Abstract
We hereby report a study on confinement and electron loss dynamics in the magnetic trap of an electron cyclotron resonance ion source using a special multi-diagnostic setup that has allowed ...the simultaneous collection of plasma radio-self-emission and x-ray images in the range 500 eV–20 keV. Argon plasmas were generated in single- and two-close-frequency heating (SFH and TCFH) modes. Evidence of turbulent regimes has been found: for stable and unstable configurations quantitative characterizations of the plasma radio self-emission have been carried out, then compared with local measurements of plasma energy content evaluated by x-ray imaging. This imaging method is the only one able to clearly separate x-ray radiation coming from the plasma from that coming from the plasma chamber walls. X-ray imaging has also been supported and benchmarked by volumetric spectroscopy performed via silicon drift and high-purity germanium detectors. The obtained results in terms of x-ray intensity signal coming from the plasma core and from the plasma chamber walls permit the estimation of the average ratio: plasma vs. walls (i.e. plasma losses) as a function of input RF power and pumping wave frequency, showing an evident increase (above the experimental errors) of the intensity in the 2–20 keV energy range due to the plasma losses in the case of unstable plasma. This ratio was well correlated with the strength of the instabilities, in SFH operation mode; in TCFH mode, under specific power balance conditions and frequency combinations, it was possible to damp the instabilities, and thus the plasma losses were observed to decrease and a general reconfiguration of the spatial plasma structure occurred (the x-ray emission was more concentrated in the center of the plasma chamber). Finally, a simplified model was used to simulate electron heating under different pumping frequencies, prompting discussion of the impact of velocity anisotropy vs the onset of the instability, and the mechanism of particle diffusion in the velocity space in stable and unstable regimes.
Experiments have recently demonstrated that kinetic instabilities occurring in magnetoplasma are huge limiting factors to the flux of highly charged ion beams extracted from ECR ion sources. ...Recently, it has been shown that the two-frequency-heating (TFH) mode has the proven potential to mitigate these instabilities. Since the fundamental physical mechanism of TFH is still unclear, a deeper experimental investigation is necessary. At ATOMKI-Debrecen, the effect on the kinetic instabilities of an argon plasma in a 'two-close-frequency heating' scheme has been explored for the first time by using a frequency gap smaller than 1 GHz (i.e. operating in the so-called two-closed-frequency heating mode). A special multi-diagnostics setup has been designed and implemented. In this paper, we will show the data collected by a two-pin, plasma-chamber immersed antenna connected to an RF detector diode and/or to a spectrum analyzer for the detection of plasma radio-self-emission when varying the pumping frequency in single versus double frequency heating mode. Data have been collected simultaneously to the beam extraction and for different frequency gaps and relative power balances. The turbulent regime of the plasma has been tentatively described in a quantitative way, according to the properties of the plasma self-emitted RF spectrum. The measurements show that plasma self-emitted radiation emerges from the internal ECR region everytime (i.e. below the lower pumping frequency) but the almost total instability damping can be effective for some specific combinations of frequency-gap and power balance, thus eventually improving the plasma confinement.
The research of magnetically confined plasmas with high energy content is nowadays an important branch of the plasma physics with several options considering the chosen technics. One of the ways is ...the detection of photons emitted by the plasma itself. A new experimental setup was built in the ECR Laboratory of Atomki (Debrecen, Hungary) to detect in 2D the dense EM-radiation emitted by the ECR-plasma. The main elements of the setup are: an ECR ion source (as plasma source, operating at 13.6–14.6 GHz RF pumping frequency) and a pinhole X-ray camera (operating in the 500 eV–20 keV energy domain). An innovative lead collimator system was designed and built between the plasma and the camera. As a result, it has been possible to acquire X-ray pictures up to 200 W total incident RF-power. This value represents the highest operative RF power for which X-ray imaging has been acquired in the field of ECR Ion Sources and ECR compact traps. A new treatment for the noise reduction was applied to study plasma morphology. The new setup gives opportunity not just to study energetic stable plasmas, but even plasma turbulences and instabilities.
Abstract
A new source for the TANDEM accelerator of LNS has been designed and installed. It is called NESTOR (Noble Elements Source for acceleraTORs) and consists of an ultra-compact ECR microwave ...discharge type ion source 1 operating around 6 GHz and up to 40 W of RF power, provided by a solid state power amplifier, coupled to a Li-Charge Exchange Cell (Li-CEC). It is engineered for the production of a wide range of 1+ and/or 1
-
ion beams from gaseous elements, in particular for noble gases. This work presents the characterization of the primary source and first operations of the whole setup on the HV platform (injector) of the Tandem. The He+ beams have been formerly characterized in terms of current, beam shape (by BaF
2
beam viewers) and emittance (by the three-gradients method). Measurements have been carried out varying pressure, microwave frequency and RF power. Then, the source has been moved to the HV platform, coupled to the Li-CEC for first operations running in gas-exchange mode. Activities are ongoing to optimize beam transport towards the Tandem.
