The filter media in biofiltration systems play an important role in removing potentially harmful pollutants from urban stormwater runoff. This study compares the heavy metal removal potential (Cu, ...Zn, Cd, Pb) of five materials (potting soil, compost, coconut coir, sludge and a commercial mix) using laboratory columns. Total/dissolved organic carbon (TOC/DOC) was also analysed because some of the test materials had high carbon content which affects heavy metal uptake/release. Potting soil and the commercial mix offered the best metal uptake when dosed with low (Cu: 44.78 μg/L, Zn: 436.4 μg/L, Cd, 1.82 μg/L, Pb: 51.32 μg/L) and high concentrations of heavy metals (Cu: 241 μg/L, Zn: 1127 μg/L, Cd: 4.57 μg/L, Pb: 90.25 μg/L). Compost and sludge also had high removal efficiencies (>90%). Heavy metal leaching from these materials was negligible. A one-month dry period between dosing experiments did not affect metal removal efficiencies. TOC concentrations from all materials increased after the dry period. Heavy metal removal was not affected by filter media depth (600 mm vs. 300 mm). Heavy metals tended to accumulate at the upper 5 cm of the filter media although potting soil showed bottom-enriched concentrations. We recommend using potting soil as the principal media mixed with compost or sludge since these materials perform well and are readily available. The use of renewable materials commonly found in Singapore supports a sustainable approach to urban water management.
•Heavy metal removal by soil, compost, coconut, sludge and commercial mix was tested.•The heavy metals included Cu, Zn, Cd and Pb.•Soil and commercial mix had the highest metal uptake out of the five materials.•The depth of the material did not affect heavy metal removal.•Most of the heavy metals accumulated in the top 5 cm of the materials tested.
The origin of enhanced superconductivity over 50 K in the recently discovered FeSe monolayer films grown on SrTiO
(STO), as compared to 8 K in bulk FeSe, is intensely debated. As with the ...ferrochalcogenides A
Fe
Se
and potassium-doped FeSe, which also have a relatively high-superconducting critical temperature (T
), the Fermi surface (FS) of the FeSe/STO monolayer films is free of hole-like FS, suggesting that a Lifshitz transition by which these hole FSs vanish may help increasing T
. However, the fundamental reasons explaining this increase of T
remain unclear. Here we report a 15 K jump of T
accompanying a second Lifshitz transition characterized by the emergence of an electron pocket at the Brillouin zone centre, which is triggered by high-electron doping following in situ deposition of potassium on FeSe/STO monolayer films. Our results suggest that the pairing interactions are orbital dependent in generating enhanced superconductivity in FeSe.
•Three categories of FBR-Fenton processes for industrial wastewater treatment.•Factors to enhance organics removal and iron crystallization efficiency are reviewed.•Technology upscaling of ...FBR-Fenton-like processes is challenging.•Strategies to tackle technical limitations and enhance process cost-effectiveness.
In recent years, fluidized-bed Fenton (FBR-Fenton) process has gained more attention in treating recalcitrant industrial wastewater. FBR-Fenton combines the effectiveness of homogeneous Fenton and sludge reduction of heterogeneous Fenton. Comparing to other modified Fenton processes, FBR-Fenton has greater economical and scaling up potential. However, large consumption of Fenton reagents and strict pH control are still the bottlenecks hampering the full-scale application of FBR-Fenton. While prior reviews mainly focused on the operation and performance of FBR-Fenton process, the present study critically discussed the challenges and bottlenecks for its full-scale industrial application. This study also comprehensively reviewed the development strategies for tackling these drawbacks, mainly over the recent five years. Homogeneous FBR-Fenton, heterogeneous FBR-Fenton and heterogeneous FBR-photo-Fenton processes were classified for the first time according to their reaction mechanisms and system designs. Important operational and design parameters affecting the cost-effectiveness of all FBR-Fenton technologies were reviewed, including the fundamentals, common practices and even innovative steps for enhancing the process performance. Up-to-date applications of FBR-Fenton technologies in recalcitrant wastewater/compounds treatment were also summarized, and it was found that upscaling of heterogeneous FBR-Fenton and heterogeneous FBR-photo-Fenton processes was still very challenging. Strategies to overcome the key technical limitations and enhance process cost-effectiveness were discussed in the future perspective part. Furthermore, modelling techniques such as computational fluid dynamics model and artificial neural network were suggested to be promising modelling techniques for speeding up the full-scale applications of FBR-Fenton technologies.
Display omitted
Three dimensional (3D) ultrasounds with 20 kHz frequency and 14–22 μm amplitudes were applied to the solidification process of Mg97.7Y1.4Al0.9 alloy. With the increase of ultrasonic dimension and ...amplitude, both the primary Al2Y particles and the principal α-Mg phase were significantly refined in combination with an increased proportion of Al2Y/α-Mg parallel growth interfaces, while the eutectic Al2Y phase changed from long strip to fine granular shape. The dynamic solidification mechanism was further explained on the basis of in-situ acoustic spectrum measurements. It was found that once tiny primary Al2Y and α-Mg nuclei formed, they immediately strengthened acoustic field by facilitating bubble formation at their solid/liquid interfaces, and the subsequent bubble oscillation and collapsing in turn promoted their further nucleation by improving wettability and increasing local undercooling. The ultrasonically solidified alloy showed superior mechanical performances as compared with static solidification structures. The maximum tensile strength and plasticity achieved 271 MPa and 12.8% which were 1.41 and 1.36 times higher than static values, and the high temperature creep properties were enhanced as well.
