In this paper, we study and predict flow observables in 2.76 and 5.02 A TeV Pb + Pb collisions, using the iEBE-VISHNU hybrid model with TRENTo and AMPT initial conditions and with different forms of ...the QGP transport coefficients. With properly chosen and tuned parameter sets, our model calculations can nicely describe various flow observables in 2.76 A TeV Pb + Pb collisions, as well as the measured flow harmonics of all charged hadrons in 5.02 A TeV Pb + Pb collisions. We also predict other flow observables, including
v
n
(
p
T
)
of identified particles, event-by-event
v
n
distributions, event-plane correlations, (normalized) symmetric cumulants, non-linear response coefficients and
p
T
-dependent factorization ratios, in 5.02 A TeV Pb + Pb collisions. We find many of these observables to remain approximately the same values as the ones in 2.76 A TeV Pb + Pb collisions. Our theoretical studies and predictions could shed light to the experimental investigations in the near future.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Covalent organic frameworks (COF) possess a robust and porous crystalline structure, making them an appealing candidate for energy storage. Herein, we report an exfoliated polyimide COF composite ...(P‐COF@SWCNT) prepared by an in situ condensation of anhydride and amine on the single‐walled carbon nanotubes as advanced anode for potassium‐ion batteries (PIBs). Numerous active sites exposed on the exfoliated frameworks and the various open pathways promote the highly efficient ion diffusion in the P‐COF@SWCNT while preventing irreversible dissolution in the electrolyte. During the charging/discharging process, K+ is engaged in the carbonyls of imide group and naphthalene rings through the enolization and π‐K+ effect, which is demonstrated by the DFT calculation and XPS, ex‐situ FTIR, Raman. As a result, the prepared P‐COF@SWCNT anode enables an incredibly high reversible specific capacity of 438 mA h g−1 at 0.05 A g−1 and extended stability. The structural advantage of P‐COF@SWCNT enables more insights into the design and versatility of COF as an electrode.
We prepare a polyimide covalent organic framework composite anode by effective in‐situ condensation of anhydride and amine on the surface of single‐walled carbon nanotubes. The construction of the conductive network accelerates the transport of electron. Dual electroactive sites in the framework, carbonyls and aromatic naphthalene rings, could store more potassium ions by the enolization and π‐K+ effect.
Although ether‐based electrolytes have been extensively applied in anode evaluation of batteries, anodic instability arising from solvent oxidability is always a tremendous obstacle to matching with ...high‐voltage cathodes. Herein, by rational design for solvation configuration, the fully coordinated ether‐based electrolyte with strong resistance against oxidation is reported, which remains anodically stable with high‐voltage Na3V2(PO4)2O2F (NVPF) cathode under 4.5 V (versus Na+/Na) protected by an effective interphase. The assembled graphite//NVPF full cells display superior rate performance and unprecedented cycling stability. Beyond that, the constructed full cells coupling the high‐voltage NVPF cathode with hard carbon anode exhibit outstanding electrochemical performances in terms of high average output voltage up to 3.72 V, long‐term cycle life (such as 95 % capacity retention after 700 cycles) and high energy density (247 Wh kg−1). In short, the optimized ether‐based electrolyte enriches systematic options, the ability to maintain oxidative stability and compatibility with various anodes, exhibiting attractive prospects for application.
By rational design of the solvation configuration, a cation–solvent fully coordinated ether‐based electrolyte with strong oxidation resistance up to 4.5 V (versus Na+/Na) was developed and applied in graphite//NVPF and LHC//NVPF full cells which showed superior rate performance and unprecedented cycling stability.
