzoyl)hydrazono)methyl)-N-hydroxybenzamide (3c) and (E)-4-((2-(4-(dimethylamino)benzoyl)-2-methylhydrazono)methyl)-N-hydroxybenzamide (3f) on the acetylation of α-tubulin revealed an increased level of acetylation. These two compounds also affected cell migration, indicating their inhibition of HDAC6. An analysis of the antiproliferative activity of these compounds, which presented the most potent activity, showed that compound 3c induced cell cycle arrest and 3g induced apoptosis through caspase 3/7 activation. These results suggest HDAC6/8 as a potential target of future molecular therapies for cancer.
PDF
