Countering the optical network 'capacity crunch' calls for a radical development in optical fibres that could simultaneously minimize nonlinearity penalties, chromatic dispersion and maximize signal ...launch power. Hollow-core fibres (HCF) can break the nonlinear Shannon limit of solid-core fibre and fulfil all above requirements, but its optical performance need to be significantly upgraded before they can be considered for high-capacity telecommunication systems. Here, we report a new HCF with conjoined-tubes in the cladding and a negative-curvature core shape. It exhibits a minimum transmission loss of 2 dB km
at 1512 nm and a <16 dB km
bandwidth spanning across the O, E, S, C, L telecom bands (1302-1637 nm). The debut of this conjoined-tube HCF, with combined merits of ultralow loss, broad bandwidth, low bending loss, high mode quality and simple structure heralds a new opportunity to fully unleash the potential of HCF in telecommunication applications.
Membrane technology has gained great interest in industrial separation processing over the past few decades owing to its high energy efficiency, small capital investment, environmentally benign ...characteristics, and the continuous operation process. Among various types of membranes, mixed matrix membranes (MMMs) combining the merits of the polymer matrix and inorganic/organic fillers have been extensively investigated. With the rapid development of chemistry and materials science, recent studies have shifted toward the design and application of advanced porous materials as promising fillers to boost the separation performance of MMMs. Here, first a comprehensive overview is provided on the choices of advanced porous materials recently adopted in MMMs, including metal–organic frameworks, porous organic frameworks, and porous molecular compounds. Novel trends in MMMs induced by these advanced porous fillers are discussed in detail, followed by a summary of applying these MMMs for gas and liquid separations. Finally, a concise conclusion and current challenges toward the industrial implementation of MMMs are outlined, hoping to provide guidance for the design of high‐performance membranes to meet the urgent needs of clean energy and environmental sustainability.
The recent research progress in exploring various types of advanced porous materials as promising fillers in mixed matrix membranes (MMMs) is summarized. Along with this, novel MMM design and enhanced membrane separation performance induced by these advanced porous fillers are discussed in detail. Finally, current challenges and future directions for industrial implementation of these MMMs are highlighted.
Display omitted
•Green natural versatile adsorbent (efficiently remove Cr(VI), Pb(II) and dyes).•Higher adsorption performance under batch and fixed-bed condition.•Convenient for large scale ...application.•Excellent stability, reusability and convenient separation.
Chitosan is highly suitable for removing metal ions and dyes from water; however, the sorption performance, stability and recycling are still critical issues in practical applications. Herein, polydopamine-modified-chitosan (CS-PDA) aerogels were synthesized through dopamine self-polymerization and glutaraldehyde cross-linking reactions to enhance the adsorption capacity and acid resistance of chitosan. The self-polymerization of dopamine and gelation of chitosan were accomplished simultaneously, simplifying the synthesis process of CS-PDA aerogels, which is meaningful for the popularization and industrial application of adsorbent. CS-PDA exhibited superior adsorption performances in the removal of Cr(VI), Pb(II) and organic dyes. Adsorption isotherms and kinetic data were well fitted by Langmuir and pseudo-second-order kinetic models. The maximum adsorption capacities of CS-PDA for Cr(VI) and Pb(II) were 374.4 and 441.2 mg g−1, respectively. After eight cycles, adsorption capacity of CS-PDA showed no obvious decline. These superiorities make CS-PDA a promising multifunctional adsorbent for the purification of metal ions and dyes.
The enrichment of radioactive iodine in the waste of nuclear industries threatens human health, and thus the efficient capture of iodine has attracted a great deal of attention in recent years. ...Porous organic polymers (POPs) and metal-organic frameworks (MOFs), new classes of porous materials, act as outstanding candidate adsorbent materials in this field due to their high surface areas, permanent tunable porosities, controllable structures, high thermal/chemical stabilities, versatility in molecular design and potential for post-synthetic modification. Herein, this review focuses on the research progress of these two types of porous materials for highly efficient iodine capture. We analyze and discuss some valid strategies for enhancing their iodine uptake, including increasing their surface area and pore volume, using organic building units with unique configurations and functions, introducing chemical functional groups to provide high-enthalpy binding sites, and further processing of POP and MOF materials. Indeed, there are many special structural and functional features found in porous POP and MOF materials, which make them unique and merit further exploration. Thus, we expect to see their usage grow as this field progresses.
This review focuses on the research progress of the efficient iodine capture in porous POP and MOF materials.
The aspartate aminotransferase‐to‐platelet ratio index (APRI), a tool with limited expense and widespread availability, is a promising noninvasive alternative to liver biopsy for detecting hepatic ...fibrosis. The objective of this study was to update the 2007 meta‐analysis to systematically assess the accuracy of APRI in predicting significant fibrosis, severe fibrosis, and cirrhosis stage in hepatitis C virus (HCV) monoinfected and HCV / human immunodeficiency virus (HIV) coinfected individuals. Studies comparing APRI versus biopsy in HCV patients were identified via a thorough literature search. Areas under summary receiver operating characteristic curves (AUROC), sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) were used to examine the APRI accuracy for the diagnosis of significant fibrosis, severe fibrosis, and cirrhosis. Heterogeneity was explored using meta‐regression. Twenty‐one additional studies were eligible for the update and, in total, 40 studies were included in this review (n = 8,739). The summary AUROC of the APRI for the diagnosis of significant fibrosis, severe fibrosis, and cirrhosis were 0.77, 0.80, and 0.83, respectively. For significant fibrosis, an APRI threshold of 0.7 was 77% sensitive and 72% specific. For severe fibrosis, a threshold of 1.0 was 61% sensitive and 64% specific. For cirrhosis, a threshold of 1.0 was 76% sensitive and 72% specific. Moreover, we found that the APRI was less accurate for the identification of significant fibrosis, severe fibrosis, and cirrhosis in HIV/HCV coinfected patients. Conclusion: Our large meta‐analysis suggests that APRI can identify hepatitis C‐related fibrosis with a moderate degree of accuracy. Application of this index may decrease the need for staging liver biopsy specimens among chronic hepatitis C patients. (HEPATOLOGY 2011)
Abstract
Background
The duration of humoral and T and B cell response after the infection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) remains unclear.
