Polyaniline is a conducting polymer with incredible promise, but it has had limited use due to poor reaction control and processability associated with conventional morphologies. Polyaniline ...nanofibers, on the other hand, have demonstrated, through manufacturing techniques discovered during the past decade, increased processability, higher surface area, and improved consistency and stability in aqueous dispersions, which are finally allowing for expanded commercial development of this promising polymer. This review explores some intriguing applications of polyaniline nanofibers, as well as the advantages and remaining challenges in developing better products using polyaniline in this new morphology.
Nanostructured polyaniline is the key to greater success of this unique conducting polymer.
For decades, borides have been primarily studied as crystallographic oddities. With such a wide variety of structures (a quick survey of the Inorganic Crystal Structure Database counts 1253 entries ...for binary boron compounds!), it is surprising that the applications of borides have been quite limited despite a great deal of fundamental research. If anything, the rich crystal chemistry found in borides could well provide the right tool for almost any application. The interplay between metals and the boron results in even more varied material's properties, many of which can be tuned via chemistry. Thus, the aim of this review is to reintroduce to the scientific community the developments in boride crystal chemistry over the past 60 years. We tie structures to material properties, and furthermore, elaborate on convenient synthetic routes toward preparing borides.
The world of metal borides is summarized, a remarkable class of compounds with a wide range of different possible structures formed based on stoichiometry, which dictate the properties of the resulting material and lead to a host of possible applications.
The rapid development of miniaturized electronic devices has increased the demand for compact on-chip energy storage. Microscale supercapacitors have great potential to complement or replace ...batteries and electrolytic capacitors in a variety of applications. However, conventional micro-fabrication techniques have proven to be cumbersome in building cost-effective micro-devices, thus limiting their widespread application. Here we demonstrate a scalable fabrication of graphene micro-supercapacitors over large areas by direct laser writing on graphite oxide films using a standard LightScribe DVD burner. More than 100 micro-supercapacitors can be produced on a single disc in 30 min or less. The devices are built on flexible substrates for flexible electronics and on-chip uses that can be integrated with MEMS or CMOS in a single chip. Remarkably, miniaturizing the devices to the microscale results in enhanced charge-storage capacity and rate capability. These micro-supercapacitors demonstrate a power density of ~200 W cm-3, which is among the highest values achieved for any supercapacitor.
Ongoing technological advances in diverse fields including portable electronics, transportation, and green energy are often hindered by the insufficient capability of energy-storage devices. By ...taking advantage of two different electrode materials, asymmetric supercapacitors can extend their operating voltage window beyond the thermodynamic decomposition voltage of electrolytes while enabling a solution to the energy storage limitations of symmetric supercapacitors. This review provides comprehensive knowledge to this field. We first look at the essential energy-storage mechanisms and performance evaluation criteria for asymmetric supercapacitors to understand the wide-ranging research conducted in this area. Then we move to the recent progress made for the design and fabrication of electrode materials and the overall structure of asymmetric supercapacitors in different categories. We also highlight several key scientific challenges and present our perspectives on enhancing the electrochemical performance of future asymmetric supercapacitors.
Over the past decade, electrochemical energy storage (EES) devices have greatly improved, as a wide variety of advanced electrode active materials and new device architectures have been developed. ...These new materials and devices should be evaluated against clear and rigorous metrics, primarily based on the evidence of real performances. A series of criteria are commonly used to characterize and report performance of EES systems in the literature. However, as advanced EES systems are becoming more and more sophisticated, the methodologies to reliably evaluate the performance of the electrode active materials and EES devices need to be refined to realize the true promise as well as the limitations of these fast-moving technologies, and target areas for further development. In the absence of a commonly accepted core group of metrics, inconsistencies may arise between the values attributed to the materials or devices and their real performances. Herein, we provide an overview of the energy storage devices from conventional capacitors to supercapacitors to hybrid systems and ultimately to batteries. The metrics for evaluation of energy storage systems are described, although the focus is kept on capacitive and hybrid energy storage systems. In addition, we discuss the challenges that still need to be addressed for establishing more sophisticated criteria for evaluating EES systems. We hope this effort will foster ongoing dialog and promote greater understanding of these metrics to develop an international protocol for accurate assessment of EES systems.
Electrochemical energy storage (EES) materials and devices should be evaluated against clear and rigorous metrics to realize the true promises as well as the limitations of these fast-moving technologies.