Worldwide efforts to tackle the nature of exotic nuclei comprise the construction of new-generation Radioactive Ion Beam facilities. The Italian community is deeply involved in the process and the ...construction of SPES at Legnaro National Laboratories (INFN) is progressing. This contribution describes the layout of SPES in all its flavours, from Nuclear Physics to Applications in Nuclear Medicine and Neutron Physics. In particular, the status of the SPES-β ISOL facility, together with some of the relevant physics cases and the associated equipment are described.
Abstract
In this paper we present the numerical design and simulation of RF antennas to be employed in Ion Cyclotron Resonance Heating (ICRH) systems working in ECRIS environment. A 3D full-wave ...numerical model, based on the coupling between COMSOL FEM solution of Maxwell equations and the MATLAB-computed non-homogeneous plasma dielectric tensor, has been employed in order to study the performances of several ICRH antennas. Results in terms of S-parameters, on-axis electric field and RF absorbed power inside the plasma chamber have been obtained and compared between the chosen antenna geometries. The presented study will permit to better understand the fundamental aspects of ion dynamics in ECRISs as well as allowing the design of a proper matching network between the RF amplifier and the antenna, necessary to cope with the plasma properties’ fast variations. Further ion kinetic simulations are ongoing.
.
PANDORA, Plasmas for Astrophysics, Nuclear Decays Observation and Radiation for Archaeometry, is planned as a new facility based on a state-of-the-art plasma trap confining energetic plasma for ...performing interdisciplinary research in the fields of Nuclear Astrophysics, Astrophysics, Plasma Physics and Applications in Material Science and Archaeometry: the plasmas become the environment for measuring, for the first time, nuclear decay rates in stellar-like condition (such as
7
Be decay and beta-decay involved in s-process nucleosynthesis), especially as a function of the ionization state of the plasma ions. These studies will give important contributions for addressing several astrophysical issues in both stellar and primordial nucleosynthesis environment (
e.g.
, determination of solar neutrino flux and
7
Li Cosmological Problem), moreover the confined energetic plasma will be a unique light source for high-performance stellar spectroscopy measurements in the visible, UV and X-ray domains, offering advancements in observational astronomy. As to magnetic fields, the experimental validation of theoretical first- and second-order Landé factors will drive the layout of next-generation polarimetric units for the high-resolution spectrograph of the future giant telescopes. In PANDORA new plasma heating methods will be explored, that will push forward the ion beam output, in terms of extracted intensity and charge states. More, advanced and optimized injection methods of ions in an ECR plasma will be experimented, with the aim to optimize its capture efficiency. This will be applied to the ECR-based Charge Breeding technique, that will improve the performances of the SPES ISOL-facility at Laboratori Nazionali di Legnaro-INFN. Finally, PANDORA will be suitable for energy conversion, making the plasma a source of high-intensity electromagnetic radiation, for applications in material science and archaeometry.
Protein adsorption by polymerized surfaces is an interdisciplinary topic that has been approached in many ways, leading to a plethora of theoretical, numerical and experimental insight. There is a ...wide variety of models trying to accurately capture the essence of adsorption and its effect on the conformations of proteins and polymers. However, atomistic simulations are case-specific and computationally demanding. Here, we explore universal aspects of the dynamics of protein adsorption through a coarse-grained (CG) model, that allows us to explore the effects of various design parameters. To this end, we adopt the hydrophobic-polar (HP) model for proteins, place them uniformly at the upper bound of a CG polymer brush whose multibead-spring chains are tethered to a solid implicit wall. We find that the most crucial factor affecting the adsorption efficiency appears to be the polymer grafting density, while the size of the protein and its hydrophobicity ratio come also into play. We discuss the roles of ligands and attractive tethering surfaces to the primary adsorption as well as secondary and ternary adsorption in the presence of attractive (towards the hydrophilic part of the protein) beads along varying spots of the backbone of the polymer chains. The percentage and rate of adsorption, density profiles and the shapes of the proteins, alongside with the respective potential of mean force are recorded to compare the various scenarios during protein adsorption.
PDF
