Display omitted
•Water quality evaluation of impacted coastal lagoons.•Integration of chemical and bioanalytical data in Spanish Mediterranean coastline.•91 organic micropollutants identified by ...means of Ion Mobility-HRMS.•Predicted individual toxicity as an aid for data integration.
The Spanish Mediterranean basin is particularly susceptible to climate change and human activities, making it vulnerable to the influence of anthropogenic contaminants. Therefore, conducting comprehensive and exhaustive water quality assessment in relevant water bodies of this basin is pivotal. In this work, surface water samples from coastal lagoons or estuaries were collected across the Spanish Mediterranean coastline and subjected to target and suspect screening of 1,585 organic micropollutants by liquid chromatography coupled to ion mobility separation and high resolution mass spectrometry. In total, 91 organic micropollutants could be confirmed and 5 were tentatively identified, with pharmaceuticals and pesticides being the most prevalent groups of chemicals. Chemical analysis data was compared with data on bioanalysis of those samples (recurrent aryl hydrocarbon receptor (AhR) activation, and estrogenic receptor (ER) inhibition in wetland samples affected by wastewater streams). The number of identified organic contaminants containing aromatic rings could explain the AhR activation observed. For the ER antagonistic effects, predictions on estrogenic inhibition potency for the detected compounds were used to explain the activities observed. The integration of chemical analysis with bioanalytical observations allowed a comprehensive overview of the quality of the water bodies under study.
The present paper describes the development of a method for the simultaneous determination of five hormonally active UV filters namely benzophenone-3 (BP3), 3-(4-methylbenzylidene) camphor (4MBC), ...2-ethylhexyl 4-(dimethylamino) benzoate (OD-PABA), 2-ethylhexyl 4-methoxycinnamate (EHMC) and octocrylene (OC) by means of solid-phase extraction and gas chromatography–electron impact ionization–mass spectrometry. Under optimized conditions, this methodology achieved low method limits of detection (needed for clean waters, especially drinking water analysis), between 0.02 and 8.42 ng/L, and quantitative recovery rates higher than 73% in all cases. Inter- and intraday precision for all compounds were lower than 7% and 11%, respectively. The optimized methodology was applied to perform the first survey of UV absorbing compounds in tap water from the metropolitan area and the city of Barcelona (Catalonia, Spain). In addition, other types of clean water matrices (mineral bottled water, well water and tap water treated with an ion-exchange resin) were investigated as well. Results evidenced that all the UV filters investigated were detected in the water samples analyzed. The compounds most frequently found were EHMC and OC. Maximum concentrations reached in tap water were 290 (BP3), 35 (4MBC), 110 (OD-PABA), 260 (EHMC), and 170 ng/L (OC). This study constitutes the first evidence of the presence of UV filter residues in tap water in Europe.
Display omitted
•Suspect screening approach for organohalogens, based on market data.•Potential contamination sources identified from spatiotemporal occurrence patterns.•Seven unknown structures, ...potentially discharged from WWTPs, were identified.
Wastewater treatment plants (WWTPs) are known point sources of contaminants of emerging concern (CECs) to the aquatic environment, but current knowledge is mostly limited to well-known chemical structures. In this study, we sought to identify unknown CECs polluting the aquatic environment through a novel suspect screening approach for organohalogens, i.e. organic halogenated molecules often toxic and resistant to transformation and characterised as persistent organic pollutants (POPs). Surface water samples were collected with passive samplers in the Fyris River catchment (Uppsala, Sweden), analysed using liquid chromatography high-resolution mass spectrometry (LC-HRMS) and screened for organohalogens using a suspect screening approach based on market data obtained from a regulatory authority. Thirteen suspects from very different application areas were confirmed or tentatively identified with high confidence, including seven previously unknown structures (diflufenican, chlorzoxazone, 3-(3,4-dichlorophenyl)-1,1-dimethylurea, 2,4-disulfamyl-5-trifluoromethylaniline, 5-amino-2-chlorotoluene-4-sulfonic acid, perfluoropentane-1-sufonic acid, (2-chlorophenyl)(hydroxy)methanesulfonic acid). Spatiotemporal occurrence patterns were detected, which helped to understand the usage pattern of the chemicals and pinpoint potential pollution sources, e.g. specific WWTPs in the catchment. Several of the newly identified structures had virtually no information publicly available and were detected years after their last registered use, which highlights the knowledge gaps and concerns about POPs.
