This groundbreaking and highly anticipated study discusses the scientific fundamentals of resonance macro- and micro-mechanics of petroleum reservoirs and its petroleum industry applications. It ...contains an overview of the research and engineering results of resonance macro- and micro-mechanics of petroleum reservoirs, which provide the scientific and applied foundations for the creation of groundbreaking wave technologies for production stimulation and enhanced oil recovery. A valuable tool for the petroleum or reservoir engineer in the field, this volume is also intended for students, teachers, scientists and practitioners who are interested in the fundamentals, development, and application of leading-edge technologies in the petroleum industry and other industrial sectors.
Abstract
Reducing water consumption in crop irrigation in the world agriculture, studying soil moisture and water consumption by different irrigation methods, improving soil agrophysical properties ...and increasing productivity, as well as increasing the productivity of vegetable crops by various irrigation methods and improving phytosanitary conditions (weed and pest density, disease). Extensive research is being conducted to assess the level of one of the most pressing issues in agriculture is the development, improvement and widespread introduction of cost-effective irrigation methods in the spring and summer planting and care of vegetable crops in conditions of water scarcity.
B-flavor tagging at Belle II Akopov, N.; Banerjee, Sw; Bauer, M. ...
The European physical journal. C, Particles and fields,
04/2022, Letnik:
82, Številka:
4
Journal Article
Recenzirano
Odprti dostop
We report on new flavor tagging algorithms developed to determine the quark-flavor content of bottom (
) mesons at Belle II. The algorithms provide essential inputs for measurements of quark-flavor ...mixing and charge-parity violation. We validate and evaluate the performance of the algorithms using hadronic
decays with flavor-specific final states reconstructed in a data set corresponding to an integrated luminosity of 62.8 fb
-
1
, collected at the
resonance with the Belle II detector at the SuperKEKB collider. We measure the total effective tagging efficiency to be
ε
eff
=
(
30.0
±
1.2
(
stat
)
±
0.4
(
syst
)
)
%
for a category-based algorithm and
ε
eff
=
(
28.8
±
1.2
(
stat
)
±
0.4
(
syst
)
)
%
for a deep-learning-based algorithm.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
We study the processes $e^+e^-\to\omega\chi_{bJ}(1P)$ ($J$ = 0, 1, or 2) using samples at center-of-mass energies $\sqrt{s}$ = 10.701, 10.745, and 10.805 GeV, corresponding to 1.6, 9.8, and 4.7 ...fb$^{-1}$ of integrated luminosity, respectively. These data were collected with the Belle II detector during special operations of the SuperKEKB collider above the $\Upsilon(4S)$ resonance. We report the first observation of $\omega\chi_{bJ}(1P)$ signals at $\sqrt{s}$ = 10.745 GeV. By combining Belle II data with Belle results at $\sqrt{s}$ = 10.867 GeV, we find energy dependencies of the Born cross sections for $e^+e^-\to \omega\chi_{b1,b2}(1P)$ to be consistent with the shape of the $\Upsilon(10753)$ state. These data indicate that the internal structures of the $\Upsilon(10753)$ and $\Upsilon(10860)$ states may differ. Including data at $\sqrt{s}$ = 10.653 GeV, we also search for the bottomonium equivalent of the $X(3872)$ state decaying into $\omega\Upsilon(1S)$. No significant signal is observed for masses between 10.45 and 10.65 GeV/$c^2$.
The Silicon Vertex Detector of the Belle II experiment Zani, L.; Adamczyk, K.; Aggarwal, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
09/2022, Letnik:
1038
Journal Article
Recenzirano
Odprti dostop
Since the start of data taking in spring 2019 at the SuperKEKB collider (KEK, Japan) the Belle II Silicon Vertex Detector (SVD) has been operating reliably and with high efficiency, while providing ...high quality data: high signal-to-noise ratio, greater than 99% hit efficiency, and precise spatial resolution. These attributes, combined with stability over time, result in good tracking efficiency. Currently the occupancy, dominated by beam-background hits, is quite low (about 0.5 % in the innermost layer), causing no problems to the SVD data reconstruction. In view of the operation at higher luminosity foreseen in the next years, specific strategies aiming to preserve the tracking performance have been developed and tested on data. The time stability of the trigger allows reducing sampling of the strip-amplifier waveform. The good hit-time resolution can be exploited to further improve the robustness against the higher level of beam background. First effects of radiation damage on strip noise, sensor currents and depletion voltage have been measured: they do not have any detrimental effect on the performance of the detector. Furthermore, no damage to the SVD is observed after sudden and intense bursts of radiation due to beam losses.
