Changes of surface gravity on Earth are of great interest in geodesy, earth sciences and natural resource exploration. They are indicative of Earth system's mass redistributions and vertical surface ...motion, and are usually measured with falling corner-cube- and superconducting gravimeters (FCCG and SCG). Here we report on absolute gravity measurements with a mobile quantum gravimeter based on atom interferometry. The measurements were conducted in Germany and Sweden over periods of several days with simultaneous SCG and FCCG comparisons. They show the best-reported performance of mobile atomic gravimeters to date with an accuracy of 39nm s2, long-term stability of 0.5nm s2 and short-term noise of 96nm s2 √Hz. These measurements highlight the unique properties of atomic sensors. The achieved level of performance in a transportable instrument enables new applications in geodesy and related fields, such as continuous absolute gravity monitoring with a single instrument under rough environmental conditions.
Atom interferometers have a multitude of proposed applications in space including precise measurements of the Earth’s gravitational field, in navigation & ranging, and in fundamental physics such as ...tests of the weak equivalence principle (WEP) and gravitational wave detection. While atom interferometers are realized routinely in ground-based laboratories, current efforts aim at the development of a space compatible design optimized with respect to dimensions, weight, power consumption, mechanical robustness and radiation hardness. In this paper, we present a design of a high-sensitivity differential dual species
85
Rb/
87
Rb atom interferometer for space, including physics package, laser system, electronics and software. The physics package comprises the atom source consisting of dispensers and a 2D magneto-optical trap (MOT), the science chamber with a 3D-MOT, a magnetic trap based on an atom chip and an optical dipole trap (ODT) used for Bose-Einstein condensate (BEC) creation and interferometry, the detection unit, the vacuum system for 10
−11
mbar ultra-high vacuum generation, and the high-suppression factor magnetic shielding as well as the thermal control system. The laser system is based on a hybrid approach using fiber-based telecom components and high-power laser diode technology and includes all laser sources for 2D-MOT, 3D-MOT, ODT, interferometry and detection. Manipulation and switching of the laser beams is carried out on an optical bench using Zerodur bonding technology. The instrument consists of 9 units with an overall mass of 221 kg, an average power consumption of 608 W (814 W peak), and a volume of 470 liters which would well fit on a satellite to be launched with a Soyuz rocket, as system studies have shown.
Atom interferometry represents a quantum leap in the technology for the ultra-precise monitoring of accelerations and rotations and, therefore, for the science that relies on these quantities. These ...sensors evolved from a new kind of optics based on matter-waves rather than light-waves and might result in an advancement of the fundamental detection limits by several orders of magnitude. This paper describes the current status of the Space Atom Interferometer project (SAI), funded by the European Space Agency. In a multi-pronged approach, SAI aims to investigate both experimentally and theoretically the various aspects of placing atom interferometers in space: the equipment needs, the realistically expected performance limits and potential scientific applications in a micro-gravity environment considering all aspects of quantum, relativistic and metrological sciences. A drop-tower compatible atom interferometry acceleration sensor prototype has been designed, and the manufacturing of its subsystems has been started. A compact modular laser system for cooling and trapping rubidium atoms has been assembled. A compact Raman laser module, featuring outstandingly low phase noise, has been realized. Possible schemes to implement coherent atomic sources in the atom interferometer have been experimentally demonstrated.
This paper presents the current status and future prospects of the Space Atom Interferometer project (SAI), funded by the European Space Agency. Atom interferometry provides extremely sensitive and ...accurate tools for the measurement of inertial forces. Operation of atom interferometers in microgravity is expected to enhance the performance of such sensors. Main goal of SAI is to demonstrate the possibility of placing atom interferometers in space. The resulting drop-tower compatible atom interferometry acceleration sensor prototype is described. Expected performance limits and potential scientific applications in a micro-gravity environment are also discussed.
Atom Interferometrie ist eine sehr genaue und sensitive Methode mit einer Vielzahl von Anwendungsmöglichkeiten, zu der auch die Messung der Erdbeschleunigung zählt. Während die meisten Atom ...Interferometer aus großen, ortsfesten Aufbauten bestehen, werden auf diesem Gebiet häufig mobile Messgeräte benötigt. Das Gravimetric Atom Interferometer (GAIN) Projekt wurde ins Leben gerufen, um dieser zusätzlichen Anforderung bei bestmöglicher Messgenauigkeit gerecht zu werden. Es soll eine Alternative zu anderen modernsten Gravimetertypen geschaffen werden, die wichtige funktionale Eigenschaften wie eine hohe Auflösung und absolute Genauigkeit in einem Gerät vereint. Der GAIN Sensor verwendet lasergekühlte Rb87 Atome in einer 1 m hohen Fontäne. Mit Hilfe von stimulierten Raman Übergängen wird ein beschleunigungssensitives Interferometer realisiert. In dieser Arbeit wurde der Sensor mit Blick auf mobile und driftfreie Langzeitmessungen weiterentwickelt. Dafür wurden einzelne Subsysteme des Laseraufbaus auf die daraus resultierenden Anforderungen hin angepasst oder neu entwickelt. Mit derselben Zielstellung wurden weiterhin systematische Effekte in dem Messaufbau untersucht und Maßnahmen für ihre Reduzierung realisiert. Der Aufbau wurde transportiert und in relevanten Umgebungen getestet. Dabei konnte gezeigt werden, dass die Leistungsfäigkeit dieses Aufbaus mit denen der wichtigsten und modernsten Gravimeter konkurieren kann, sie teilweise übertrifft und dass dieser Sensor zur präzisen Kalibrierung der relativen Gravimeter verwendet werden kann. In den Messungen wurde eine Sensitivität von 138 nm/s^2/Sqrt(Hz) sowie eine Langzeitstabilität von 5 x 10^−11 g über 10^5 s erreicht.