Display omitted
•Collaborative trial of 16 laboratories on suspect and non-target screening (NTS) in fish.•Comparison of test extracts by in-house and reference methods (GC-HRMS, ...LC-HRMS)•Reproducibility between sample preparation methods was not significantly different.•On average, 41% (LC-HRMS) and 37% (GC-HRMS) of spiked compounds were identified.
A collaborative trial involving 16 participants from nine European countries was conducted within the NORMAN network in efforts to harmonise suspect and non-target screening of environmental contaminants in whole fish samples of bream (Abramis brama). Participants were provided with freeze-dried, homogenised fish samples from a contaminated and a reference site, extracts (spiked and non-spiked) and reference sample preparation protocols for liquid chromatography (LC) and gas chromatography (GC) coupled to high resolution mass spectrometry (HRMS). Participants extracted fish samples using their in-house sample preparation method and/or the protocol provided. Participants correctly identified 9-69% of spiked compounds using LC-HRMS and 20-60% of spiked compounds using GC-HRMS. From the contaminated site, suspect screening with participants’ own suspect lists led to putative identification of on average ∼145 and ∼20 unique features per participant using LC-HRMS and GC-HRMS, respectively, while non-target screening identified on average ∼42 and ∼56 unique features per participant using LC-HRMS and GC-HRMS, respectively. Within the same sub-group of sample preparation method, only a few features were identified by at least two participants in suspect screening (16 features using LC-HRMS, 0 features using GC-HRMS) and non-target screening (0 features using LC-HRMS, 2 features using GC-HRMS). The compounds identified had log octanol/water partition coefficient (KOW) values ranging from -9.9 to 16 and mass-to-charge ratio (m/z) of 68 to 761 (LC-HRMS and GC-HRMS). A significant linear trend was found between log KOW and m/z for the GC-HRMS data. Overall, these findings indicate that differences in screening results are mainly due to the data analysis workflows used by different participants. Further work is needed to harmonise the results obtained when applying suspect and non-target screening approaches to environmental biota samples.
Increasing production and use of chemicals and awareness of their impact on ecosystems and humans has led to large interest for broadening the knowledge on the chemical status of the environment and ...human health by suspect and non-target screening (NTS). To facilitate effective implementation of NTS in scientific, commercial and governmental laboratories, as well as acceptance by managers, regulators and risk assessors, more harmonisation in NTS is required. To address this, NORMAN Association members involved in NTS activities have prepared this guidance document, based on the current state of knowledge. The document is intended to provide guidance on performing high quality NTS studies and data interpretation while increasing awareness of the promise but also pitfalls and challenges associated with these techniques. Guidance is provided for all steps; from sampling and sample preparation to analysis by chromatography (liquid and gas—LC and GC) coupled via various ionisation techniques to high-resolution tandem mass spectrometry (HRMS/MS), through to data evaluation and reporting in the context of NTS. Although most experience within the NORMAN network still involves water analysis of polar compounds using LC–HRMS/MS, other matrices (sediment, soil, biota, dust, air) and instrumentation (GC, ion mobility) are covered, reflecting the rapid development and extension of the field. Due to the ongoing developments, the different questions addressed with NTS and manifold techniques in use, NORMAN members feel that no standard operation process can be provided at this stage. However, appropriate analytical methods, data processing techniques and databases commonly compiled in NTS workflows are introduced, their limitations are discussed and recommendations for different cases are provided. Proper quality assurance, quantification without reference standards and reporting results with clear confidence of identification assignment complete the guidance together with a glossary of definitions. The NORMAN community greatly supports the sharing of experiences and data via open science and hopes that this guideline supports this effort.
•The full analytical chain of water screening using LC-HRMS is critically reviewed.•Every step in HRMS-based screening results in data loss on certain compounds/groups.•Data treatment is a nonlinear ...process consisting of a pool of techniques/strategies.•New prioritisation strategies based on chemical or biological activity are possible.•Structure elucidation remains challenging and time-consuming.
