Chemical doping has been demonstrated to be an effective way to realize new functions of graphene as metal‐free catalyst in energy‐related electrochemical reactions. Although efficient catalysis for ...the oxygen reduction reaction (ORR) has been achieved with doped graphene, its performance in the hydrogen evolution reaction (HER) is rather poor. In this study we report that nitrogen and sulfur co‐doping leads to high catalytic activity of nanoporous graphene in HER at low operating potential, comparable to the best Pt‐free HER catalyst, 2D MoS2. The interplay between the chemical dopants and geometric lattice defects of the nanoporous graphene plays the fundamental role in the superior HER catalysis.
Together they're strong: Nitrogen and sulfur co‐doped nanoporous graphene displays high catalytic activity in the hydrogen evolution reaction (HER) at low operating potential. The interplay between the chemical dopants and geometric lattice defects is crucial for the superior HER performance by minimizing the Gibbs free energy of H* absorption.
Multifunctional nanoporous graphene is realized as a heat generator to convert solar illumination into high‐energy steam. The novel 3D nanoporous graphene demonstrates a highly energy‐effective steam ...generation with an energy conversation of 80%.
Graphene-covering is a promising approach for achieving an acid-stable, non-noble-metal-catalysed hydrogen evolution reaction (HER). Optimization of the number of graphene-covering layers and the ...density of defects generated by chemical doping is crucial for achieving a balance between corrosion resistance and catalytic activity. Here, we investigate the influence of charge transfer and proton penetration through the graphene layers on the HER mechanisms of the non-noble metals Ni and Cu in an acidic electrolyte. We find that increasing the number of graphene-covering layers significantly alters the HER performances of Ni and Cu. The proton penetration explored through electrochemical experiments and simulations reveals that the HER activity of the graphene-covered catalysts is governed by the degree of proton penetration, as determined by the number of graphene-covering layers.
The real capacity of graphene and the lithium-storage process in graphite are two currently perplexing problems in the field of lithium ion batteries. Here we demonstrate a three-dimensional bilayer ...graphene foam with few defects and a predominant Bernal stacking configuration, and systematically investigate its lithium-storage capacity, process, kinetics, and resistances. We clarify that lithium atoms can be stored only in the graphene interlayer and propose the first ever planar lithium-intercalation model for graphenic carbons. Corroborated by theoretical calculations, various physiochemical characterizations of the staged lithium bilayer graphene products further reveal the regular lithium-intercalation phenomena and thus fully illustrate this elementary lithium storage pattern of two-dimension. These findings not only make the commercial graphite the first electrode with clear lithium-storage process, but also guide the development of graphene materials in lithium ion batteries.
High-entropy alloys (HEAs) are near-equimolar alloys comprising five or more elements. In recent years, catalysis using HEAs has attracted considerable attention across various fields. Herein, we ...demonstrate the facile synthesis of nanoporous ultra-high-entropy alloys (np-UHEAs) with hierarchical porosity
via
dealloying. These np-UHEAs contain up to 14 elements, namely, Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti. Furthermore, they exhibit high catalytic activities and electrochemical stabilities in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic media, superior to that of commercial Pt/graphene and IrO
2
catalysts. Our results offer valuable insights for the selection of elements as catalysts for various applications.
Nanoporous ultra-high-entropy alloys containing 14 elements (Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti) were obtained by dealloying. The products showed excellent electrocatalytic performance for water splitting in acidic media.
Developing bifunctional electrocatalysts with high activities and long durability for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial toward the practical ...implementation of rechargeable metal–air batteries. Here, a 3D nanoporous graphene (np‐graphene) doped with both N and Ni single atoms/clusters is reported. The predoping of N by chemical vapor deposition (CVD) dramatically increases the Ni doping amount and stability. The resulting N and Ni codoped np‐graphene has excellent electrocatalytic activities for both the ORR and the OER in alkaline aqueous solutions. The synergetic effects of N and Ni dopants are revealed by density functional theory calculations. The free‐standing Ni,N codoped 3D np‐graphene shows great potential as an economical catalyst/electrode for metal–air batteries.
The presence of N facilitates the loading of a high density of isolated Ni single atoms on graphene. The Ni and N codopod 3D nanoporous graphene exhibits greatly enhanced bifunctional oxygen catalytic activities due to the synergetic effect between Ni and N. Due to the superior catalytic performance and structure advantage, a nanoporous graphene‐based all‐solid‐state Zn–air battery exhibits superior performance.