ABSTRACT
We present results from the search for a stochastic gravitational-wave background (GWB) as predicted by the theory of General Relativity using six radio millisecond pulsars from the Data ...Release 2 (DR2) of the European Pulsar Timing Array (EPTA) covering a timespan up to 24 yr. A GWB manifests itself as a long-term low-frequency stochastic signal common to all pulsars, a common red signal (CRS), with the characteristic Hellings-Downs (HD) spatial correlation. Our analysis is performed with two independent pipelines, ENTERPRISE, and TEMPONEST+FORTYTWO, which produce consistent results. A search for a CRS with simultaneous estimation of its spatial correlations yields spectral properties compatible with theoretical GWB predictions, but does not result in the required measurement of the HD correlation, as required for GWB detection. Further Bayesian model comparison between different types of CRSs, including a GWB, finds the most favoured model to be the common uncorrelated red noise described by a power law with $A = 5.13_{-2.73}^{+4.20} \times 10^{-15}$ and $\gamma = 3.78_{-0.59}^{+0.69}$ (95 per cent credible regions). Fixing the spectral index to γ = 13/3 as expected from the GWB by circular, inspiralling supermassive black hole binaries results in an amplitude of $A =2.95_{-0.72}^{+0.89} \times 10^{-15}$. We implement three different models, BAYESEPHEM, LINIMOSS, and EPHEMGP, to address possible Solar system ephemeris (SSE) systematics and conclude that our results may only marginally depend on these effects. This work builds on the methods and models from the studies on the EPTA DR1. We show that under the same analysis framework the results remain consistent after the data set extension.
Fluidized bed reactor Fenton (FBR-Fenton) process was adopted for reverse osmosis concentrate (ROC) treatment with three types of carriers, including sand, zeolite and granular activated carbon ...(GAC). Adsorption studies demonstrated that GAC achieved the best adsorption performance (maximum COD removal of 78% in 15 h) among the three carriers, and the adsorption of ROC organic matters followed a two-stage adsorption model. Fenton oxidations were carried out in three fluidized beds after column saturation, and FBR-Fenton/GAC process achieved highest COD removal (72%) and most BOD5/COD ratio enhancement (from 0.03 to 0.3) in ROC. Long-term operation data demonstrated good performance stability of GAC as the carrier. In addition, GAC fluidized bed obtained highest total iron removal rate via iron crystallization process. Continuous in-situ GAC regeneration with more than 90% recoveries of surface area, pore volume and adsorption capacity were observed along the ROC treatment with FBR-Fenton/GAC process. Mechanism studies revealed that better COD removal performance in FBR-Fenton/GAC process was attributed to the combining effects of homogenous Fenton reaction, GAC adsorption and GAC/H2O2 catalytic reaction.
Display omitted
•GAC is the best carrier for organics removal and total iron removal in ROC treatment.•Continuous in-situ GAC regeneration is observed in FBR-Fenton/GAC process.•Fenton reaction, GAC adsorption and GAC/H2O2 contribute to organics removal in ROC.
The Wide Field-of-View Cherenkov Telescope Array (WFCTA) and the Water Cherenkov Detector Array (WCDA) of LHAASO are designed to work in combination for measuring the energy spectra of the cosmic ray ...species over a very wide energy range from a few TeV to 10 PeV. The energy calibration can be achieved with a proven technique of measuring the westward shift of the Moon shadow cast by galactic cosmic rays due to the geomagnetic field. This deflection angle Δ is inversely proportional to the cosmic ray rigidity. The precise measurement of the shifts by WCDA allows us to calibrate its energy scale for energies as high as 35 TeV. Through a set of commonly triggered events, the energy scales can be propagated to WFCTA. The energies of the events can be derived both by WCDA-1 and WFCTA with the median energies 23.4 ± 0.1 ± 1.3 TeV and ( 21.9 ± 0.1 TeV ), respectively, which are consistent within uncertainties. In addition, the propagation of the energy scale is also validated by the Moon shadow based on the same data selection criteria of the commonly triggered events. This paper reports, for the first time, an observational measurement of the absolute energy scale of the primary cosmic rays generating showers observed by air Cherenkov telescopes.
Sperm-associated antigen 5 (SPAG5) is involved in various biological processes. However, the roles of SPAG5 in bladder urothelial carcinoma (BUC) are unknown. This study showed that upregulation of ...SPAG5 was detected frequently in primary BUC tissues, and was associated with significantly worse survival among the 112 patients that underwent radical cystectomy (RC). Up and downregulating the expression of SPAG5 enhanced or inhibited, respectively, the proliferation of BUC cells in vitro and in vivo, and suppressed or enhanced, respectively, apoptosis in vitro and in vivo. Moreover, SPAG5 increased the resistance of BUC cells to chemotherapy-induced apoptosis. Mechanistic investigations showed that SPAG5 promotes proliferation and suppresses apoptosis in BUC at least partially via upregulating Wnt3 through activating the AKT/mTOR signaling pathway. The importance of the SPAG5/AKT-mTOR/Wnt3 axis identified in BUC cell models was confirmed via immunohistochemical analysis of a cohort of human BUC specimens that underwent RC. Collectively, our data suggested that in patients with BUC who underwent RC, high SPAG5 expression is associated with poor survival. In addition, targeting SPAG5 might represent a novel therapeutic strategy to improve the survival of patients with BUC.
PDF