Atom interferometry offers a very precise and sensitive measurement tool for various areas of application whereof one is the registration of the gravity acceleration. While the vast majority of atom interferometers include large and stationary setups, this field very often implies the additional request for a mobile apparatus. The Gravimetric Atom Interferometer (GAIN) project has been started to meet this requirement and to provide best possible accuracy at the same time. It aims to realize an alternative to other types of gravimeters and to combine important qualities such as high sensitivity and absolute accuracy in one instrument. The GAIN sensor is based on laser-cooled Rb87 atoms in a 1 m atomic fountain. Stimulated Raman transitions form a Mach-Zehnder type interferometer which is sensitive to accelerations. In this work it has been advanced to meet all requirements for mobile and drift-free long-term operation. Therefore, selected parts of the laser system have been improved or redeveloped. A second focus has been on systematic effects for the same objective. They have been analyzed and measures for their suppression have been undertaken. The apparatus has been transported, tested in relevant environments, and compared to the most important state-of-the-art gravimeter types where a competitive performance has been achieved. It is demonstrated, that the gravity signal of this sensor allows for a precise calibration of the relative gravimeter types. During the measurements a best sensitivity of 138 nm/s^2/Sqrt(Hz) and a stability of 5 x 10^−11 g after 10^5 s has been reached.
Atom interferometry represents a quantum leap in the technology for the ultra-precise monitoring of accelerations and rotations and, therefore, for all the science that relies on the latter ...quantities. These sensors evolved from a new kind of optics based on matter-waves rather than light-waves and might result in an advancement of the fundamental detection limits by several orders of magnitude. Matter-wave optics is still a young, but rapidly progressing science. The Space Atom Interferometer project (SAI), funded by the European Space Agency, in a multi-pronged approach aims to investigate both experimentally and theoretically the various aspects of placing atom interferometers in space: the equipment needs, the realistically expected performance limits and potential scientific applications in a micro-gravity environment considering all aspects of quantum, relativistic and metrological sciences. A drop-tower compatible prototype of a single-axis atom interferometry accelerometer is under construction. At the same time the team is studying new schemes, e.g. based on degenerate quantum gases as source for the interferometer. A drop-tower compatible atom interferometry acceleration sensor prototype has been designed, and the manufacturing of its subsystems has been started. A compact modular laser system for cooling and trapping rubidium atoms has been assembled. A compact Raman laser module, featuring outstandingly low phase noise, has been realized. Possible schemes to implement coherent atomic sources in the atom interferometer have been experimentally demonstrated.
Wavefront aberrations are one of the largest uncertainty factors in present atom interferometers. We present a detailed numerical and experimental analysis of this effect based on measured ...aberrations from optical windows. By placing windows into the Raman beam path of our atomic gravimeter, we verify for the first time the induced bias in very good agreement with theory. Our method can be used to reduce the uncertainty in atomic gravimeters by one order of magnitude resulting in an error of less than \(3\times 10^{-10}\,g\) and it is suitable in a wide variety of atom interferometers with thermal or ultra cold atoms. We discuss the limitations of our method, potential improvements and its role in future generation experiments.
Changes of surface gravity on Earth are of great interest in geodesy, earth sciences and natural resource exploration. They are indicative of Earth system's mass redistributions and vertical surface ...motion, and are usually measured with falling corner-cube- and superconducting gravimeters (FCCG and SCG). Here we report on absolute gravity measurements with a mobile quantum gravimeter based on atom interferometry. The measurements were conducted in Germany and Sweden over periods of several days with simultaneous SCG and FCCG comparisons. They show the best-reported performance of mobile atomic gravimeters to date with an accuracy of \(\mathrm{39\,nm/s^2}\) and long-term stability of \(\mathrm{0.5\,nm/s^2}\) short-term noise of \(96\,\mathrm{nm/s^2/\sqrt{Hz}}\). These measurements highlight the unique properties of atomic sensors. The achieved level of performance in a transportable instrument enables new applications in geodesy and related fields, such as continuous absolute gravity monitoring with a single instrument under rough environmental conditions.
Provider: - Institution: - Data provided by Europeana Collections- Berlin, Humboldt Universität zu Berlin, Diss., 2015- All metadata published by Europeana are available free of restriction under the ...Creative Commons CC0 1.0 Universal Public Domain Dedication. However, Europeana requests that you actively acknowledge and give attribution to all metadata sources including Europeana