The number of chemicals with potential to reach the environment is still largely unknown, which poses great challenges for both environmental scientists and analytical chemists. Liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) is currently the instrumentation of choice for identification of wide-scope polar chemicals of concern (CECs) in water. This review critically evaluates all steps involved in screening for polar CECs in water, including sampling and extraction, analysis by LC-HRMS, data (pre-)treatment, evaluation and reporting. Passive samplers and direct injection, in combination with LC-HRMS, provide new opportunities compared with conventional grab water sampling, as do instrumental advances such as ion-mobility spectrometry coupled to HRMS (IM-HRMS). In this paper, we argue that target, suspect and non-target screening should not be viewed as three separate principles, but rather as conceptual approaches to general data treatment strategies that can be linked together. Due to the large amount of data generated, smart prioritisation strategies are needed, in particular for non-target screening, to reduce complexity and focus on data of high interest. We critically evaluate existing strategies and consider that each prioritisation step will result in data loss (as any other step in a screening study), requiring compromises depending on the research question to be tackled. Many different data treatment strategies have been developed in recent years, but structure elucidation remains a challenging and time-consuming task. We discuss current and potential future trends, e.g. effect-based methods that can be used as future prioritisation tools, technological advances like IM-HRMS and improved software solutions that can enable new data treatment strategies.
An integrated workflow based on liquid chromatography coupled to a quadrupole-time-of-flight mass spectrometer (LC-QTOF-MS) was developed and applied to detect and identify suspect and unknown ...contaminants in Greek wastewater. Tentative identifications were initially based on mass accuracy, isotopic pattern, plausibility of the chromatographic retention time and MS/MS spectral interpretation (comparison with spectral libraries, in silico fragmentation). Moreover, new specific strategies for the identification of metabolites were applied to obtain extra confidence including the comparison of diurnal and/or weekly concentration trends of the metabolite and parent compounds and the complementary use of HILIC. Thirteen of 284 predicted and literature metabolites of selected pharmaceuticals and nicotine were tentatively identified in influent samples from Athens and seven were finally confirmed with reference standards. Thirty four nontarget compounds were tentatively identified, four were also confirmed. The sulfonated surfactant diglycol ether sulfate was identified along with others in the homologous series (SO4C2H4(OC2H4) x OH), which have not been previously reported in wastewater. As many surfactants were originally found as nontargets, these compounds were studied in detail through retrospective analysis.
Display omitted
•New system of IPs taking full advantage of the capabilities of HRMS instruments.•Novel comprehensive HRMS quantitative target method to analyze 2316 micropollutants.•Decision limit ...(CCα) and detection capability (CCβ) introduced in the validation.•398 pollutants were detected and quantified in real wastewater.
This study presents the development and validation of a comprehensive quantitative target methodology for the analysis of 2316 emerging pollutants in water based on Ultra-Performance Liquid Chromatography Quadrupole-Time-Of-Flight Mass Spectrometry (UPLC-Q-ToF-HRMS/MS). Target compounds include pesticides, pharmaceuticals, drugs of abuse, industrial chemicals, doping compounds, surfactants and transformation products, among others. The method was validated for 195 analytes, chosen to be representative of the chemical space of the target list, enabling the assessment of the performance of the method. The method involves a generic sample preparation based on mixed mode solid phase extraction, a UPLC-QTOF-MS/MS screening method using Data Independent Acquisition (DIA) mode, which provides MS and MS/MS spectra simultaneously and an elaborate strong post-acquisition evaluation of the data. The processing method was optimized to provide a successful identification rate >95 % and to minimize the number of false positive results (< 5 %). Decision limit (CCα) and detection capability (CCβ) were also introduced in the validation scheme to provide more realistic metrics on the performance of a HRMS-based wide-scope screening method. A new system of identification points (IPs) based on the one described in the Commission Decision 2002/657/EC was applied to communicate the confidence level in the identification of the analytes. This system considers retention time, mass accuracy, isotopic fit and fragmentation; taking full advantage of the capacities of the HRMS instruments. Finally, 398 contaminants were detected and quantified in real wastewater.
