Wind power is still the most promising renewable energy in the year of 2013. The wind turbine system (WTS) started with a few tens of kilowatt power in the 1980s. Now, multimegawatt wind turbines are ...widely installed even up to 6-8 MW. There is a widespread use of wind turbines in the distribution networks and more and more wind power stations, acting as power plants, are connected directly to the transmission networks. As the grid penetration and power level of the wind turbines increase steadily, the wind power starts to have significant impacts to the power grid system. Therefore, more advanced generators, power electronic systems, and control solutions have to be introduced to improve the characteristics of the wind power plant and make it more suitable to be integrated into the power grid. Meanwhile, there are also some emerging technology challenges, which need to be further clarified and investigated. This paper gives an overview and discusses some development trends in the technologies used for wind power systems. First, the developments of technology and market are generally discussed. Next, several state-of-the-art wind turbine concepts, as well as the corresponding power electronic converters and control structures, are reviewed, respectively. Furthermore, grid requirements and the technology challenges for the future WTS are also addressed.
A
bstract
Defect extremal surface is defined by extremizing the Ryu-Takayanagi formula corrected by the quantum defect theory. This is interesting when the AdS bulk contains a defect brane (or ...string). We introduce a defect extremal surface formula for reflected entropy, which is a mixed state generalization of entanglement entropy measure. Based on a decomposition procedure of an AdS bulk with a brane, we demonstrate the equivalence between defect extremal surface formula and island formula for reflected entropy in AdS
3
/BCFT
2
. We also compute the evolution of reflected entropy in evaporating black hole model and find that defect extremal surface formula agrees with island formula.
The three-level neutral-point (NP)-clamped (3L-NPC) converter is a promising multilevel topology in the application of megawatt wind power generation systems. However, the growing requirements by ...grid codes may impose high stress and even give reliability problem to this converter topology. This paper investigates the loss and thermal performances of a 10-MW 3L-NPC wind power inverter undergoing low-voltage ride-through (LVRT) operation. A series of new space vector modulation methods is then proposed to relocate the thermal loading among the power switching devices. It is concluded that, with the proposed modulation methods, the thermal distribution in the 3L-NPC wind power inverter undergoing LVRT becomes more equal, and the junction temperature of the most stressed devices can be also relieved. Also, the control ability of the dc-bus NP potential, which is one of the crucial considerations for the 3L-NPC converter, is even more improved by the proposed modulation methods.
The thermal stress of power electronic components is one of the most important causes of their failure. Proper thermal management plays an important role for more reliable and cost-effective energy ...conversion. As one of the most vulnerable and expensive components, power semiconductor components are the focus of this paper. Possible approaches to control the semiconductor junction temperature are discussed in this paper, along with the implementation in several emerging applications. The modification of the control variables at different levels (modulation, control, and system) to alter the loss generation or distribution is analyzed. Some of the control solutions presented in the literature, which showed experimentally that the thermal stress can be effectively reduced, are reviewed in detail. These results are often mission-profile dependent and the controller needs to be tuned to reach the desired cost-benefit tradeoff. This paper analyzes also the many open questions of this research area. Among them, it is worth highlighting that a verification of the actual lifetime extension is still missing.
Detailed thermal dynamics of high-power IGBT modules are important information for the reliability analysis and thermal design of power electronic systems. However, the existing thermal models have ...their limits to correctly predict these complicated thermal behavior in the IGBTs: The typically used thermal model based on one-dimensional RC lumps have limits to provide temperature distributions inside the device; moreover, some variable factors in the real-field applications like the cooling and heating conditions of the converter cannot be adapted. On the other hand, the more advanced three-dimensional (3-D) thermal models based on finite-element method (FEM) need massive computations, which make the long-term thermal dynamics difficult to calculate. In this paper, a new lumped 3-D thermal model is proposed, which can be easily characterized from FEM simulations and can acquire the critical thermal distribution under long-term studies. Meanwhile, the boundary conditions for the thermal analysis are modeled and included, which can be adapted to different real-field applications of power electronic converters. Finally, the accuracy of the proposed thermal model is verified by FEM simulations and experimental results show a good agreement.
