Abstract
In 2018, a test run with muons in the North Area at CERN was
performed, running parasitically downstream of the COMPASS
spectrometer. The aim of the test was to investigate the elastic
...interactions of muons on atomic electrons, in an experimental
configuration similar to the one proposed by the project MUonE,
which plans to perform a very precise measurement of the
differential cross-section of the elastic interactions.
COMPASS was taking data with a 190 GeV π beam, stopped in a
tungsten beam dump: the muons from these π decays passed through
a setup including a graphite target followed by 10 planes of Si
tracker and a BGO crystal electromagnetic calorimeter placed at the
end of the tracker. The elastic scattering events were selected and
analysed, and compared to expectations from MonteCarlo
simulation. The agreement found was satisfactory and demonstrated
that measuring the angles of the outgoing particles, a clean sample
of elastic interaction could be identified.
The Muon g−2 experiment, E989, is currently taking data at Fermilab with the aim of reducing the experimental error on the muon anomaly by a factor of four and possibly clarifying the current ...discrepancy with the theoretical prediction. A central component of this four-fold improvement in precision is the laser calibration system of the calorimeters, which has to monitor the gain variations of the photo-sensors with a 0.04% precision on the short-term (∼1ms). This is about one order of magnitude better than what has ever been achieved for the calibration of a particle physics calorimeter. The system is designed to monitor also long-term gain variations, mostly due to temperature effects, with a precision below the per mille level. This article reviews the design, the implementation and the performance of the Muon g−2 laser calibration system, showing how the experimental requirements have been met.
The Muon g-2 Experiment at Fermilab (E989) will measure the muon magnetic anomaly with unprecedented precision (0.14 ppm), which yields a factor of 4 improvement with respect to the previous ...measurements at Brookhaven National Laboratory (BNL) (E821). To achieve this goal, the relative response of each calorimeter channel must be calibrated and monitored at a level better than <inline-formula> <tex-math notation="LaTeX">10^{-3} </tex-math></inline-formula> in the time window of the muon fill. The calibration system uses a laser source and photodetectors. The data acquisition (DAQ) of the system is designed around two field-programmable gate array (FPGA)-based boards and a custom crate bus. The front-end board manages the photodetector operation and signal processing and performs a first-level data concentration task. Up to 12 FPGA boards can be housed in a 6U crate. A readout master controls the boards, implements event-building functionalities, manages the monitoring interface, and facilitates calibration and debugging tasks. A gigabit-ethernet interface is used to transfer data to the on-line farm for storage and further processing. Presently, the system is working at Fermi National Accelerator Laboratory (FNAL). In this article, we present the DAQ system design, run control user interface, and system evaluation.
Multiple scattering effects of 12 and 20 GeV electrons on 8 and 20 mm thickness carbon targets have been studied with high-resolution silicon microstrip detectors of the UA9 apparatus at the H8 line ...at CERN . Comparison of the scattering angle between data and GEANT4 simulation shows excellent agreement in the core of the distributions leaving some residual disagreement in the tails.
A comparison of BGO and BSO crystals used in the dual-readout mode Akchurin, N.; Bedeschi, F.; Cardini, A. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
06/2011, Letnik:
640, Številka:
1
Journal Article
Recenzirano
We report on a systematic study of the properties of two high-
Z scintillating crystals, bismuth germanate (BGO) and bismuth silicate (BSO), in view of the possible application of such crystals in ...dual-readout calorimeters. Whereas the light attenuation characteristics of both crystals are about the same, BSO offers a considerably higher Cherenkov light yield, and with a given UV filter the separation between the Cherenkov and scintillation signals is substantially better in this crystal.
In high energy physics experiments, calorimeters are calibrated to produce precise and accurate results. Laser light can be used for calibration when the detectors are sensitive to photons in that ...particular energy range, which is often the case. Moreover, it is not unusual that detection systems consist of hundreds of channels that have to be calibrated independently, which produce stringent requirements on the light distribution system in terms of temporal and spatial stability, energy distribution and timing. Furthermore, the economic factor and the ease of production have to be taken into account. We present a prototype light distribution system, based on a series of optical beamsplitters, developed for the Muon g-2 experiment at Fermilab.
The Muon g−2 Experiment at Fermilab is expected to start data taking in 2017. It will measure the muon anomalous magnetic moment, aμ=(gμ−2)/2 to an unprecedented precision: the goal is 0.14 parts per ...million (ppm). The new experiment will require upgrades of detectors, electronics and data acquisition equipment to handle the much higher data volumes and slightly higher instantaneous rates. In particular, it will require a continuous monitoring and state-of-art calibration of the detectors, whose response may vary on both the millisecond and hour long timescale. The calibration system is composed of six laser sources and a light distribution system will provide short light pulses directly into each crystal (54) of the 24 calorimeters which measure energy and arrival time of the decay positrons. A Laser Control board will manage the interface between the experiment and the laser source, allowing the generation of light pulses according to specific needs including detector calibration, study of detector performance in running conditions, evaluation of DAQ performance. Here we present and discuss the main features of the Laser Control board.
Data handling, reconstruction, and simulation for the KLOE experiment Ambrosino, F.; Antonelli, A.; Antonelli, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2004, Letnik:
534, Številka:
3
Journal Article
Recenzirano
Odprti dostop
The broad physics program of the KLOE experiment is based on the high event rate at the Frascati φ
factory, and calls for an up-to-date system for data acquisition and processing. In this review of ...the KLOE offline environment, the architecture of the data-processing system and the programs developed for data reconstruction and Monte Carlo simulation are described, as well as the various procedures used for data handling and transfer between the different components of the system.
We present a new measurement of the positive muon magnetic anomaly, a_{μ}≡(g_{μ}-2)/2, from the Fermilab Muon g-2 Experiment using data collected in 2019 and 2020. We have analyzed more than 4 times ...the number of positrons from muon decay than in our previous result from 2018 data. The systematic error is reduced by more than a factor of 2 due to better running conditions, a more stable beam, and improved knowledge of the magnetic field weighted by the muon distribution, ωover ˜_{p}^{'}, and of the anomalous precession frequency corrected for beam dynamics effects, ω_{a}. From the ratio ω_{a}/ωover ˜_{p}^{'}, together with precisely determined external parameters, we determine a_{μ}=116 592 057(25)×10^{-11} (0.21 ppm). Combining this result with our previous result from the 2018 data, we obtain a_{μ}(FNAL)=116 592 055(24)×10^{-11} (0.20 ppm). The new experimental world average is a_{μ}(exp)=116 592 059(22)×10^{-11} (0.19 ppm), which represents a factor of 2 improvement in precision.
PDF