Vinasse, a liquid waste which originates from the production of ethanol fuel from sugarcane, has been widely used as soil amendment in Brazil. An important concern that arises from vinasse reuse is ...the dissemination of antibiotics to the environment through crop soils. This work evaluated the performance of Pressurized Liquid Extraction (PLE) and QuEChERS (quick, easy, cheap, effective, rugged and safe) to extract several multiple-class antibiotics, such as cephalosporins, fluoroquinolones, ionophores, lincosamides, macrolides, quinolones, streptogramin, sulfonamides, tetracyclines and others, from agricultural soils. The performance of several parameters was evaluated for both PLE and QuEChERS, such as the extraction temperature (for PLE), solvents composition, pH and the addition of EDTA. Both methods were able to extract most target antibiotics. However, QuEChERS showed higher recoveries for macrolides and nitroimidazoles, while PLE was more suitable for fluoroquinolones and ionophores (i.e. monensin). The use of citrate-phosphate buffer at pH 7.0, in combination with methanol for PLE and with acetonitrile for QuEChERS, provided the highest antibiotic recoveries for both methods. The use of EDTA did not increase antibiotic recovery rates for QuEChERS, while the temperature had almost no influence on the extraction efficiency in PLE.•Citrate-phosphate buffer at pH 7.0 provided higher antibiotic recoveries for QuEChERS and PLE.•The combination buffer-methanol provided higher recoveries for PLE.•QuEChERS and PLE methods were able to extract most of the target antibiotics.
Display omitted
Dissolved organic matter (DOM) in aquatic systems is a highly heterogeneous mixture of water-soluble organic compounds, acting as a major carbon reservoir driving biogeochemical cycles. Understanding ...DOM molecular composition is thus of vital interest for the health assessment of aquatic ecosystems, yet its characterization poses challenges due to its complex and dynamic chemical profile. Here, we performed a comprehensive chemical analysis of DOM from highly urbanized river and seawater sources and compared it to drinking water. Extensive analyses by nontargeted direct infusion (DI) and liquid chromatography (LC) high-resolution mass spectrometry (HRMS) through Orbitrap were integrated with novel computational workflows to allow molecular- and structural-level characterization of DOM. Across all water samples, over 7000 molecular formulas were calculated using both methods (∼4200 in DI and ∼3600 in LC). While the DI approach was limited to molecular formula calculation, the downstream data processing of MS2 spectral information combining library matching and in silico predictions enabled a comprehensive structural-level characterization of 16% of the molecular space detected by LC-HRMS across all water samples. Both analytical methods proved complementary, covering a broad chemical space that includes more highly polar compounds with DI and more less polar ones with LC. The innovative integration of diverse analytical techniques and computational workflow introduces a robust and largely available framework in the field, providing a widely applicable approach that significantly contributes to understanding the complex molecular composition of DOM.Dissolved organic matter (DOM) in aquatic systems is a highly heterogeneous mixture of water-soluble organic compounds, acting as a major carbon reservoir driving biogeochemical cycles. Understanding DOM molecular composition is thus of vital interest for the health assessment of aquatic ecosystems, yet its characterization poses challenges due to its complex and dynamic chemical profile. Here, we performed a comprehensive chemical analysis of DOM from highly urbanized river and seawater sources and compared it to drinking water. Extensive analyses by nontargeted direct infusion (DI) and liquid chromatography (LC) high-resolution mass spectrometry (HRMS) through Orbitrap were integrated with novel computational workflows to allow molecular- and structural-level characterization of DOM. Across all water samples, over 7000 molecular formulas were calculated using both methods (∼4200 in DI and ∼3600 in LC). While the DI approach was limited to molecular formula calculation, the downstream data processing of MS2 spectral information combining library matching and in silico predictions enabled a comprehensive structural-level characterization of 16% of the molecular space detected by LC-HRMS across all water samples. Both analytical methods proved complementary, covering a broad chemical space that includes more highly polar compounds with DI and more less polar ones with LC. The innovative integration of diverse analytical techniques and computational workflow introduces a robust and largely available framework in the field, providing a widely applicable approach that significantly contributes to understanding the complex molecular composition of DOM.