The Silicon Vertex Detector of the Belle II experiment Uematsu, Y.; Adamczyk, K.; Aggarwal, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
06/2022, Letnik:
1033
Journal Article
Recenzirano
Odprti dostop
The Silicon Vertex Detector (SVD) is a part of the vertex detector in the Belle II experiment at the SuperKEKB collider (KEK, Japan). Since the start of data taking in spring 2019, the SVD has been ...operating stably and reliably with a high signal-to-noise ratio and hit efficiency, achieving good spatial resolution and high track reconstruction efficiency. The hit occupancy, which mostly comes from the beam-related background, is currently about 0.5% in the innermost layer, causing no impact on the SVD performance. In anticipation of the operation at higher luminosity in the following years, two strategies to sustain the tracking performance in future high beam background conditions have been developed and tested on data. One is to reduce the number of signal waveform samples to decrease dead time, data size, and occupancy. The other is to utilize the good hit-time resolution to reject the beam background hits. We also measured the radiation effects on the full depletion voltage, sensor current, and strip noise caused during the first two and a half years of operation. The results show no detrimental effect on the SVD performance.
The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 ...and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world’s highest instantaneous luminosity.
In order to provide the best quality track reconstruction with an efficient pattern recognition and track fit, and to correctly propagate the uncertainty on the hit’s position to the track parameters, it is crucial to precisely estimate the resolution of the cluster position measurement. Several methods for estimating the position resolution directly from the data will be discussed.
Simulation of the Belle II silicon vertex detector Kaleta, M.; Adamczyk, K.; Aggarwal, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
06/2022, Letnik:
1032
Journal Article
Recenzirano
Belle II is the next generation B Factory experiment operating at the SuperKEKB accelerator complex at KEK in Tsukuba, Japan. It is expected to collect 50 ab−1 of data, with a target instantaneous ...luminosity of 6.5 × 1035 cm−2s−1, which is about 30 times larger than its predecessor, Belle. In view of the ever increasing Belle II data sample, accurate simulation of the detector is growing in importance. This poses a challenging task of compromising between the realistic modeling of the response of individual detector components and reasonable performance in terms of CPU time of the simulation. In this paper we describe the simulation of the silicon vertex detector, its performance against collision data and optimization.
Performance of the Belle II Silicon Vertex Detector Tanigawa, H.; Adamczyk, K.; Aihara, H. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2020, Letnik:
972
Journal Article
Recenzirano
The Belle II experiment at the SuperKEKB collider of KEK (Japan) started recording physics data in spring 2019 with all its subdetectors installed and with the goal of accumulating 50ab−1 of e+e− ...collision events at the unprecedented instantaneous luminosity of 8×1035cm−2s−1, about 40 times larger than its predecessor. The Belle II vertex detector plays a crucial role in the broad Belle II physics program, especially for time-dependent CP measurements. It consists of two layers of DEPFET-based pixels and four layers of double-sided silicon strip detectors (SVD).
The experience gained from the first period of SVD operation can be summarized as smooth and reliable running of the detector, with high stability of noise levels and calibration parameters obtained from local calibration runs. No major problem has been experienced. The detector even survived a few serious radiation accidents in which the beam was lost due to failure in the machine focusing quadrupoles without any notable damage. The SVD performance were carefully studied with these first physics data. The SVD showed excellent hit and tracking efficiency. Moreover, cluster energy and signal to noise ratio as well as the hit time and spatial resolutions measured on data showed a fair agreement with the expected performance.
•Belle II silicon vertex detector operated during the first year of the experiment.•All sensors worked with stable and excellent hit efficiencies above 99 %.•Signal-to-noise ratios between 15 and 30, cluster time resolution better than 3 ns.•First effects of irradiation visible in leakage currents.
We measure the tau-to-light-lepton ratio of inclusive B-meson branching fractions R(X_{τ/ℓ})≡B(B→Xτν)/B(B→Xℓν), where ℓ indicates an electron or muon, and thereby test the universality of ...charged-current weak interactions. We select events that have one fully reconstructed B meson and a charged lepton candidate from 189 fb^{-1} of electron-positron collision data collected with the Belle II detector. We find R(X_{τ/ℓ})=0.228±0.016(stat)±0.036(syst), in agreement with standard-model expectations. This is the first direct measurement of R(X_{τ/ℓ}).
PDF