In this investigation, the use of phosphotungstic acid (PWA) and phosphomolybdic acid (PMA) as well as Zn
2+
containing kaolin and bentonite explored for chemical recycling of post-consumer ...poly(ethyleneterephthalate) (PET) wastes have been explored. The clay supported catalysts containing 5wt% of the metals and heteropolyacids (HPAs) synthesized using wet impregnation method. Nitrogen adsorption and desorption studies, SEM–EDX mapping, powder XRD, FTIR and XPS analysis have evaluated effect of metal ions and HPAs loading on the surface area, pore volume, elemental composition and crystalline nature. Total surface area of BET increased with a loading of 5 wt% of Zn
2+
, PWA and PMA on kaolin and bentonite, while the pore volume and pore diameter remain unchanged. SEM and EDAX mapping images showed that the heteropolyacids crystals are well dispersed on the surface and occupied interlayer spaces of the clay support. SEM–EDX showed that bentonite showed a better loading of PWA and PMA compared to kaolin. PET waste water bottles collected from the local market used for the chemical recycling process. The aminolysis reaction using Zn
2+
and PWA loaded on bentonite showed complete depolymerisation of PET wastes to produce 87–98% of BHETA. The glycolysis reaction using the above catalysts showed complete depolymerisation at 180–210 °C and yielded 78–90% of BHET. When comparing the clay, bentonite performed well in terms of heteropolyacid loading and afforded a higher yield of BHET and BHETA because of higher loading of Zn and HPA, as supported by SEM–EDX and XPS. We also examined reusability of the catalysts for glycolysis.
High‐resolution scanning electrochemical cell microscopy (SECCM) is used to image and quantitatively analyze the hydrogen evolution reaction (HER) catalytically active sites of 1H‐MoS2 nanosheets, ...MoS2, and WS2 heteronanosheets. Using a 20 nm radius nanopipette and hopping mode scanning, the resolution of SECCM was beyond the optical microscopy limit and visualized a small triangular MoS2 nanosheet with a side length of ca. 130 nm. The electrochemical cell provides local cyclic voltammograms with a nanoscale spatial resolution for visualizing HER active sites as electrochemical images. The HER activity difference of edge, terrace, and heterojunction of MoS2 and WS2 were revealed. The SECCM imaging directly visualized the relationship of HER activity and number of MoS2 nanosheet layers and unveiled the heterogeneous aging state of MoS2 nanosheets. SECCM can be used for improving local HER activities by producing sulfur vacancies using electrochemical reaction at the selected region.
Nanoscale electrochemical cell: Understanding the hydrogen evolution reaction (HER) mechanism of MoS2 nanosheets requires a comprehensive understanding of the quantitative electrochemical properties and the distribution of active sites in real space. Scanning electrochemical cell microscopy (SECCM) is used to image and quantitatively analyze HER catalytically active sites in 1H MoS2 nanosheets.
Hydrogen production by electrochemical water splitting is a technology with the potential to meet the growing worldwide demand for sustainable and clean energy. However, the development of ...cost-effective catalysts to replace noble metals, such as platinum or ruthenium, remains crucial for large-scale hydrogen production. This study presents the synthesis of a transition non-noble metal-based ternary NiMoCo hybrid nanowire array as an efficient bifunctional electrocatalyst for overall water splitting in 1.0 M KOH electrolyte. The catalyst exhibits a low cell voltage of 1.56 V to achieve a water-splitting current density of 10 mA cm
−2
together with long-term stability with only 5% of the initial current lost after 100 hours. X-ray absorption spectroscopy confirms that the addition of Co to the binary Ni–Mo system results in a highly mixed chemical binding state with modulated electronic structures. Density functional theory (DFT) calculations reveal that the Co atoms on the ternary alloy become catalytically active sites and facilitate adsorption of intermediates by ensuring preferable interactions between the reactants and the catalyst surface in comparison to the binary counterpart. This work provides a new direction along which to activate binary alloys to further enhance their catalytic abilities in overall water splitting.
The application scope of metal–organic frameworks (MOFs) can be extended by rationally designing the architecture and components of MOFs, which can be achieved via a metal-containing solid templated ...strategy. However, this strategy suffers from low efficiency and provides only one specific MOF from one template. Herein, we present a versatile templated strategy in which organic ligands are weaved into hydrogen-bonded organic frameworks (HOFs) for the controllable and scalable synthesis of MOF nanotubes. HOF nanowires assembled from benzene-1,3,5-tricarboxylic acid and melamine via a simple sonochemical approach serve as both the template and precursor to produce MOF nanotubes with varied metal compositions. Hybrid nanotubes containing nanometal crystals and N-doped graphene prepared through a carbonization process show that the optimized NiRuIr alloy@NG nanotube exhibits excellent electrocatalytic HER activity and durability in alkaline media, outperforming most reported catalysts. The strategy proposed here demonstrates a pioneering study of combination of HOF and MOF, which shows great potential in the design of other nanosized MOFs with various architectures and compositions for potential applications.
PDF
