Carbon nanodots are nanometer sized fluorescent particles studied for their distinct photoluminescent properties and biocompatibility. Although extensive literature reports the modification and ...application of carbon nanodot fluorescence, little has been published pertaining to phosphorescence emission from carbon nanodots. The use of phosphors in biological imaging can lead to clearer detection, as the long lifetimes of phosphorescent emission permit off-gated collection that avoids noise from biological autofluorescence. Carbon nanodots present a desirable scaffold for this application, with advantageous qualities ranging from photostability to multi-color emission. This research reports the generation of a novel phosphorescent "heavy carbon" nanodot via halogenation of the carbon nanodot structure. By employing a collection pathway that effectively incorporates bromine into the nanostructure, T1 triplet character is introduced, and subsequently phosphorescence is observed in liquid media at room temperature for the first time in the nanodot literature. Further experiments are reported characterizing the conditions of observed phosphorescence and its pH-dependence. Our approach for producing "heavy carbon nanodots" is a low-cost and relatively simple method for generating the phosphorescent nanodots, which sets the foundation for its potential future use as a phosphorescent probe in application.
In this paper, metal-enhanced fluorescence (MEF) from 6-propionyl-2-dimethylaminonaphthalene (Prodan) in different solvents when placed in close proximity to silver island films (SIFs), ...surface-deposited nanoparticles, is studied. We observe that MEF is wavelength dependent: the enhanced emission of Prodan on SIFs in different solvents changes from 1.5- to 3-fold as compared to a glass control sample containing no silver nanoparticles. Our findings strongly suggest that MEF of Prodan in different solvents is correlated with the scattering portion of the extinction spectrum for metallic particles, i.e., the fluorophore couples and radiates through that scattering mode, which further confirms our laboratories current interpretation of the MEF effect.
The evolving threat of antibiotic resistance development in pathogenic bacteria necessitates the continued cultivation of new technologies and agents to mitigate associated negative health impacts ...globally. It is no surprise that infection prevention and control are cited by the Centers for Disease Control and Prevention (CDC) as two routes for combating this dangerous trend. One technology that has gained great research interest is antimicrobial photodynamic inactivation of bacteria, or APDI. This technique permits controllable activation of antimicrobial effects by combining specific light excitation with the photodynamic properties of a photosensitizer; when activated, the photosensitizer generates reactive oxygen species (ROS) from molecular oxygen
via
either a type I (electron transfer) or type II (energy transfer) pathway. These species subsequently inflict oxidative damage on nearby bacteria, resulting in suppressed growth and cell death. To date, small molecule photosensitizers have been developed, yet the scalability of these as widespread sterilization agents is limited due to complex and costly synthetic procedures. Herein we report the use of brominated carbon nanodots (BrCND) as new photosensitizers for APDI. These combustion byproducts are easily and inexpensively collected; incorporation of bromine into the nanodot permits photosensitization effects that are not inherent to the carbon nanodot structure alone-a consequence of triplet character gained by the heavy atom effect. BrCND demonstrate both type I and type II photosensitization under UV-A irradiation, and furthermore are shown to have significant antimicrobial effects against both Gram-negative
Escherichia coli
and Gram-positive
Staphylococcus aureus
and
Listeria monocytogenes
as well. A mechanism of "dark" toxicity is additionally reported; the pH-triggered release of reactive nitrogen species is detected from a carbon nanodot structure for the first time. The results described present the BrCND structure as a competitive new antimicrobial agent for controllable sterilization of bacteria.
Light-responsive antimicrobial activity is achieved from tuning carbon nanodot structures
via
bromination, a direct result of the heavy atom effect.