Hard carbon is regarded as a promising anode material for sodium‐ion batteries (SIBs). However, it usually suffers from the issues of low initial Coulombic efficiency (ICE) and poor rate performance, ...severely hindering its practical application. Herein, a flexible, self‐supporting, and scalable hard carbon paper (HCP) derived from scalable and renewable tissue is rationally designed and prepared as practical additive‐free anode for room/low‐temperature SIBs with high ICE. In ether electrolyte, such HCP achieves an ICE of up to 91.2% with superior high‐rate capability, ultralong cycle life (e.g., 93% capacity retention over 1000 cycles at 200 mA g−1) and outstanding low‐temperature performance. Working mechanism analyses reveal that the plateau region is the rate‐determining step for HCP with a lower electrochemical reaction kinetics, which can be significantly improved in ether electrolyte.
A self‐supporting, flexible, additive‐free and scalable hard carbon paper (HCP) derived from tissue is rationally developed, and it achieves outstanding Na‐storage properties in terms of high initial Coulombic efficiency (91.2%), superior high‐rate capability, ultralong cyclic stability, as well as outstanding low‐T performance in ether electrolyte. More significantly, the Na‐storage and capacity attenuation mechanism of the HCP anode is revealed.
Impossible voltage plateau regulation for the cathode materials with fixed active elemental center is a pressing issue hindering the development of Na‐superionic‐conductor (NASICON)‐type ...Na3V2(PO4)2F3 (NVPF) cathodes in sodium‐ion batteries (SIBs). Herein, a high‐entropy substitution strategy, to alter the detailed crystal structure of NVPF without changing the central active V atom, is pioneeringly utilized, achieving simultaneous electronic conductivity enhancement and diffusion barrier reduction for Na+, according to theoretical calculations. The as‐prepared carbon‐free high‐entropy Na3V1.9(Ca,Mg,Al,Cr,Mn)0.1(PO4)2F3 (HE‐NVPF) cathode can deliver higher mean voltage of 3.81 V and more advantageous energy density up to 445.5 Wh kg−1, which is attributed by the diverse transition‐metal elemental substitution in high‐entropy crystalline. More importantly, high‐entropy introduction can help realize disordered rearrangement of Na+ at Na(2) active sites, thereby to refrain from unfavorable discharging behaviors at low‐voltage region, further lifting up the mean working voltage to realize a full Na‐ion storage at the high voltage plateau. Coupling with a hard carbon (HC) anode, HE‐NVPF//HC SIB full cells can deliver high specific energy density of 326.8 Wh kg−1 at 5 C with the power density of 2178.9 W kg−1. This route means the unlikely potential regulation in NASICON‐type crystal with unchangeable active center becomes possible, inspiring new ideas on elevating the mean working voltage for SIB cathodes.
A high‐entropy effect is delicately introduced into fluorophosphate cathode for sodium‐ion batteries by in situ partial substitution of active V central atom, preparing a high‐entropy carbon‐free Na3V1.9(Ca,Mg,Al,Cr,Mn)0.1(PO4)2F3 cathode, suppressing the occurrence of detrimental phase transition process in the low‐voltage region, and further lifting up the mean working voltage of pristine Na3V2(PO4)2F3, enhancing sodium storage behavior, rate capability, and cycle performance.
The graphite material from exhausted Li-ion batteries (LIBs) is reused as a favorable anode for Na-ion batteries (NIBs) and K-ion batteries (KIBs) through a recycling treatment. The optimized ...electrode delivers improved electrochemical performance, such as 162 mA h g −1 in NIBs at 0.2 A g −1 and 320 mA h g −1 in KIBs at 0.05 A g −1 . In addition, the insights into Na/K-ion de-/intercalation model evolution and corresponding electrochemical analysis are conducted through in operando X-ray diffraction and a series of other characterization methods, discovering a visible transitional stage for NIBs and an irreversible initial cycle phase transformation for KIBs. In a word, we not only provide a new recycling concept for waste graphite anodes but also carry out a series of significant intercalation mechanism studies, which contribute to anode recycling and shed light on the development of graphite material for promising alternative ion batteries.