A facile method to convert biomolecule‐based carbon nanodots (CNDs) into high‐surface‐area 3D‐graphene networks with excellent electrochemical properties is presented. Initially, CNDs are synthesized ...by microwave‐assisted thermolysis of citric acid and urea according to previously published protocols. Next, the CNDs are annealed up to 400 °C in a tube furnace in an oxygen‐free environment. Finally, films of the thermolyzed CNDs are converted into open porous 3D turbostratic graphene (3D‐ts‐graphene) networks by irradiation with an infrared laser. Based upon characterizations using scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, Fourier‐transform infrared spectroscopy, and Raman spectroscopy, a feasible reaction mechanism for both the thermolysis of the CNDs and the subsequent laser conversion into 3D‐ts‐graphene is presented. The 3D‐ts‐graphene networks show excellent morphological properties, such as a hierarchical porous structure and a high surface area, as well as promising electrochemical properties. For example, nearly ideal capacitive behavior with a volumetric capacitance of 27.5 mF L−1 is achieved at a current density of 560 A L−1, which corresponds to an energy density of 24.1 mWh L−1 at a power density of 711 W L−1. Remarkable is the extremely fast charge–discharge cycling rate with a time constant of 3.44 ms.
Small‐molecule‐based carbon nanodots serve as precursors for 3D turbostratic graphene in a simple laser‐assisted conversion process. Very high conductivity, high capacitance, and extremely fast charging rates render 3D‐ts‐graphene an interesting biomass‐derived material for supercapacitor applications.
Known for more than 150 years, polyaniline is the oldest and potentially one of the most useful conducting polymers because of its facile synthesis, environmental stability, and simple acid/base ...doping/dedoping chemistry. Because a nanoform of this polymer could offer new properties or enhanced performance, nanostructured polyaniline has attracted a great deal of interest during the past few years. This Account summarizes our recent research on the syntheses, processing, properties, and applications of polyaniline nanofibers. By monitoring the nucleation behavior of polyaniline, we demonstrate that high-quality nanofibers can be readily produced in bulk quantity using the conventional chemical oxidative polymerization of aniline. The polyaniline nanostructures formed using this simple method have led to a number of exciting discoveries. For example, we can readily prepare aqueous polyaniline colloids by purifying polyaniline nanofibers and controlling the pH. The colloids formed are self-stabilized via electrostatic repulsions without the need for any chemical modification or steric stabilizer, thus providing a simple and environmentally friendly way to process this polymer. An unusual nanoscale photothermal effect called “flash welding”, which we discovered with polyaniline nanofibers, has led to the development of new techniques for making asymmetric polymer membranes and patterned nanofiber films and creating polymer-based nanocomposites. We also demonstrate the use of flash-welded polyaniline films for monolithic actuators. Taking advantage of the unique reduction/oxidation chemistry of polyaniline, we can decorate polyaniline nanofibers with metal nanoparticles through in situ reduction of selected metal salts. The resulting polyaniline/metal nanoparticle composites show promise for use in ultrafast nonvolatile memory devices and for chemical catalysis. In addition, the use of polyaniline nanofibers or their composites can significantly enhance the sensitivity, selectivity, and response time of polyaniline-based chemical sensors. By combining straightforward synthesis and composite formation with exceptional solution processability, we have developed a range of new useful functionalities. Further research on nanostructured conjugated polymers holds promise for even more exciting discoveries and intriguing applications.
Materials science. Graphene-based materials Li, Dan; Kaner, Richard B
Science (American Association for the Advancement of Science),
2008-May-30, 20080530, Letnik:
320, Številka:
5880
Journal Article
Although electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, charge and discharge faster than batteries, they are still limited by low energy densities and slow rate ...capabilities. We used a standard LightScribe DVD optical drive to do the direct laser reduction of graphite oxide films to graphene. The produced films are mechanically robust, show high electrical conductivity (1738 Siemens per meter) and specific surface area (1520 square meters per gram), and can thus be used directly as EC electrodes without the need for binders or current collectors, as is the case for conventional ECs. Devices made with these electrodes exhibit ultrahigh energy density values in different electrolytes while maintaining the high power density and excellent cycle stability of ECs. Moreover, these ECs maintain excellent electrochemical attributes under high mechanical stress and thus hold promise for high-power, flexible electronics.
The demand for flexible/wearable electronic devices that have aesthetic appeal and multi-functionality has stimulated the rapid development of flexible supercapacitors with enhanced electrochemical ...performance and mechanical flexibility. After a brief introduction to flexible supercapacitors, we summarize current progress made with graphene-based electrodes. Two recently proposed prototypes for flexible supercapacitors, known as micro-supercapacitors and fiber-type supercapacitors, are then discussed. We also present our perspective on the development of graphene-based electrodes for flexible supercapacitors.
The recent advances in developing graphene-based materials for flexible supercapacitors are summarized in this review.
PDF