Explains the principles and current thinking behind plasmon enhanced Fluorescence Describes the current developments in Surface Plasmon Enhanced, Coupled and Controlled Fluorescence Details methods ...used to understand solar energy conversion, detect and quantify DNA more quickly and accurately, and enhance the timeliness and accuracy of digital immunoassays Contains contributions by the world's leading scientists in the area of fluorescence and plasmonics Describes detailed experimental procedures for developing both surfaces and nanoparticles for applications in metal-enhanced fluorescence
Nucleases are enzymes that can degrade genomic DNA and RNA that decrease the accuracy of quantitative measures of those nucleic acids. Here, we study conventional heating, standard microwave ...irradiation, and Lyse-It, a microwave-based lysing technology, for the potential to fragment and inactivate DNA and RNA endonucleases. Lyse-It employs the use of highly focused microwave irradiation to the sample ultimately fragmenting and inactivating RNase A, RNase B, and DNase I. Nuclease size and fragmentation were determined visually and quantitatively by SDS polyacrylamide gel electrophoresis and the mini-gel Agilent 2100 Bioanalyzer system, with a weighted size calculated to depict the wide range of nuclease fragmentation. Enzyme activity assays were conducted, and the rates were calculated to determine the effect of various lysing conditions on each of the nucleases. The results shown in this paper clearly demonstrate that Lyse-It is a rapid and highly efficient way to degrade and inactivate nucleases so that nucleic acids can be retained for down-stream detection.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
A simple and rapid wet-chemical technique for the deposition of silver triangles on conventional glass substrates, which alleviates the need for lithography, has been developed. The technique is ...based on the seed-mediated cetyltrimethylammonium-bromide-directed growth of silver triangles on glass surfaces, where smaller spherical silver seeds that were attached to the surface were subsequently converted and grown into silver triangles in the presence of a cationic surfactant and silver ions. The size of the silver triangles was controlled by sequential immersion of silver seed-coated glass substrates into a growth solution and by the duration time of immersion. Atomic force microscopy studies revealed that the size of the silver triangles ranged between 100 and 500 nm. Interestingly, these new surfaces are a significant improvement over traditional silver island films for applications in metal-enhanced fluorescence. A routine 16-fold enhancement in emission intensity was typically observed, for protein-immobilized indocyanine green, with a relatively very low loading density of silver triangles on the glass surface.
The ability for safe and rapid pathogenic sample transportation and subsequent detection is an increasing challenge throughout the world. Herein, we describe and use bead-beating, vortex, sonication, ...903 protein saver cards, and Lyse-It methods, aiming to inactivate Gram-positive and -negative bacteria with subsequent genome DNA (quantitative Polymerase Chain Reaction) qPCR detection. The basic concepts behind the four chosen technologies is their versatility, cost, and ease of use in developed and underdeveloped countries. The four methods target the testing of bacterial resilience, cellular extraction from general and complex media and subsequent DNA extraction for qPCR detection and amplification. These results demonstrate that conventional high temperature heating, 903 protein saver cards, and Lyse-It are all viable options for inactivating bacterial growth for safe shipping. Additionally, Lyse-It was found to be particularly useful as this technology can inactivate bacteria, extract cells from 903 protein saver cards, lyse bacterial cells, and additionally keep genomic DNA viable for qPCR detection.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Distance dependent singlet and triplet metal-enhanced emission of eosin from silica coated silver island films (SiFs) has been studied by steady-state and time resolved fluorescence techniques, along ...with theoretical finite difference time domain (FDTD) numerical simulations, to understand how the thickness of the dielectric coating surrounding silver nanoparticles fundamentally affects luminescence enhancement. Our findings suggest that the distance dependence of metal-enhanced phenomena such as fluorescence, phosphorescence and delayed fluorescence is underpinned by the decay of the electric near-field, and depending on the actual silver silica sample embodiment, one can see either decreased or enhanced luminescence. These results not only expand our current MEF thinking but also suggest that one may well be able to approximate plasmon-enhanced luminescence values.
Distance dependent singlet and triplet metal-enhanced emission from eosin on silica coated silver island films has been studied by steady-state, time resolved, and numerical FDTD techniques.
Two methods have been considered for the deposition of silver nanorods onto conventional glass substrates. In the first method, silver nanorods were deposited onto ...3-(aminopropyl)triethoxysilane-coated glass substrates simply by immersing the substrates into the silver nanorod solution. In the second method, spherical silver seeds that were chemically attached to the surface were subsequently converted and grown into silver nanorods in the presence of a cationic surfactant and silver ions. The size of the silver nanorods was controlled by sequential immersion of silver seed-coated glass substrates into a growth solution and by the duration of immersion, ranging from tens of nanometers to a few micrometers. Atomic force microscopy and optical density measurements were used to characterize the silver nanorods deposited onto the surface of the glass substrates. The application of these new surfaces is for metal-enhanced fluorescence (MEF), whereby the close proximity of silver nanostructures can alter the radiative decay rate of fluorophores, producing enhanced signal intensities and an increased fluorophore photostability. In this paper, it is indeed shown that irregularly shaped silver nanorod-coated surfaces are much better MEF surfaces as compared to traditional silver island or colloid films. Subsequently, these new silver nanorod preparation procedures are likely to find a common place in MEF, as they are a quicker and much cheaper alternative as compared to surfaces fabricated by traditional nanolithographic techniques.