It has been known that, the novel coronavirus, 2019-nCoV, which is considered similar to SARS-CoV, invades human cells via the receptor angiotensin converting enzyme II (ACE2). Moreover, lung cells ...that have ACE2 expression may be the main target cells during 2019-nCoV infection. However, some patients also exhibit non-respiratory symptoms, such as kidney failure, implying that 2019-nCoV could also invade other organs. To construct a risk map of different human organs, we analyzed the single-cell RNA sequencing (scRNA-seq) datasets derived from major human physiological systems, including the respiratory, cardiovascular, digestive, and urinary systems. Through scRNA-seq data analyses, we identified the organs at risk, such as lung, heart, esophagus, kidney, bladder, and ileum, and located specific cell types (i.e., type II alveolar cells (AT2), myocardial cells, proximal tubule cells of the kidney, ileum and esophagus epithelial cells, and bladder urothelial cells), which are vulnerable to 2019-nCoV infection. Based on the findings, we constructed a risk map indicating the vulnerability of different organs to 2019-nCoV infection. This study may provide potential clues for further investigation of the pathogenesis and route of 2019-nCoV infection.
Dual‐ion batteries (DIBs) are a viable option for large‐scale energy storage owing to their high energy density, low cost, and environmental friendliness. However, interfacial instability at both the ...cathode and anode in Li‐graphite DIBs (LG‐DIBs) contributes to poor cycling performance and failed energy storage, severely limiting their application potentials. Herein, a two‐pronged strategy is used to improve the interfacial stability, synergistically stabilizing the graphite cathode by applying a rigid/inert surface coating while building a 3D framework on the lithium anode. The resultant LG‐DIBs are ultrastable and achieve a long cycle life (capacity retention of 80% after 2700 cycles at 200 mA−1) in the all‐climate temperature range from −25 to 40 °C. Ex situ characterization reveals that the cathode–electrolyte interphase on graphite is stabilized by suppressing the electrolyte decomposition and reducing graphite exfoliation. Simultaneously, the framework constructed on the lithium anode induces uniform and dendrite‐free Li deposition owing to its 3D structure. This study not only contributes to the development of practical LG‐DIBs but also points out a promising research direction for other new types of batteries.
A two‐pronged approach is adopted to modify and strengthen the anode electrolyte interphase and cathode electrolyte interphase synergistically in Li‐graphite dual‐ion batteries. The battery life is significantly enhanced in all climates from −25 to 40 °C by inducing homogeneous Li deposition and suppressing successive decomposition of the electrolyte on the graphite cathode.
The effects of volume corrections and resonance decays (the resulting correlations between positive charges and negative charges) on cumulants of net-proton distributions and net-charge distributions ...are investigated by using a Monte Carlo hadron resonance gas (MCHRG) model. The required volume distributions are generated by a Monte Carlo Glauber (MC-Glb) model. Except the variances of net-charge distributions, the MCHRG model with more realistic simulations of volume corrections, resonance decays and acceptance cuts can reasonably explain the data of cumulants of net-proton distributions and net-charge distributions reported by the STAR collaboration. The MCHRG calculations indicate that both the volume corrections and resonance decays make the cumulant products of net-charge distributions deviate from the Skellam expectations: the deviations of Sσ and κσ2 are dominated by the former effect while the deviations of ω are dominated by the latter one.
The effects of neutron skin on the multiplicity (Nch) and eccentricity (ϵ2) in relativistic 4496Ru+4496Ru and 4096Zr+4096Zr collisions at sNN=200 GeV are investigated with the Trento model. It is ...found that the Ru+Ru/Zr+Zr ratios of the Nch distributions and ϵ2 in mid-central collisions are exquisitely sensitive to the neutron skin type (skin vs. halo). The state-of-the-art calculations by energy density functional theory (DFT) favor the halo-type neutron skin and can soon be confronted by experimental data. It is demonstrated that the halo-type density can serve as a good surrogate for the DFT density, and thus can be efficiently employed to probe nuclear deformities by using elliptic flow data in central collisions. We provide hereby a proof-of-principle venue to simultaneously determine the neutron skin type, thickness, and nuclear deformity.
PDF