A rockfall is a typical dynamic problem of a discontinuous block system originating from a dangerous rock mass and always presents serious geo-hazards along highway slopes in mountainous areas. This ...study aims to investigate the failure mechanisms and movement characteristics of rockfalls through a three-dimensional discontinuous deformation analysis (3D DDA) method and attempts to comprehensively examine the complicated kinematic process of rockfall disasters. In terms of the initial failure and post-movement characteristics (i.e., motion trajectory and kinetic energy) of a rockfall, the effectiveness of 3D DDA is verified by comparing its results with those of laboratory experiments. Taking the K4580 typical high-steep slope undergoing rockfalls along the G318 national highway in Tibet as an example, the initiation and failure of a single boulder and a large-scale rock mass at the source area were simulated by 3D DDA. Then, the movement characteristics of the boulder and massive collapsing rocks along the slopes of different geometrical characteristics, i.e., the slopes before the landslide and after the shallow and deep landslides, were studied. The results show that the 3D DDA has significant advantages in analysing the failure mechanisms of slope rockfalls and can satisfactorily simulate the spatial movement (e.g., lateral deviation and deflection) of blocks by considering the 3D geometry of the slopes and blocks. The 3D DDA numerical simulation can predict the movement range, deposition position, and affected area of rockfall disasters, which can provide a basis for formulating disaster prevention countermeasures in actual projects.
The steady growth of installed wind power together with the upscaling of the single wind turbine power capability has pushed the research and development of power converters toward full-scale power ...conversion, lowered cost pr kW, increased power density, and also the need for higher reliability. In this paper, power converter technologies are reviewed with focus on existing ones and on those that have potential for higher power but which have not been yet adopted due to the important risk associated with the high-power industry. The power converters are classified into single- and multicell topologies, in the latter case with attention to series connection and parallel connection either electrical or magnetic ones (multiphase/windings machines/transformers). It is concluded that as the power level increases in wind turbines, medium-voltage power converters will be a dominant power converter configuration, but continuously cost and reliability are important issues to be addressed.
Human activities have shaped large-scale distributions of many species, driving both range contractions and expansions. Species differ naturally in range size, with small-range species concentrated ...in particular geographic areas and potentially deviating ecologically from widespread species. Hence, species’ responses to human activities may be influenced by their geographic range sizes, but if and how this happens are poorly understood. Here, we use a comprehensive distribution database and species distribution modeling to examine if and how human activities have affected the extent to which 9,701 vascular plants fill their climatic potential ranges in China. We find that narrow-ranged species have lower range filling and widespread species have higher range filling in the human-dominated southeastern part of China, compared with their counterparts distributed in the less human-influenced northwestern part. Variations in range filling across species and space are strongly associated with indicators of human activities (human population density, human footprint, and proportion of cropland) even after controlling for alternative drivers. Importantly, narrow-ranged and widespread species show negative and positive range-filling relationships to these human indicators, respectively. Our results illustrate that floras risk biotic homogenization as a consequence of anthropogenic activities, with narrow-ranged species becoming replaced by widespread species. Because narrow-ranged species are more numerous than widespread species in nature, negative impacts of human activities will be prevalent. Our findings highlight the importance of establishing more protected areas and zones of reduced human activities to safeguard the rich flora of China.
As a key component in the wind turbine system, the power electronic converter and its power semiconductors suffer from complicated power loadings related to environment, and are proven to have high ...failure rates. Therefore, correct lifetime estimation of wind power converter is crucial for the reliability improvement and also for cost reduction of wind power technology. Unfortunately, the existing lifetime estimation methods for the power electronic converter are not yet suitable in the wind power application, because the comprehensive mission profiles are not well specified and included. Consequently, a relative more advanced approach is proposed in this paper, which is based on the loading and strength analysis of devices and takes into account different time constants of the thermal behaviors in power converter. With the established methods for loading and lifetime estimation for power devices, more detailed information of the lifetime-related performance in wind power converter can be obtained. Some experimental results are also included to validate the thermal behavior of power device under different mission profiles.
A
bstract
We compute the surface defect contribution to Rényi entropy and supersymmetric Rényi entropy in six dimensions. We first compute the surface defect contribution to Rényi entropy for free ...fields, which verifies a previous formula about entanglement entropy with surface defect. Using conformal map to
S
β
1
×
H
d
−
1
we develop a heat kernel approach to compute the defect contribution to Rényi entropy, which is applicable for
p
-dimensional defect in general
d
-dimensional free fields. Using the same geometry
S
β
1
×
H
5
with an additional background field, one can construct the supersymmetric refinement of the ordinary Rényi entropy for six-dimensional (2, 0) theories. We find that the surface defect contribution to supersymmetric Rényi entropy has a simple scaling as polynomial of Rényi index in the large
N
limit. We also discuss how to connect the free field results and large
N
results.
PDF