Methods
We performed a ...cross-sectional study to assess the virus-specific antibody and memory T and B cell responses in coronavirus disease 2019 (COVID-19) patients up to 343 days after infection. Neutralizing antibodies and antibodies against the receptor-binding domain, spike, and nucleoprotein of SARS-CoV-2 were measured. Virus-specific memory T and B cell responses were analyzed.
Results
We enrolled 59 patients with COVID-19, including 38 moderate, 16 mild, and 5 asymptomatic patients; 31 (52.5%) were men and 28 (47.5%) were women. The median age was 41 years (interquartile range, 30–55). The median day from symptom onset to enrollment was 317 days (range 257 to 343 days). We found that approximately 90% of patients still have detectable immunoglobulin (Ig)G antibodies against spike and nucleocapsid proteins and neutralizing antibodies against pseudovirus, whereas ~60% of patients had detectable IgG antibodies against receptor-binding domain and surrogate virus-neutralizing antibodies. The SARS-CoV-2-specific IgG+ memory B cell and interferon-γ-secreting T cell responses were detectable in more than 70% of patients.
Conclusions
Severe acute respiratory syndrome coronavirus 2-specific immune memory response persists in most patients approximately 1 year after infection, which provides a promising sign for prevention from reinfection and vaccination strategy.
SARS-CoV-2-specific antibody and memory T and B cell responses were detectable in most patients approximately 1 year after infection, indicating that durable immunity against secondary COVID-19 disease is possible in most individuals.
Given the environmental benefits, poly(vinylidene fluoride) (PVDF)‐based composite powder coating was developed without using any harmful solvent. However, it still remains poor adhesion to ...substrates and low compatibility to acrylic resin issues. To address these challenges, PVDF was grafted with glycidyl methacrylate (GMA) through a facile and scalable reactive extrusion method. The resulting product, PVDF‐g‐GMA, was then mixed with different contents of polymethyl methacrylate (PMMA), and the mixing was sprayed onto aluminum substrates. The PVDF‐g‐GMA/PMMA powder coating shows the excellent adhesion and corrosion resistance, particularly when the PMMA content is 30 wt%, owning to the good compatibility of PVDF‐g‐GMA and PMMA. This work opens up a new possibilities for the development of advanced composite powder coatings with improved performance characteristics.
In this article, the glycidyl methacrylate was successfully grafted onto polyvinylidene fluoride (PVDF) molecular chain by a simple melt extrusion grafting method. Then the grafts were blended with different contents of polymethyl methacrylate to prepare PVDF powder coating with good adhesion and high corrosion resistance.
Oxidative stress and inflammation are proved to be critical for the pathogenesis of diabetes mellitus. Berberine (BBR) is a natural compound isolated from plants such as Coptis chinensis and ...Hydrastis canadensis and with multiple pharmacological activities. Recent studies showed that BBR had antioxidant and anti-inflammatory activities, which contributed in part to its efficacy against diabetes mellitus. In this review, we summarized the antioxidant and anti-inflammatory activities of BBR as well as their molecular basis. The antioxidant and anti-inflammatory activities of BBR were noted with changes in oxidative stress markers, antioxidant enzymes, and proinflammatory cytokines after BBR administration in diabetic animals. BBR inhibited oxidative stress and inflammation in a variety of tissues including liver, adipose tissue, kidney and pancreas. Mechanisms of the antioxidant and anti-inflammatory activities of BBR were complex, which involved multiple cellular kinases and signaling pathways, such as AMP-activated protein kinase (AMPK), mitogen-activated protein kinases (MAPKs), nuclear factor erythroid-2-related factor-2 (Nrf2) pathway, and nuclear factor-κB (NF-κB) pathway. Detailed mechanisms and pathways for the antioxidant and anti-inflammatory activities of BBR still need further investigation. Clarification of these issues could help to understand the pharmacology of BBR in the treatment of diabetes mellitus and promote the development of antidiabetic natural products.
Abstract The detection and identification of fan rotor foreign object impact events during the working process of aero-engines are crucial to the safety and security of aircraft flight. Through the ...numerical simulation method based on finite element and the foreign object impact test platform to simulate the process of real engine impact by foreign objects, the rule of fan rotor blade foreign object impact and the monitoring and identification method were studied. Meanwhile, aiming at the problems of high difficulty and low accuracy in identifying the impact of foreign objects on the fan by the airborne parameters and added vibration parameters, the non-contact vibration measurement method based on blade tip timing was used to obtain the blade vibration displacement under different fan speed, foreign matter mass and impact velocity. The numerical simulation and experimental results show that the change trend of the vibration displacement of the rotor tip of the fan is consistent with that of the numerical simulation. And with the increase of the foreign object projectile mass, the vibration displacement of the blade tip caused by the impact of the foreign object on the fan blade increases. In addition, the impact velocity of the foreign object has little effect on the vibration displacement of the blade tips after impact. Furthermore, the vibration displacement of the blade tip caused by the impact of foreign objects first increases and then decreases with increasing speed.